Toshiba e Studio45/35 manual Completing the Windows NT 4.0 TCP/IP and LPR connection

23Setting up PostScript and/or PCL printing with Windows NT 4.0 and/or Windows 2000

3.Click the General tab and click Print Test Page.

When you select print, your files are transmitted over the parallel port connection to the GA-1040.

4.Click the Sharing tab if you want to share the GA-1040 with network users. Select Shared (Windows NT 4.0) or Share as (Windows 2000), and select a share name.

Select the operating system or systems used by your network clients if you want to install a printer driver that those clients can download.

5.Click OK to exit the Printer Properties dialog box.

Completing the Windows NT 4.0 TCP/IP and LPR connection

Once you have installed the PostScript printer driver and printer driver files, complete the setup for the TCP/IP and LPR connection as follows:

•Prepare the GA-1040 to accept print jobs using TCP/IP and LPR protocols. (See the Configuration Guide for details.)

•Configure the workstation for the TCP/IP connection.

Before you continue, ask the system administrator for the IP address assigned to the GA-1040, as well as the subnet mask and the gateway address, if they are used.

The TCP/IP Protocol and Microsoft TCP/IP Printing software should already be installed on the Windows NT 4.0 workstation.