Craftsman C944.511591 Know Your Brushcutter Attachment, Blade, Operating the Coupler

HARNESS

ADJUSTMENT

FOR	BALANCE
	30i
6 inches
below	4 - 12
waist	inches
	above
	ground

KNOW YOUR BRUSHCUTTER ATTACHMENT

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiar-

ize yourself with the location of various controls and adjustments. Save this manual for future reference.

Hanger j

Blade Shield__ Blade

BLADE

The BLADE is designed for cutting grass,

weeds, and brush up to 1/2 inch (1 cm) in diameter.

OPERATING THE COUPLER

Your powerhead is equipped with a coupler which enables optional attach- ments to be installed. The optional at-

tachments	are:
Edger	71-51157
Cultivator	71-51158
Blower	71-51160
Pruner	71-51161

_k WARNING: Always disconnect

powerhead spark plug before remov- ing or installing attachments.

BLADE SHIELD

The BLADE SHIELD provides protection from the spinning blade.

REMOVING ATTACHMENT

CAUTION: When removing or instal-

ling attachments, place the powerhead and attachment on a flat surface for

stability.

1.Loosen the coupler by turning the knob counterclockwise.