A

R6, AA, UM-3

B

Remote control signal sensor

Transmission

window

About 7 meters in front of the signal sensor.

C

The remote control

ABattery installation

Use of batteries

• Align the poles (+ and –) properly when inserting the

 

batteries.

 

• Do not mix old and new batteries or different types of

use

batteries.

 

• Do not recharge ordinary dry cell batteries.

Before

• Remove the batteries if the unit is not to be used for a long

• Do not heat or disassemble the batteries. Do not allow

 

them to contact flame or water.

 

time.

 

• Do not keep together with metallic objects such as

 

necklaces.

 

• Do not use rechargeable type batteries.

 

• Do not use batteries if the covering has been peeled off.

 

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.

BCorrect method of use

Operations notes

Do not place obstacles between the remote control signal sensor and remote control unit.

Do not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light.

Take care to keep the remote control signal sensor and end of the remote control unit free from dust.

If this system is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control unit a shorter distance from the system.

To prevent damage

Do not place heavy items on the remote control.

Do not disassemble or reconstruct.

Do not spill water or other liquids on the remote control.

CPlacement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary.

Notes

Keep your speakers at least 10 mm away from the system for proper ventilation.

These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.

To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.

5

RQT6682

Page 5
Image 5
Panasonic SC-PM10 operating instructions Remote control, Placement of speakers, Battery installation, Correct method of use