Makita EH 620 manual Precautions Before Starting, Refuelling, Storage of fuel, Diagrammatic-figure

Page 9

Refuelling

Always stop the engine and allow it to cool before refuelling.

- Thoroughly clean the around the fuel filler cap to prevent dirt from getting into the fuel tank.

- Unscrew the fuel filler cap and fill the tank with fuel. - Tightly screw on the fuel filler cap.

- Clean the fuel filler cap and tank after refuelling! Wipe up any fuel

Storage of fuel

-Fuel cannot be stored for an unlimited period of time.

-Purchase only the quantity required for a 4 week operation period.

-Use approved fuel storage containers only.

WARNING!

Gasoline is an extremely flammable fuel. Use extreme caution when handling gasoline or fuel mix. Do not smoke or bring any fire or flame near the fuel.

II

PRECAUTIONS BEFORE STARTING

-Please make sure that there are no children or other people within a working range of 15 meters or 50 feet, also pay attention to any animals in the working vicinity.

-Before use always check that the Hedge Trimmer is safe for operation. Check the cutting device is not damaged, the control lever for easy action and check for proper function of the STOP switch.

Rotation of the cutting device during idling speed is not allowed. Check with your dealer for adjustment if in doubt. Check for clean and dry handles and test function of the STOP switch.

-Start the Hedge Trimmer only in accordance with the instructions. Do not use any other methods for starting the engine. (See Starting)

-Start the hedge Trimmer engine'only after the entire assembly is done. Operation of the engine is only permitted after all the appropriate accessories are attached. Otherwise there is a risk of injury.

-Before starting, make sure that the cutting device has no contact with objects such as branches, stones, etc.

-Before trimming, inspect area for wires, cords, glass, or other foreigh objects which could come in contact with the blade.

Electrical shock. Be aware of any and all electric lines and electric fences. Check all areas for electrical lines before cutting.

Diagrammatic-figure

,' 360"

:

I 15 meters I

(50feet)

Q -I

- - _ _ _ - -

&%-e

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hedge Trimmer Read, Understand and Follow Precautions before startingKeep the Area of Operation Clear of All Persons and Pets Wear Eye and Ear ProtectionIntended use of the machine Do Not abuse the TrimmerPersonal protective equipment Maintenance Clean protective clothing at regular intervalsTool Replacement Only use outdoorsMaintenance instructions Damage caused by the use of any non-approved accessoriesMethod of operation 063x 288 x Dimensions L x W x HCutting length Clutch engagement speed LlminBlade Throttle lever Front handle Rear handle Recoil starter Name of Major PartsFuelsirefuelling Fuel and oil mirtureHandling petroleum products Diagrammatic-figure Precautions Before StartingRefuelling Storage of fuelStopping the Machine Starting the MachineMove the choke lever 3to position1-1 Cutting blade into an obstruction or your bodyCase Operation of the MachineBlade adjustment Maintenance InstructionsBlade sharpening For aChecking the spark plug Every 8 hours Daily Checking and adjusting the idling speedSupply of grease and lubricant Grease will come out from hereRequired by the carburetor Daily checkup and maintenanceMaintenance Schedule Fault LocationStorage OWNER’S Warranty Responsibilities MANUFACTURER’SWARRANTY CoverageWarranty Period Limited WarrantyWhat is Covered Under this Warranty EMISSION-RELATED Parts Covered Under this WarrantyMaintenance Schedule Procedure Interval What is not Covered Under this WarrantyHOW to File a Warranty Claim Where to GET Warranty Services Repair and Replacement of EMISSION-RELATED PartsEmission Component Defect Warranty Period Federal Emission Component Defect WarrantyOWNER’S Warranty RESPONSIBILIT1 ES HOW to Make a Claim M O 11-8,Sumiyoshi-cho, Anjo, Aichi 446-8502,Japan
Top Page Image Contents