Toshiba e Studio45/35 - page 20

2 Installing User Software on a Windows Computer
If you are printing using SMB (Server Message Block) you can connect to
the GA-1040 and install the printer drivers in a single procedure. To configure the
GA-1040 for SMB printing, see “Setting up SMB printing with Windows 95/98/Me”
on page 13.
If you are printing through a Novell server, see “To set up IPX (Novell) printing
with Windows 95/98/Me” on page 12.
T
O INSTALL THE
P
OST
S
CRIPT OR
PCL P
RINTER
D
RIVER FOR
W
INDOWS
95/98/M
E
1. Insert the User Software CD into the CD ROM drive and select the Installr folder.
The User Software CD automatically begins the installation process with Auto insert
notification enabled on Windows, which is the default setting. If the Welcome dialog
box does not appear automatically when inserting the CD, you can begin installation
by selecting the Installr folder from the CD and double-clicking the Setup.exe icon.
N
OTE
:
See your Windows documentation for more information about the Auto insert
notification.
2. Follow the on-screen instructions.
N
OTE
:
Using the PostScript driver requires either the HDD option or the PostScript
option installed on the copier.
T
O CONFIGURE INSTALLABLE OPTIONS ON THE
GA-1040
FROM THE POSTSCRIPT
AND/OR PCL PRINTER DRIVERS FOR WINDOWS 95/98/ME
NOTE:The procedures for configuring installable options are similar for the PostScript
and PCL6 printer drivers. For the purpose of the following instructions, the PostScript
printer driver is used in illustrations.
1. In the Printers window, select the Toshiba e-STUDIO 45 icon for the PostScript or PCL
printer driver.
Choose Properties from the File menu.
2. Select the Options tab.