Toro 20199, 20200 Storage, General Information, Preparing the Fuel System, Preparing the Engine

Page 25

Storage

Store the machine in a cool, clean, dry place.

General Information

1.Perform the recommended annual maintenance procedures; refer to the Recommended Maintenance Schedule under Maintenance (page 16).

2.Clean under the machine; refer to Washing Underneath the Machine (page 24).

3.Remove chaff, dirt, and grime from the external parts of the engine, the shrouding, and the top of the machine.

4.Check the condition of the blades; refer to Inspecting the Blades (page 21).

5.Service the air filter; refer to Servicing the Air Filter (page 17).

6.Tighten all nuts, bolts, and screws.

7.Touch up all rusted or chipped paint surfaces with paint available from an Authorized Service Dealer.

8.Charge the battery for 24 hours, then unplug the battery charger and store the machine in an unheated area. If you must store the machine in a heated area, you must charge the battery every 90 days (electric-start model only).

9.Fold the handle for storage; refer to Adjusting the Handle Height (page 10).

Preparing the Fuel System

WARNING

Gasoline can vaporize if you store it over long periods of time and explode if it comes into contact with an open flame.

•Do not store gasoline over long periods of time.

•Do not store the machine with gasoline in the fuel tank or the carburetor in an enclosure with an open flame. (For example, a furnace or a water heater pilot light.)

•Allow the engine to cool before storing it in any enclosure.

On the last refueling of the year, add fuel stabilizer to the fuel as directed by the engine manufacturer. Empty the fuel tank when mowing the last time before storing the machine.

1.Run the machine until the engine stops from running out of fuel.

2.Start the engine again.

3.Allow the engine to run until it stops. When you can no longer start the engine, it is sufficiently dry.

Preparing the Engine

1.While the engine is still warm, change the engine oil; refer to Changing the Engine Oil (page 17).

2.Remove the spark plug.

3.Using an oil can, add about 1 oz. (30 ml), of motor oil to the engine through the spark-plug hole.

4.Slowly pull the starter rope several times to distribute oil throughout the cylinder.

5.Install the spark plug but do not connect the wire to the spark plug. Secure the wire so that it does not come into contact with the spark plug.

Removing the Machine from Storage

1.Unfold the handle; refer to Adjusting the Handle Height (page 10).

2.Check and tighten all fasteners.

3.Remove the spark plug and spin the engine rapidly using the starter to blow excess oil from the cylinder.

4.Inspect the spark plug and replace it if it is dirty, worn, or cracked; refer to the Engine Operator’s Manual.

5.Install the spark plug and tighten it to the recommended torque of 180 in-lb (20 N-m).

6.Perform any needed maintenance procedures; refer to Maintenance (page 16).

7.Check the engine oil level; refer to Checking the Engine Oil Level (page 9).

8.Fill the fuel in the fuel tank with fresh gasoline; refer to Recommended Fuel (page 8).

9.Charge the battery; refer to

Charging the Battery (page 18) (electric-start model only).

10.Connect the wire to the spark plug.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents TimeMaster 30in Lawn Mower IntroductionGeneral Operation SafetySlope Operation General Service ServiceChildren Safe Handling of Gasoline114-7982 Safety and Instructional DecalsNo Parts Required Procedure SetupAssembling the Handle Parts needed for this procedure Installing the Blade-control BarFilling the Engine with Oil Product Overview Charging the BatteryOperation Using Fuel Stabilizer/ConditionerBefore Starting Recommended Fuel Filling the Fuel TankChecking the Engine Oil Level Adjusting the Cutting HeightStarting the Engine Adjusting the Handle HeightStandard Model Electric-start ModelStopping the Engine Using the Self-propel DriveEngaging the Blade Not Using the Grass Bag Using the Grass BagDisengaging the Blade Checking the Blade-stop System OperationRecycling the Clippings Installing the Grass BagBagging the Clippings Side-discharging the Clippings Installing the Side-discharge ChuteRemoving the Grass Bag Removing the Side-discharge ChuteGeneral Mowing Tips Operating TipsCutting Grass Cutting LeavesRecommended Maintenance Schedules MaintenancePreparing for Maintenance Changing the Engine Oil Servicing the Air FilterService Interval Every 25 hours Removing the Old Battery Replacing the BatteryInstalling the New Battery Replacing the FuseServicing the Blade-drive System Adjusting the Self-propel Drive CableServicing the Cutting Blades Preparing to Service the Cutting BladesInspecting the Blades Removing the Blades Checking for Bent BladesInstalling the Blades Washing Underneath the Machine General Information StoragePreparing the Fuel System Preparing the EnginePage Page Toro Total Coverage Guarantee

20199, 20200 specifications

The Toro 20200 and 20199 are two versatile and innovative products designed to enhance landscaping and maintenance tasks for both professionals and homeowners. These models offer a range of features and technologies that cater to various needs, making them a top choice for turf care.

One of the primary features of the Toro 20200 is its efficient 21-inch cutting deck. This deck size provides the perfect balance between maneuverability and cutting efficiency, allowing users to tackle both small and medium-sized yards with ease. The 20199 model boasts similar dimensions, ensuring it can fit into tight spaces while still covering considerable ground.

Both models are equipped with Toro's proprietary Recycler cutting system. This technology allows for superior mulching capabilities, ensuring grass clippings are finely shredded and distributed back onto the lawn. This process not only enhances the appearance of the lawn but also contributes to its health by returning essential nutrients to the soil.

The power behind the Toro 20200 and 20199 comes from their robust engines. Both models utilize efficient gas engines that deliver ample power for cutting through tough grass, while also being designed for fuel efficiency. This ensures longer run times between refueling, saving both time and energy for users.

Ease of use is a hallmark of the Toro brand, and these models exemplify that. The self-propelled drive system on both the 20200 and 20199 models simplifies operation by allowing users to set their walking pace, making mowing less strenuous. Additionally, the adjustable cutting heights provide versatility for various grass types, ensuring optimal results throughout the growing season.

Durability is another key characteristic, with both models featuring sturdy construction to withstand the rigors of regular use. This durability is complemented by Toro's commitment to customer support, ensuring that users can rely on their equipment for years to come.

In summary, the Toro 20200 and 20199 are exceptional lawn mowers that combine efficiency, power, and user-friendly features. With their advanced technologies and robust design, these models stand out in the marketplace, making lawn care an achievable task for everyone, from novice gardeners to seasoned landscapers. Whether for residential or commercial use, these mowers offer reliability and performance to keep lawns looking their best.
Top Page Image Contents