Industry Automation and Drive Technologies - SCE
5.3Assigning a Device Name
17.First, highlight the module RF180C and then select, under the menu "Destination system“ and under Ethernet Assign device name.
Note
A prerequisite for this is that the die PG/PC interface is set to TCP/IP and the PC’s network card is configured correctly. For example, IP address 192.168.0.99, subnet 255.255.255.0 and router address
18.Highlight the SIMATIC RFID module and then click on the button “Assign name“. Then close the window.
TIA Training Document | Page 20 of 65 |
Module E11 |
|
Status: 01/2010 | Radio Frequency Identification (RFID) with SIMATIC |
RF180C |
|