Toshiba e Studio45/35 manual Completing the Windows 95/98/Me printer connection

5 Setting up PostScript and/or PCL printing with Windows 95/98/Me

Completing the Windows 95/98/Me printer connection

To print from Windows 95/98/Me you need to:

•Set up network servers, if any

•Set up the GA-1040 to accept print jobs from your computer

•Configure a port on each Windows computer for the network

To do this:	See:
Configure the parallel connection	“Completing the Windows 95/98/Me parallel
	port connection” below.
Configure the IPX (Novell) connection	“Completing the Windows 95/98/Me IPX/SPX
	or IPX (Novell) connection” on page 10.

Completing the Windows 95/98/Me parallel port connection

Preparing a parallel port connection for Windows 95/98/Me requires specific BIOS settings on your computer, and specific port and printer settings for

Windows 95/98/Me. In addition, a change to one of the GA-1040 Setup settings may be required if you choose to spool files to the GA-1040 rather than print directly.

TO PREPARE THE GA-1040AND YOUR COMPUTER FOR PARALLEL PORT PRINTING

1.Connect the GA-1040 to the parallel port on your computer.

For instructions, see the Configuration Guide.

2.In Network Setup>Port Setup>Parallel Port Setup, set Enable Parallel Port to Yes.

For more information about GA-1040 Setup, see the Configuration Guide.

3.If you want to spool files to the GA-1040, set Port Timeout in Seconds to 10. If you want to print directly to the GA-1040, set Port Timeout in Seconds to 5.

Setting this option to 10 seconds ensures that spooling is not interrupted due to timeout.