55 Setting up the GA-1040 as a PostScript printer
Setting up the GA-1040 in the Chooser
After you install the Adobe PostScript printer driver and PPD file (see “Setting up the GA-1040 as a PostScript printer” on page 53), you need to set up the GA-1040 in the Chooser in order to take full advantage of its features. This section describes how to set up the GA-1040 with the AdobePS printer driver.
TO SET UP THE GA-1040IN THE CHOOSER
1.Select Chooser from the Apple menu.
Make sure AppleTalk is set to Active.
2.Select the correct AppleTalk Zone, if necessary.
3.Click the AdobePS icon.
The GA-1040 appears in the Select a PostScript Printer list in the form of <server name>_<device name>_<print connection>. The device name (GA-1040) is the internal name of your printer.
NOTE: Only the print connections (Direct, Hold, and Print) that have been enabled in Setup appear in the Chooser.
