Method of operation
- Use the Hedge Trimmer only in good light and visibility. During cold seasons beware of slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe footing.
- Do not overreach or stand on unstable support. Keep good footing and balance at all times.
- Keep both feet on the ground.
- Never stand on a ladder and the Hedge Trimmer.
- Never climb up into trees to perform cutting operation with the Hedge Trimmer.
-
Off.
-KEEP HANDS AND ALL PARTS OF BODY AWAY from blade. The edges are sharp and can cause injury even when the tool is “OFF
-BEFORE TRIMMING, inspect areas for wires, cords, glass or other foreign objects which could come in contact with the blade.
-Keep both hands on the handles when operating a Hedge Trimmer, Never grasp exposed cutting blades of Hedge Trimmer.
-Make sure engine is stopped and blades have stopped moving before clearing jammed material.
-Be aware of any and all electric lines and electric fences. Check all areas for electrical lines before cutting.
-To reduce the risk of stumbling and loss of control, do not walk backward while operating the machine.
Maintenance instructions
- Always stop the engine before cleaning or servicing the unit or replacing parts.
- MAINTAIN TOOL WITH CARE. Keep cutting edges sharp and clean for best and safest performance. Follow instructions for lubricating and proper maintenance.
- Be kind to the environment. Operate the Hedge Trimmer with as little noise and pollution as possible. In particular check the correct adjustment of the carburetor.
- Clean the Hedge Trimmer at regular intervals and check that all screws and nuts are securely tightened.
- Never service or store the Hedge Trimmer in the vicinity of open flames, sparks, etc. (11).
- Always store the Hedge Trimmer in a
Observe and follow all relevant accident prevention instructions issued by the trade associations safety boad and by insurance companies. Do not perform any modific;rtions to the Hedge Trimmer as this will risk your safety.
The performance of maintenance or repair work by the user is limited | to those activities as described in this instruction manual. All other work is |
to be done by Makita authorized or Factory Service Centers. |
|
Use only genuine spare parts and accessories supplied by MAKITA authorized or factory service centers. | |
Use of | accidents and injuries. MAKITA will not accept any liability for accidents or |
damage caused by the use of any |
|