Toshiba e Studio45/35 manual To do this See

22 Installing User Software on a Windows Computer

Completing the Windows NT 4.0 and/or Windows 2000 printer connection

To print from Windows NT 4.0 you need to:

•Set up network servers, if any

•Set up the GA-1040 to accept print jobs from your computer

•Configure a port on each Windows NT computer for the network type

To do this:	See:
Configure the parallel connection	“To set up parallel printing for Windows NT 4.0
	and/or windows 2000” below.
Configure the TCP/IP (LPR port)	“Completing the Windows NT 4.0 TCP/IP and
connection	LPR connection” on page 23 or “Completing the
	Windows 2000 TCP/IP and LPR connection” on
	page 26
Configure the IPX (Novell)	“Completing the Windows NT 4.0 and/or
connection	Windows 2000 IPX (Novell) connection” on
	page 27.

Completing the Windows NT 4.0 and/or Windows 2000 parallel port connection

The parallel port cable connects the GA-1040 to a single computer. Once you have installed the Windows NT 4.0 or Windows 2000 printer driver and the GA-1040 PPD, complete the setup for parallel port printing.

TO SET UP PARALLEL PRINTING FOR WINDOWS NT 4.0 AND/OR WINDOWS 2000

1.Click the Start button, choose Settings, and then choose Printers.

2.Double-click the Toshiba e-STUDIO 45 icon and choose Properties from the Printer menu.

In the Ports tab, confirm that LPT1 (Local Port) is checked.

The GA-1040 is ready to accept parallel print jobs from your computer, using the Windows NT 4.0 or Windows 2000 PostScript printer driver and the GA-1040 PPD.