xv System requirements

Command WorkStation (option)

To run the Command WorkStation application from a remote workstation, you need:

A Windows-based computer with a 200MHz Pentium processor

Windows 95/98/Me, Windows NT 4.0 with NT Service Pack 5, or Windows 2000

TCP/IP or IPX/SPX networking protocol installed

A video adapter card with at least 2MB of video memory

At least 32MB of RAM

An 850MB (or greater) hard disk drive

A 17" monitor that supports 16-bit color at a minimum resolution of 1024 x 768

DocBuilder Pro (option)

To run the Command WorkStation application with DocBuilder Pro (both available as options), you need:

A Windows-based computer with a 333MHz Pentium processor

Windows 95/98/Me, Windows NT 4.0 with NT Service Pack 5, or Windows 2000

TCP/IP networking protocol installed

A video adapter card with at least 2MB of video memory

64MB of RAM

An 850MB (or greater) hard disk drive

90MB of available hard disk space

A 17" monitor that supports 16-bit color at a minimum resolution of 1024 x 768

Page 17
Image 17
Toshiba e Studio45/35 manual Command WorkStation option, DocBuilder Pro option