Makita EH 450 Only use outdoors, Gas. Always ensure there is adequate ventilation, Condition

Page 4

-Please make sure that there are children or other people within a working range of 50 feet or 15meters (5),also pay attention to any animals in the working vicinity

-Before operating, always check that the Hedge Trimmer is safe for operation:

Check the security of the throttle lever. The throttle lever should be checked for smooth and easy action. Check for proper functioning of the throttle lever lock. Check for clean and dry handles and test

ofthe STOP switch. Keep handles free of oil and fuel.Starting up the Hedge Trimmerthe function

Start the Hedge Trimmer only in accordance with the instructions.

-Donot use any other methods for starting the engine (6)l

-Start the Hedge Trimmer enjine only after the entire assembly is done. Operation of the Hedge Trimmer is permitted only after all

-the appropriate accessories are attached!

Before starting, make sure that the cutter blade will not contact

-any objects such as branches, stones, elc.

The engine is to be stopped immediately if there are any engine

-problems.

When working with the Hedge Trimmer, keep both hands on handles always wrap your fingers tightly around the handle, keeping the control handle cradled between your thumb and forefinger, Keep your hand in this position to have your machine under control at all times. Make sure your control handle is in good condition and free of moisture, pitch, oil or grease.

-Always ensure a safe, well-balanced footing

-Only use outdoors.

Operate the Hedge Trimmer in such a manner as to avoid inhalation of the exhaust gases. Never run the engine in enclosed rooms (risk of suffocation and gas poisoning). Carbon monoxide is an odorless

-gas. Always ensure there is adequate ventilation.

Stop the engine when resting and when leaving the Hedge Trimmer unattended. Place it in a safe location to prevent danger to others, setting fire to combustible materials or damage to the machine.

-Never lay down the hot Hedge Trimmer onto dry grass or onto any

-combustible materials.

Never operate the engine with a faulty exhaust muffler.

-Stop the engine during transport (7).

-Secure the tool properly before transporting in vehicle to avoid fuel

-leakage.

When transporting the Hedge Trimmer ensure that the fuel tank is completely empty to avoid fuel leakage.Use the Hedge Trimmer only for applications specified.

-To reduce the risk of fire and bum injury; handle fuel with care. It

-is highly flammable.

Stop the engine before refuelling (7), keep well away from open

-flame (8)and do not smoke.

Do not attempt to refuel a hot or a running engine.

-Avoid skin contact with petroleum products. Do not inhale fuel vapor. Always wear protective gloves during refuelling. Change

-and clean protective clothing at regular intervals.

Take care not to spill either fuel or oil always wipe unit dry before starting engine. Allow wet cloths to dry before disposing in proper, covered container to prevent spontaneous combustion.

-Avoid any fuel contact with your clothing. Change your clothing immediately if fuel has been spilled on it (danger hazard).

-Inspect the fuel cap at regular intervals making sure that it stays securely fastened.

-Carefully tighten the locking screw of the fuel tank. Move at lease 10ft (3meters) away from the refuelling point before starting engine.

-Never refuel in closed rooms. Fuel vapors accumulate at ground level (risk of explosions).Refuelling

- Only transport and store fuel in approved containers. Make sure

stored fuel is not accessible to children. -

- When mixing gasoline with two-cycle engine oil, use only gasoline which contains no ethanol or methanol (types of alcohol).

This will help to prevent damage to fuel lines and other engine parts. - Make sure the unit is properly assembled and in good operating

condition.

, '-

I - - _ _ _ - -

0

wI ' I I

' STOP

Resting

Transporting

Refuelling

Maintenance

Tool Replacement

(7)

n-1\

4

Image 4
Contents Hedge Trimmer Precautions before starting Read, Understand and FollowKeep the Area of Operation Clear of All Persons and Pets Wear Eye and Ear ProtectionDo Not abuse the Trimmer Intended use of the machinePersonal protective equipment Clean protective clothing at regular intervals MaintenanceTool Replacement Only use outdoorsDamage caused by the use of any non-approved accessories Maintenance instructionsMethod of operation Dimensions L x W x H 063x 288 xCutting length Clutch engagement speed LlminName of Major Parts Blade Throttle lever Front handle Rear handle Recoil starterFuel and oil mirture FuelsirefuellingHandling petroleum products Precautions Before Starting Diagrammatic-figureRefuelling Storage of fuelStarting the Machine Stopping the MachineMove the choke lever 3to position1-1 Cutting blade into an obstruction or your bodyOperation of the Machine CaseMaintenance Instructions Blade adjustmentBlade sharpening For aChecking and adjusting the idling speed Checking the spark plug Every 8 hours DailySupply of grease and lubricant Grease will come out from hereDaily checkup and maintenance Required by the carburetorFault Location Maintenance ScheduleStorage MANUFACTURER’SWARRANTY Coverage OWNER’S Warranty ResponsibilitiesLimited Warranty Warranty PeriodWhat is Covered Under this Warranty EMISSION-RELATED Parts Covered Under this WarrantyWhat is not Covered Under this Warranty Maintenance Schedule Procedure IntervalRepair and Replacement of EMISSION-RELATED Parts HOW to File a Warranty Claim Where to GET Warranty ServicesFederal Emission Component Defect Warranty Emission Component Defect Warranty PeriodOWNER’S Warranty RESPONSIBILIT1 ES HOW to Make a Claim M O 11-8,Sumiyoshi-cho, Anjo, Aichi 446-8502,Japan