Nilfisk-Advance America 56422001 English / A-13, Charging the Batteries, To Charge the Batteries

Page 13

ENGLISH / A-13

CHARGING THE BATTERIES

Charge the batteries each time the machine is used for 1 hour or longer, or whenever the Battery Condition Indicator Lights (B) light up red.

To Charge the Batteries...

1IMPORTANT!: Open the Battery Compartment Cover (13) to provide proper ventilation.

2Disconnect the Battery Connector Assembly (7) and plug the battery charger into the plug connected to the batteries.

4Follow the instructions on the battery charger.

5Check the fluid level in all battery cells after charging the batteries. Add distilled water, if necessary, to bring the fluid level up to the bottom of the filler tubes.

WARNING!

Do not fill the batteries before charging.

Charge batteries in a well-ventilated area.

Do not smoke while servicing the batteries.

When Servicing Batteries...

*Remove all jewelry

*Do not smoke

*Wear safety glasses, rubber gloves and a rubber apron

*Work in a well-ventilated area

*Do not allow tools to touch more than one battery terminal at a time

*ALWAYS disconnect the negative (ground) cable first when replacing batteries to prevent sparks.

*ALWAYS connect the negative cable last when installing batteries.

CAUTION!

To avoid damage to floor surfaces, wipe water and acid from the top of the batteries after charging.

CHECKING THE BATTERY WATER LEVEL

Check the water level of the batteries at least once a week.

After charging the batteries, remove the vent caps and check the water level in each battery cell. Use distilled or demineralized water in a battery filling dispenser (available at most auto parts stores) to fill each cell to the level indicator (or to 10 mm over the top of the separators). DO NOT over-fill the batteries!

CAUTION!

Acid can spill onto the floor if the batteries are overfilled.

Tighten the vent caps. Wash the tops of the batteries with a solution of baking soda and water (2 tablespoons of baking soda to 1 liter of water). Service Note: There is a drain plug in the bottom of the battery compartment.

FORM NO. 56041634 - Advolution™ 2710 / UHR 70-1700 - A-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Advance Models 56422000 Advolution 2710 UHRWeee Symbol Information English / A-3 English Important Safety InstructionsEnglish / A-5 Importantes Consignes DE SecuriteKnow Your Machine English / A-7 Batteries When Servicing BatteriesEnglish / A-9 Installation of the Burnishing PAD10 / English Installation of the Dust Collection BAGBefore Each USE English / A-11Plan Your Floor Burnishing Operating the Machine12 / English Maintenance ScheduleAfter USE Lubricating the MachineEnglish / A-13 Checking the Battery Water LevelCharging the Batteries To Charge the Batteries14 / English General Machine TroubleshootingModel Advolution UHR English / A-15Español Español / B-3 Instrucciones Importantes DE SeguridadConozca SU Máquina Español / B-5 Cuando revise las baterías BateríasInstalación DEL Disco DE Pulido Español / B-7Instalación DE LA Bolsa DE Recogida DE Polvo Antes DE Cada Utilización Español / B-9Planifique EL Pulido DEL Suelo Manejo DE LA Máquina10 / Español Recarga DE Baterías Español / B-11Comprobación DEL Nivel DE Agua DE LAS Baterías Para cargar las baterías12 / Español Solución DE Problemas Generales DE LA MáquinaModelo Advolution UHR Español / B-13Type UHR Deklaracija EU o skladnosti Prehlásenie o súlade EÚ 2006

56422002, 56422001, 2710, 56422000, UHR 70-1700 specifications

The Nilfisk-Advance America UHR 70-1700 is a versatile and powerful cleaning machine specifically designed for various industrial and commercial applications. This high-performance unit is engineered to provide efficient and effective cleaning solutions, making it an essential tool for facilities where cleanliness and hygiene are paramount.

One of the standout features of the UHR 70-1700 is its robust suction power. Equipped with a high-efficiency motor, it offers superior suction capabilities that ensure thorough dirt and debris removal from a wide range of surfaces. Whether it's carpets, hard floors, or upholstery, this machine can adapt to meet diverse cleaning needs.

Another key technology incorporated into the UHR 70-1700 is the advanced filtration system. This system not only captures dirt and dust particles but also works to improve indoor air quality. The inclusion of HEPA filters helps trap allergens and finer particles, ensuring cleaner air is circulated throughout the environment, which is particularly beneficial for sensitive conditions.

The machine boasts an ergonomic design that enhances usability and operator comfort. With easy-to-reach controls, adjustable handles, and a lightweight body, the UHR 70-1700 can easily be maneuvered in tight spaces or around obstacles, making it suitable for various settings, from schools to hospitals and commercial offices.

Durability is another hallmark of the UHR 70-1700. Constructed with high-quality materials, this unit is built to withstand the rigors of continuous use in demanding environments. Its components are designed to reduce wear and tear, thereby extending the equipment's lifespan and ensuring long-term value for businesses.

The UHR 70-1700 offers flexible cleaning options with various attachments and accessories, allowing operators to customize their cleaning approach. From specialized brush heads for delicate surfaces to high-pressure nozzles for tough grime, the machine is adaptable to meet specific cleaning challenges.

Overall, the Nilfisk-Advance America UHR 70-1700 presents an exceptional blend of power, efficiency, and versatility. With its advanced technologies, user-friendly design, and robust construction, it stands out as a top choice for professionals seeking a reliable cleaning solution in a variety of settings. Whether for routine maintenance or deep cleaning tasks, this machine delivers quality performance time and time again.
Top Page Image Contents