Weed Eater BC3150, 530165748-01 instruction manual Troubleshooting Table Cause Remedy

Page 14

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

 

 

 

 

 

Engine will not

1.ON/OFF switch in

1.

Move ON/OFF switch to the ON

 

start.

 

OFF position.

 

position.

 

 

2.

Engine flooded.

2.

See “Starting a Flooded Engine” in

 

 

3.

Fuel tank empty.

 

Operation Section.

 

 

3.

Fill tank with correct fuel mixture.

 

 

4.

Spark plug not firing.

4.

Install new spark plug.

 

 

5.

Fuel not reaching

5.

Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

6.

Carburetor requires

 

repair or replace.

 

 

6.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

 

 

 

 

 

Engine will

1. Carburetor requires

1.

See “Carburetor Adjustment” in

 

not idle

 

adjustment.

 

Service and Adjustments Section.

 

properly.

2. Crankshaft seals worn.

2.

Contact an authorized service dealer.

 

 

3.

Compression low.

3.

Contact an authorized service dealer.

 

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

 

accelerate,

2. Spark plug fouled.

2.

Clean or replace plug

 

lacks power,

3. Carburetor requires

 

and regap.

 

or dies under

3.

Contact an authorized service dealer.

 

a load.

4.

adjustment.

4.

Contact an authorized service dealer.

 

 

Carbon build-up on

 

 

 

muffler outlet screen.

 

 

 

 

5.

Compression low.

5.

Contact an authorized service dealer.

 

Engine

1. Choke partially on.

1.

Adjust choke.

 

smokes

2. Fuel mixture incorrect.

2.

Empty fuel tank and refill with

 

excessively.

 

 

 

correct fuel mixture.

 

 

3.

Air filter dirty.

3.

Clean or replace air filter.

 

 

4.

Carburetor requires

4.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

Engine runs

1. Fuel mixture incorrect.

1.

See “Fueling Engine” in Operation

 

hot.

 

 

 

section.

 

 

2. Spark plug incorrect.

2.

Replace with correct spark plug.

 

 

3. Carburetor requires

3.

Contact an authorized service dealer.

 

 

 

adjustment.

4.

Contact an authorized service dealer.

 

 

4. Carbon build-up on

 

 

 

muffler outlet screen.

 

 

14

Image 14
Contents Manual de Instrucciones Manuel d’Instructions 11/19/04Hazard Zone Safety RulesOperator Safety Leg protectionCutting Safety UNIT/MAINTENANCE SafetyFuel Safety Transporting and StorageAssembly Attaching the Plastic Shield and Trimmer Head Configuring Your UnitAssembly Information Trimmer Head Attaching the Metal Shield Assembly Information Weed BladeInstallation of the Metal Blade Washer Cupped NutOperation Switch Throttle Trigger HOW to Stop Your UnitHOW to Start Your Unit See the Storage section for additional in- formationOperating Position Starting a Warm EngineStarting a Flooded Engine Operating Instructions for USE with Trimmer HeadCutting Methods Operating Instructions for USE with Weed BladeCheck for Loose Fasteners and Parts MaintenanceInspect and Clean Unit and DE- Cals Check for Damaged or Worn PartsService and Adjustments Engine Seasonal StorageFuel System OtherTroubleshooting Table Cause Remedy Ties As the small off--road engine engine Limited WarrantyLigations The U.S. Environmental Intermediate 125 hours Extended 300 hours

530165748-01, BC3150 specifications

The Weed Eater 530165748-01, BC3150 is an innovative and efficient string trimmer designed for both residential and professional landscaping needs. Known for its reliable performance, the BC3150 embodies a blend of power, versatility, and user-friendly design.

One of the standout features of the BC3150 is its powerful 31cc two-stroke engine. This engine provides robust cutting capability, making it suitable for a variety of tasks including trimming, edging, and clearing overgrown areas. The high-performance engine ensures that users can tackle tough weeds and grass with ease, providing a clean and professional finish in less time.

The BC3150 comes equipped with a dual-line bump feed head, which allows users to quickly advance new line simply by tapping the head on the ground. This feature saves time and effort, allowing for uninterrupted work and enhanced productivity. The dual-line system also provides improved cutting efficiency, ensuring that users can maintain well-manicured lawns and gardens.

Weed Eater has incorporated advanced technology into the design of the BC3150 for added convenience and comfort. The trimmer features an ergonomic handle that reduces fatigue during prolonged use. Additionally, the adjustable harness distributes weight evenly, providing greater balance and control, which is essential for large-scale landscaping projects.

One of the notable characteristics of the Weed Eater BC3150 is its lightweight construction. Weighing in at just under 10 pounds, this string trimmer is easy to maneuver and transport. This makes it an ideal choice for both novice and experienced users who require a reliable tool without the burden of excessive weight.

Durability is another key aspect of the BC3150’s design. Constructed with high-quality materials, the trimmer is built to withstand rigorous use over time. Its robust build ensures that it can handle various weather conditions and outdoor environments, making it a long-term investment for lawn care.

The Weed Eater BC3150 is versatile enough to accommodate various attachments, expanding its functionality. Users can easily switch between different heads for tasks such as edging or brush cutting, further enhancing its utility.

Overall, the Weed Eater 530165748-01, BC3150 is a powerful, efficient, and user-friendly string trimmer that meets the demands of any landscaping job. With its combination of advanced features, durability, and lightweight design, it's an excellent choice for anyone looking to maintain their outdoor spaces with ease.