Technical specifications
AMPLIFIER SECTION
RMS power output
THD 10%, |
|
both channels driven | 15 W per channel (6 Ω ) |
PMPO power output (For South East Asia only) 150 W
Output impedance |
|
Headphone |
FM TUNER SECTION
Frequency range | |
| (50 kHz step) |
Sensitivity | 2.0 µV (IHF) |
S/N 26 dB | 1.5 µV |
Antenna terminal(s) | 75Ω (unbalanced) |
AM TUNER SECTION
Frequency range | 522 – 1629 kHz (9 kHz steps) |
| 520 – 1630 kHz (10 kHz steps) |
Sensitivity |
|
S/N 20 dB (at 999 kHz) | 560 µV/m |
CASSETTE DECK SECTION
Track system | 4 track, 2 channel |
Heads |
|
Record/playback | Solid permalloy head |
Erasure | AC erase head |
Motor | DC servo motor |
Recording system | AC bias 100 kHz |
Erasing system | AC erase 100 kHz |
Tape speed | 4.8 cm/s |
Overall frequency response (+3, -6 dB) at DECK OUT
NORMAL (TYPE I) | 35 Hz – 14 kHz |
S/N | 50 dB (A weighted) |
Wow and flutter | 0.15% (WRMS) |
Fast forward and rewind times |
|
Approx. 120 seconds with
CD SECTION
Sampling frequency | 44.1 kHz |
Decoding | 16 bit linear |
Beam source | Semiconductor laser |
Wavelength | 780 nm |
Number of channels | 2 channels Stereo |
Wow and flutter | Below measurable limit |
Digital filter | 8 fs |
D/A converter | MASH (1 bit DAC) |
Pickup |
|
Bølgelengde | 780 nm |
Laserstyrke | Ingen farlig stråling sendes ut |
SPEAKER SECTION
Type | 2 way speaker system |
Speaker(s) |
|
Full range | 10 cm cone type |
Tweeter | 6 cm cone type |
Impedance | 6 Ω |
Input power | 30 W (Music) |
Output sound pressure level | 82 dB/W (1.0 m) |
Frequency range | 55 |
| 70 |
Dimensions (WxHxD) | 140 x 225 x 228 mm |
Mass | 1.95 kg |
GENERAL
Power supply
For Continental Europe | AC |
For United Kingdom, Australia and N.Z. | |
| AC |
For South East Asia | AC |
Power consumption | 48 W |
Dimensions (WxHxD) | 165 x 228 x 313 mm |
Mass | 3.9 kg |
Power consumption in standby mode 0.8 W
Note:
1.Specifications are subject to change without notice. Mass and dimensions are approximate.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
Reference
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•Never use alcohol, paint thinner or benzine to clean this unit.
•Before using chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and recording.
Use a cleaning tape (not included).
23 |
RQT6682 |
