Craftsman 917.270751 owner manual To Start Engine, Warm Weather Starting 50 F and Above

Page 15

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

•Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

•Place gear shift lever in neutral (N) position.

•Move attachment clutch to "DISEN- GAGED" position.

•Move throttle control to fast position

•Pull choke control out for a cold engine start attempt. For a warm engine start

attempt the choke control may not be needed.

NOTE: Before starting, read the warm and cold starting procedures below.

•Insert key into ignition and turn key clockwise to "START" position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, push choke control in, wait a few minutes and try again. If engine still does not start, pull the choke control out and retry.

WARM WEATHER STARTING (50 ° F AND ABOVE)

•When engine starts, slowly push choke control in until the engine begins to run smoothly. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly.

•The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and

allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING (50 ° F AND BELOW)

•When engine starts, slowly push choke control in until the engine begins to run smoothly. Continue to push the choke control in small steps allowing the engine to accept small changes in speed and load, until the choke control is fully in. If the engine starts to run roughly, pull the choke control out slightly for a few seconds and then continue to push the control in slowly. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

•The attachments can be used during the engine warm-up period and may require the choke control be pulled out slightly.

NOTE; A high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be

adjusted for best engine performance. See "TO ADJUST CARBURETOR" in the

Service and Adjustments section of this manual.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents CRI Ftsmrni Limited 90 DAY Warranty on Battery Safety RulesChildren General OperationSlope Operation Do notService Customer Responsibilities Product SpecificationsFl l Before Removing Tractor from Skid Attach Steering Wheel HOW to SET UP Your TractorTools Required for Assembly Check BatteryTo Drive Tractor OFF Skid Install Mulcher PlateCheck for Proper Position of ALL Belts To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessJxl ,@ Lever Know Your TractorTo Move Forward and Backward HOW to USE Your Tractor to SET Parking BrakeStopping Throttle ControlTo Operate On Hills To Adjust Mower Cutting To Operate HeightTo Adjust Gauge Wheels AcautionBefore Starting the Engine ADD GasolineCheck Engine OIL Level To Start Engine Warm Weather Starting 50 F and AboveCold Weather Starting 50 F and below Mulching Mowing Tips Mowing TipsLubrication Chart General RecommendationsBefore Each USE Tractor Belts Clean AIR INTAKE/COOLING AreasClean AIR Screen EngineSpark Plugs AIR FilterEngine OIL Filter MufflerCleaning To Install MowerTo Remove Mower Belt Removal To Level Mower HousingTo Replace Motion Drive Belt Belt InstallationTo Adjust Brake Transaxle Gear Shift Lever AdjustmentTo Start Engine with a Weak Battery To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER Interlocks and Relays Replacing BatteryTo Remove Hood and Grill Assembly To Replace Headlight BulbTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor Cylinders TractorFuel System Engine OILProblem CauseCorrection Correction Troubleshooting ChartProblem CauseOFF Problem CauseOptional Tractor - Model Number SchematicTractor - Model Number 917,270751 Electrical Switch, Interlock Tractor - Model Number747604!2 111 HAsSlS AHOEHcLOSUEs114 Keeper Belt Rear Lh Stl P930 Tractor --MODEL Number Chassis and Enclosures13 172107X010 Panel, Dash, R.H 30 164918X558 Fend/FtrestTractor - Model Number Ground Drive 113 !27285X Strap Torque 90 Degrees Tractor - Model Number Ground DriveIti Tractor - Model Number 917.270751 Steering Assembly169839 139768154427 169840Tractor - Model Number Engine Engine 134300 140123140551 71110616Wheels & Tires DecalsTractor - Model Number Lift Assembly KEY Part NO. NO.DESCRIPTION 117 Tractor - Model Number Mower DeckTractor - Model Number Mower Deck Numbers Here Part Description 1026 929216 Requiresspecialtools 265Instructionmanual 573 635578 363Fuel Transfer Tube KEY Part NO. no Page Page Page Page Suggested Guide for Sighting Slopes for Safe Operation Days a week Get it fixed, at your home or ours

917.270751 specifications

The Craftsman 917.270751 is a powerful lawn tractor designed for homeowners who demand efficiency and performance in maintaining their lawns. This model seamlessly combines cutting-edge technology, user-friendly features, and durable construction to provide a reliable solution for lawn care.

One of the standout features of the Craftsman 917.270751 is its robust engine. Equipped with a 21.5 HP Briggs & Stratton engine, it offers ample power to tackle various mowing tasks. This engine is designed for smooth operation and durability, ensuring that it can handle large yards and diverse terrain with ease. The automatic transmission further enhances the user experience by allowing smooth speed transitions without the need for manual gear changes.

Another noteworthy characteristic of the Craftsman 917.270751 is its cutting deck. The model features a 42-inch cutting deck, which provides a wide mowing path for efficient grass cutting. This size is ideal for medium to large lawns, allowing users to complete their mowing tasks in less time. The deck is designed for quick height adjustments, accommodating various grass lengths and ensuring a clean, precise cut every time.

The tractor also includes the innovative mulching capability, allowing users to finely chop grass clippings and return them to the lawn, enhancing soil health and reducing waste. This feature not only saves time on yard maintenance but also promotes a healthier lawn ecosystem.

User comfort and convenience are prioritized in the Craftsman 917.270751. The adjustable seat provides ergonomic support during long mowing sessions, while the easy-to-use controls ensure that operators of all skill levels can navigate the tractor effortlessly. Coupled with a tight turning radius, maneuvering around flower beds and tight corners becomes a hassle-free task.

In terms of durability, the Craftsman 917.270751 is built with a heavy-duty steel frame and deck, ensuring it can withstand the challenges of regular use. The tractor comes with a warranty, providing peace of mind for owners regarding its longevity and performance.

In summary, the Craftsman 917.270751 stands out as a well-rounded lawn tractor equipped with features designed for power, efficiency, and user comfort. Its combination of a reliable engine, versatile cutting deck, and innovative technology makes it an excellent choice for homeowners seeking to maintain a pristine lawn with ease.
Top Page Image Contents