Makita EM4341, EM4340L Safety Instructions, General Instructions, Intended use of the machine

Page 3

SAFETY INSTRUCTIONS

General Instructions

To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the Brush Cutter/Grass trimmer. Users insufficiently informed will risk danger to themselves as well as others due to improper handling.

It is recommended only to lend the Brush Cutter/Grass trimmer to people who have proven to be experienced with Brush Cutter/Grass trimmers.

Always hand over the instruction manual.

First users should ask the dealer for basic instructions to familiarize oneself with the handling of an engine powered cutter.

Children and young persons aged under 18 years must not be allowed to operate the Brush Cutter/Grass trimmer. Persons over the age of 16 years may however use the device for the purpose of being trained only whilst under supervision of a qualified trainer.

Use Brush Cutter/Grass trimmers with the utmost care and attention.

Operate the Brush Cutter/Grass trimmer only if you are in good physical condition. Perform all work calmly and carefully. The user has to accept liability for others.

Never use the Brush Cutter/Grass trimmer after consumption of alcohol or drugs, or if feeling tired or ill.

Intended use of the machine

The Brush Cutter/Grass trimmer is only intended for cutter grass, weeds, Bushes, undergrowth it should not be used for any other purpose such as Edging or hedge cutting as this may cause injury.

Personal protective equipment

The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not cause hindrance. Do not wear either jewelry or clothing which could become entangled with bushes or shrubs.

In order to avoid either head-, eye-, hand-or foot injuries as well as to protect your hearing the following protective equipment and protective clothing must be used during operation of the Brush Cutter/Grass trimmer.

Always wear a helmet where there is a risk of falling objects. The protective helmet (1) is to be checked at regular intervals for damage and is to be replaced at the latest after 5 years. Use only approved protective helmets.

The visor (2) of the helmet (or alternatively goggles) protects the face from flying debris and stones. During operation of the Brush Cutter/Grass trimmer always wear goggles, or a visor to prevent eye injuries.

Wear adequate noise protection equipment to avoid hearing impairment (ear muffs (3), ear plugs etc.).

The work overalls (4) protect against flying stones and debris. We strongly recommend that the user wears work overalls.

Special gloves (5) made of thick leather are part of the prescribed equipment and must always be worn during operation of the Brush Cutter/Grass trimmer.

When using the Brush Cutter/Grass trimmer, always wear sturdy shoes (6) with a non-slip sole. This protects against injuries and ensures a good footing.

Starting up the brush cutter

Please make sure that there are no children or other people within a working range of 15 meters (50ft), also pay attention to any animals in the working vicinity.

Before use always check that the Brush Cutter/Grass trimmer is safe for operation:

Check the security of the cutting tool, the control lever for easy action and check for proper functioning of the control lever lock.

Rotation of the cutting tool during idling speed is not allowed. Check with your dealer for adjustment if in doubt. Check for clean and dry handles and test the function of the start/stop switch.

(1)

(2)

(3)

(4)

(5)(6)

Diagrammatic figure

2

Image 3
Contents EM4340 EM4340L EM4341 Symbols ON/STARTOFF/STOP Personal protective equipment Safety InstructionsGeneral Instructions Intended use of the machineMeters RefuellingCutting Tools Maintenance instructionsMethod of operation KickbackPackaging When asking for help, please give the following informationNever straighten or weld damaged cutting tools First AidTechnical Data Walbro WYJNGK CMR6A Designation of Parts Designation of PartsMounting of Handle for EM4340L Assembly of Engine and Shaft for EM4340, EM4341 Mounting of Handle for EM4340, EM4341For EM4340 Lay out the control cable as indicated in the figure For EM4341Connection of Switch Cord Adjustment of Control CableMounting of Control Cable For EM4340, EM4340L Mounting of ProtectorMounting of Cutter Blade or Nylon Cutting Head Mounting of cutter bladeMounting of nylon cutting head Inspection and Refill of Engine Oil Point 1 in Replacement of Oil Oil GaugePoint 2 in Replacement of Oil If oil spills out Before Start of OperationFuel RefuelingHandling of Fuel Storage Period of FuelPoints in Operation and HOW to Stop Correct Handling of MachineStarting Stopping OpenStop Operation of Throttle Lever Adjustment of LOW-SPEED Rotation IdlingAdjustment of Engine Rotation Resharpening the Cutting ToolPage Replacement of Engine OIL Daily checkup and maintenanceServicing Instructions Points on OIL Supply of Grease to Gear Case Cleaning of AIR CleanerPoints in Handling Air Cleaner Element Checking the Spark PlugReplacement of Gaskets and Packings Cleaning of Fuel FilterReplacement of Fuel Pipe Cleaning of PartsStorage Fault locationOperating time Before After Daily Shutdown Corres Troubleshooting 11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502, Japan