Siemens DP, S7-300F-2 PN manual Switching the reader aerial on/off, Transponder Status

Industry Automation and Drive Technologies - SCE

pause with the MDS¹

remains set

Switching the reader aerial on/off

Command		Sub_command		length	address_MDS	DAT_DB	Comment
(hex)				[dec]	[hex]	[dec]
0A	01	= switch on aerial	-		-	-	The command Aerial
	02	= standby:					on/off can not be started
	Switch aerial off						with command repetition
							(refer to chapter
							"Command Repetition)
	09	= adjust aerial to					Only Reader 80 (MOBY
	the environment (FFT)						F)

Transponder Status

Command	Sub_command	length	address_MDS [hex]	DAT_DB [dec]	Comment
(hex)		[dec]
0B	00 = status and	-	Today’ s date	Pointer to	only MOBY U
	diagnosis		(week/year) to	result. The	(refer to
			calculate the life of	result is	chapter "The
			the battery (for	represented	UDTs of
			example, 1401 hex	with UDT 100	FB45“ )
			= 20th week of year
			2001)
	01 = type and write	-	-	Pointer to	RF 300
	protection status			result. The	(refer to
				result is	chapter "The
				represented	UDTs of
				with UDT 260	FB45“ )
	02 = diagnosis data	-	-	Pointer to	RF 300
				result. The	(refer to
				result is	chapter "The
				represented	UDTs of
				with UDT 270	FB45” )

(In our example, we are using the German language UDT261 and UDT271 for RF300)

Notes

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

TIA Training Document	Page 38 of 65
Module E11
Status: 01/2010	Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and
RF180C