Makita EH 450 Dimensions L x W x H, 063x 288 x, Cutting length, Clutch engagement speed Llmin

Page 6

First aid

In case of an accident make sure that a well-stocked first-aid kit- according to DIN 13164, is available in the vicinitv of the cuttina I operations.

Immediately replace any item taken from the first aid kit.

Packaging

The MAKITA Hedge Trimmer is delivered in a protective cardboard box to prevent shipping damage. Cardboard is.a basic raw material and is therefore consequently reusable or suitable for recycling (waste paper recycling).

SPECIFICATION

M o d e l		EH450		EH620
Dimensions (L x W x H)	mm	964 x 244 x 218		1,063x 288 x 218
Mass (with blade cover)	kg	4.4		4.5
Volume (fuel tank)	cm3			0.4
Engine displacement	cm3			20.0
Cutting length	mm	450		620
Maximum engine performance	kw			0.61
Maximum blade speed	mls			1.8
Idling speed	llmin			3,000
				~
Clutch engagement speed	llmin			4,000
Carburetor type	type		WALBRO WYL
Ignition system	type		Solid ignition system
Spark plug	type			NGK BM4A
			I	.
Electrode gap	mm			0.3 - 0.7
Mixture ratio (fuel : MAKITA 2-stroke oil)				50 : 1
Gear ratio				8 : 34

1)The data takes equally into account idling and racing speed operating modes.

,'-

6

Image 6

Contents Hedge Trimmer Keep the Area of Operation Precautions before startingRead, Understand and Follow Clear of All Persons and Pets Wear Eye and Ear ProtectionIntended use of the machine Do Not abuse the TrimmerPersonal protective equipment Tool Replacement Clean protective clothing at regular intervalsMaintenance Only use outdoorsMaintenance instructions Damage caused by the use of any non-approved accessoriesMethod of operation Cutting length Dimensions L x W x H063x 288 x Clutch engagement speed LlminName of Major Parts Blade Throttle lever Front handle Rear handle Recoil starterFuelsirefuelling Fuel and oil mirtureHandling petroleum products Refuelling Precautions Before StartingDiagrammatic-figure Storage of fuelMove the choke lever 3to position1-1 Starting the MachineStopping the Machine Cutting blade into an obstruction or your bodyOperation of the Machine CaseBlade sharpening Maintenance InstructionsBlade adjustment For aSupply of grease and lubricant Checking and adjusting the idling speedChecking the spark plug Every 8 hours Daily Grease will come out from hereDaily checkup and maintenance Required by the carburetorMaintenance Schedule Fault LocationStorage MANUFACTURER’SWARRANTY Coverage OWNER’S Warranty ResponsibilitiesWhat is Covered Under this Warranty Limited WarrantyWarranty Period EMISSION-RELATED Parts Covered Under this WarrantyWhat is not Covered Under this Warranty Maintenance Schedule Procedure IntervalRepair and Replacement of EMISSION-RELATED Parts HOW to File a Warranty Claim Where to GET Warranty ServicesFederal Emission Component Defect Warranty Emission Component Defect Warranty PeriodOWNER’S Warranty RESPONSIBILIT1 ES HOW to Make a Claim M O 11-8,Sumiyoshi-cho, Anjo, Aichi 446-8502,Japan