|
|
|
| POSEIDON 5 |
5.2.3 Buildings and Equipment |
|
| english | |
|
|
|
|
|
Task | Accessories |
| Method |
|
|
|
|
|
|
General surfaces | Foam injectors | 1. | Apply thick foam over the surfaces to be cleaned. |
|
| Standard lance |
| Apply on dry surfaces. Apply from top to bottom |
|
Metallic equipment | Curved lances |
| on vertical surfaces. Let the foam act for up to 30 |
|
| Tank cleaning |
| minutes for the optimal effect. |
|
| head | 2. | Proceed with cleaning using the high pressure |
|
| Detergents |
| lance. Use applicable accessories. Use high |
|
|
| pressure to dislodge large amounts of incrusted dirt |
| |
| Intensive |
| or grime. Use lower pressure and high water volume |
|
| J25 Multi |
| in order to rapidly flush away loose dirt and rinse |
|
| Combi Aktive |
| surfaces. |
|
| Alkafoam | 3. | Apply DES 3000 disinfectant once the surfaces are |
|
| Disinfectant |
| perfectly clean. |
|
|
|
|
| |
| DES 3000 | Areas covered by amounts of loose dirt, such as |
| |
|
| animal remains in slaughterhouses, can be removed |
| |
|
| by using high water flow to flush away the dirt to |
| |
|
| evacuation pits or drains. |
| |
|
| Tank cleaning heads can be used to clean barrels, |
| |
|
| vats, mixing tanks etc. Cleaning heads may be |
| |
|
| hydraulically or electrically powered and give the |
| |
|
| possibility for automatic cleaning without a constant |
| |
|
| user. |
| |
|
|
|
|
|
Rusted or | Wet Sandblasting | 1. | Connect the sandblasting lance to the pressure |
|
damages surfaces | equipment |
| washer and place the suction tube in the sand. |
|
prior to treatment |
| 2. | Always wear protective equipment during |
|
|
|
| sandblasting. |
|
|
| 3. Spray the surfaces to be treated with the mix of |
| |
|
|
| water and sand. Rust, paint etc will be stripped off. |
|
|
|
|
|
|
These are merely several examples of cleaning tasks that can be solved by a pressure washer in asso- ciation with accessories and detergents. Each cleaning task is different. Please consult your local dealer or Gerni representative in order to discuss the best solution for your own cleaning tasks.
6 After using the cleaner
6.1Switching off the cleaner
6.2Disconnecting supply lines
O |
1.Turn the main switch to posi- tion „OFF“.
2.Close water tap.
3.Squeeze the spray gun han- dle until the cleaner is de- pressurised.
4.Lock the safety catch on the spray gun.
1.Remove the water hose from the cleaner.
2.Pull out the plug from the electrical socket.
1) Options / model variants | 11 |