Nilfisk-Advance America 56316025 (R32-C), 56316026 (R32-C) manual Symbols, English / A-3

Page 3

ENGLISH / A-3

CAUTIONS AND WARNINGS

SYMBOLS

Nilfisk-Advance uses the symbols below to signal potentially dangerous conditions. Always read this information carefully and take the necessary steps to protect personnel and property.

DANGER!

Is used to warn of immediate hazards that will cause severe personal injury or death.

WARNING!

Is used to call attention to a situation that could cause severe personal injury.

CAUTION!

Is used to call attention to a situation that could cause minor personal injury or damage to the machine or other property. Read all instructions before using.

GENERAL SAFETY INSTRUCTIONS

Specific Cautions and Warnings are included to warn you of potential danger of machine damage or bodily harm.

WARNING!

•This machine shall be used only by properly trained and authorized persons.

•While on ramps or inclines, avoid sudden stops when loaded. Avoid abrupt sharp turns. Use low speed down hills. Clean only while ascending (driving up) the ramp.

•Keep sparks, flame and smoking materials away from batteries. Explosive gases are vented during normal operation.

•Charging the batteries produces highly explosive hydrogen gas. Charge batteries only in well-ventilated areas, away from open flame. Do not smoke while charging the batteries.

•Remove all jewelry when working near electrical components.

•Turn the key switch off (O) and disconnect the batteries before servicing electrical components.

•Never work under a machine without safety blocks or stands to support the machine.

•Do not dispense flammable cleaning agents, operate the machine on or near these agents, or operate in areas where flammable liquids exist.

•Do not clean this machine with a pressure washer.

•Only use the brushes provided with the appliance or those specified in the instruction manual. The use of other brushes may impair safety.

CAUTION!

•This machine is not approved for use on public paths or roads.

•This machine is not suitable for picking up hazardous dust.

•Do not use scarifier discs and grinding stones. Nilfisk-Advance will not be held responsible for any damage to floor surfaces caused by scarifiers or grinding stones (can also cause damage to the brush drive system).

•When operating this machine, ensure that third parties, particularly children, are not endangered.

•Before performing any service function, carefully read all instructions pertaining to that function.

•Do not leave the machine unattended without first turning the key switch off (O), removing the key and applying the parking brake.

•Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.

•Take precautions to prevent hair, jewelry, or loose clothing from becoming caught in moving parts.

•Use caution when moving this machine in below freezing temperature conditions. Any water in the solution, recovery or detergent tanks or in the hose lines could freeze, causing damage to valves and fittings. Flush with windshield washer fluid.

•The batteries must be removed from the machine before the machine is scrapped. The disposal of the batteries should be safely done in accordance with your local environmental regulations.

•Do not use on surfaces having a gradient exceeding that marked on the machine.

•All doors and covers are to be positioned as indicated in the instruction manual before using the machine.

SAVE THESE INSTRUCTIONS

Adhancer™ R28-C, R32-C / BR 800S TRIO EDS™ - 56041647 - A-3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents BR 800S Trio EDS English English / A-3 SymbolsConsignes DE Prudence ET DE Sécurité Symboles Charger Connector not found on all models English / A-5Know Your Machine Control Panel English / A-7 Description of the Battery Condition IndicatorsInstall the Batteries When Servicing BatteriesInstall the Brushes Install the Squeegee Fill the Solution TankEnglish / A-9 To Purge Weekly To Purge When Changing Chemicals10 / English Detergent System Preparation and USEEnglish / A-11 To Scrub 12 / EnglishOperating the Machine WET VacuumingLubricating the Machine Maintenance ScheduleEnglish / A-13 After USETo Charge the Batteries Checking the Battery Electrolyte Level14 / English Charging the BatteriesSqueegee Maintenance Squeegee AdjustmentEnglish / A-15 To replace the scrub system side skirts Side Skirt MaintenanceSide Skirt Height Adjustment 16 / EnglishGeneral Machine Troubleshooting Problem Possible Cause RemedyEnglish / A-17 Model Adhancer R28-C Adhancer R32-C 18 / EnglishPage Español Español / B-3 Precauciones Y Advertencias SímbolosConozca SU Máquina Panel DE Control Español / B-5Cuando revise las baterías Descripción DE LOS Indicadores DE Situación DE LAS BateríasInstalación DE LAS Baterías Estándar AlternativoInstalación DE LOS Cepillos Español / B-7Llenado DEL Depósito DE Solución Instalación DE LA BoquillaReparación Y USO DEL Sistema DE Detergente Español / B-910 / Español Para fregar Español / B-11Manejo DE LA Máquina Aspiración EN HúmedoLubricación DE LA Máquina 12 / EspañolDespués DE LA Utilización Programa DE MantenimientoPara cargar las baterías Español / B-13Recarga DE Baterías Comprobación DEL Nivel DE Electrolitos DE LAS BateríasAjuste del ángulo de la boquilla 14 / EspañolMantenimiento DE LA Boquilla Ajuste DE LA BoquillaEspañol / B-15 Mantenimiento DE LA Faldilla LateralAjuste DE LA Altura DE LA Faldilla Lateral Véase el manual de servicio Solución DE Problemas Generales DE LA MáquinaProblema Posible causa Solución 16 / EspañolAdhancer R28-C Adhancer R32-C Español / B-172007

56316025 (R32-C), 56316026 (R32-C) specifications

Nilfisk-Advance America has continued to push the boundaries of cleaning technology with the introduction of the R32-C series, specifically models 56316026 and 56316025. These commercial-grade scrubbers are engineered for efficiency and effectiveness in a variety of settings, from retail environments to large industrial spaces.

One of the standout features of the R32-C models is their robust cleaning performance, powered by advanced brush technologies. The machines are equipped with dual counter-rotating brushes that provide a thorough scrub, ensuring that even the most stubborn dirt and grime is effectively removed. This brush system is designed to maintain consistent contact with the surface, enhancing cleaning efficiency and allowing operators to achieve superior results with minimal effort.

Another notable aspect of these scrubbers is the integrated solution delivery system. This technology allows for precise control over water and detergent dispensing, reducing waste and improving overall cleaning effectiveness. Operators can easily adjust the solution flow based on the specific cleaning task, making these machines adaptable to various floor types and conditions.

User convenience is also a primary focus in the design of R32-C models. The intuitive control panel simplifies operation, allowing staff to quickly learn how to use the equipment without extensive training. Additionally, the ergonomic design of the machine ensures comfortable handling, even during prolonged cleaning sessions, which is crucial for maintaining productivity in high-traffic environments.

Durability is another hallmark of the Nilfisk-Advance R32-C series. Constructed with high-quality materials, these scrubbers are built to withstand the rigors of daily use. Their robust chassis and components contribute to lower maintenance costs and longer service life, a critical factor for businesses looking to make a wise investment in cleaning equipment.

In summary, Nilfisk-Advance America's R32-C scrubbers 56316026 and 56316025 represent a significant advancement in cleaning technology. With their powerful cleaning capabilities, user-friendly operation, and durable construction, these models are designed to deliver exceptional performance for a wide range of commercial cleaning tasks. They not only enhance cleaning efficiency but also contribute to a healthier and safer environment for staff and customers alike.
Top Page Image Contents