Connections

Plug the AC mains lead into a household mains socket only after all other connections have been made.

To prepare the AM loop antenna wire and speaker cords,

twist the vinyl cover tip and pull off.

1

2

Before use

6

3 1

To household mains socket

1

For Europe

 

 

For Others

2

 

 

Adhesive

 

 

 

 

 

 

 

 

 

 

 

 

tape

 

 

 

 

 

 

FM indoor

 

 

3

 

 

 

 

 

 

 

 

 

antenna

 

 

 

 

 

 

1

2

 

 

 

 

 

 

 

 

2

For Europe

 

 

For Others

 

 

 

 

 

 

 

 

1

 

1

 

 

 

 

 

 

 

 

 

 

2

 

 

2

 

 

 

 

 

 

 

 

AM loop antenna

 

 

 

 

 

 

 

 

 

 

 

4

3

(SB-PM10)

Red (

)

 

 

 

 

1

 

 

Black (

)

 

 

 

 

 

 

 

 

 

 

3

 

2

Red tag Copper

 

 

 

 

 

 

L

 

 

(

)

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

Silver (

)

 

Black (

)

 

Red (

)

 

 

 

 

 

 

 

Connect the FM indoor antenna.

Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference.

Note

For the best reception:

An FM outdoor antenna is recommended. (\ page 7)

Connect the AM loop antenna.

After attaching the antenna, turn on the system and tune in a broadcast station. Put the antenna where the reception is best and interference is minimal.

Connect the speaker cables.

Connect the speaker cords without tags to the black terminals, so (+) and (–) are correct.

Connect the speaker cords with red tags to the red terminals, so (+) and (–) are correct.

Never allow the exposed wires to contact each other when connected.

Incorrect connection can damage the unit.

Caution

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Caution

Use the speakers only with the recommended system.

Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

Do not attach these speakers to walls or ceilings.

Connect the AC mains lead.

FOR THE UNITED KINGDOM ONLY

READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.

Insertion of Connector

Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing.

However there is no problem using the unit.

Appliance inlet

Connector

Approx. 3.5 mm

Note

The included AC mains lead is for use with this unit only. Do not use it with other equipment.

RQT6682

Page 6
Image 6
Panasonic SC-PM10 operating instructions Connections