Nilfisk-Advance America 5 manual Description, Unloader valve, Purpose

Page 5

POSEIDON 5

english

pressure cleaner must be sub-

 

jected to a safety examination

 

in accordance with the „Acci-

 

dent

Prevention

Regulations

 

for Working with Liquid Spray

 

Jet Devices“ as required, but at

 

least every 12 months, by an au-

 

thorised inspector.

 

 

After all repairs or modifica-

 

tions

to electrical

equipment,

 

the protective conductor resist-

 

ance,

the insulation resistance

 

and the leakage current must

 

be measured. Furthermore, a

 

visual inspection of the mains

 

power lead, a voltage and cur-

 

rent measurement and a func-

 

tion test must be carried out. Our

 

after-sales service

technicians

are at your disposal as author- ised inspectors.

The complete „Accident Preven- tion Regulations for Working with Liquid Spray Jet Devices“ are available from the Carl Hey- manns Verlag KG, Luxemburger Strasse 449, 50939 Cologne or from the appropriate associa- tion of employers’ liability insur- ances.

Unloader valve

Unacceptably high pressure is fed back without residual pres- sure via a bypass line into the intake line of the pump when the safety device is tripped.

The unloader valve is set and sealed at the factory and must not be adjusted.

2 Description

2.1 Purpose

This high-pressure cleaner has

 

been designed for professional

 

use in

 

Agriculture

 

industry

 

transport industry

 

automotive cleaning

 

municipal facilities

 

cleaning trade

 

construction industry

 

food industry

 

etc.

Chapter 5 describes the use of the high-pressure cleaner for various cleaning jobs.

Always use the cleaner as de- scribed in these operating in- structions. Any other use may damage the cleaner or the sur- face to be cleaned or may result in severe injury to persons.

2.2Operating elements See fold-out page at front of these 10 Pressure regulation

operating instructions.

11

Detergent metering knob

 

 

12

Main switch

1

Handle

13

Pressure regulation on spray

2

Hose reel

 

lance

3

Mains power lead

14

Spray lance

4

Tank filler for detergent

15

Receptacle for Spray lance

5

Pressure gauge

16

Spray gun

6

Detergent tank

17

Detergent intake hose

7

High pressure hose

18

Receptacle for electrical lead

 

connection

 

 

8Supply water connection with water inlet filter

9 Check pump oil level

4

1) Options / model variants

Image 5 Contents
POSEIDONG45 Contents English Symbols used to mark instructions Important safety instructionsFor your own safety TransportTesting Maintenance and repairOperation Electrical equipmentPurpose DescriptionUnloader valve Setting up the cleaner Before starting the cleanerFill up detergent tank1 Machines with high pressure hose reelUse Connecting the water supplyElectrical connection Connections Control / OperationTornado Lance Pressure regulationHigh pressure = clockwise + Low pressure = anticlockwise High pressure = MAX Low pressure = MIN.CHEMApplications and methods Vehicle Task Accessories Method Task Accessories Method After using the cleanerSwitching off the cleaner Disconnecting supply lines Buildings and EquipmentMaintenance Changing the pump oil Maintenance work 7.2.1 Cleaning water inlet FilterChecking the pump oil level Fault Cause Remedy English 8 TroubleshootingFurther information Recycling the cleanerGuarantee EU Declaration of Conformity Poseidon Technical DataPoseidon 5 XT