Craftsman 917.276920 To Operate Mower, Using the Reverse Operation System, To Operate on Hills

Page 16

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut with at- tachment lift lever.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher,

on mowers so equipped, or the deflector shield (S)in place.

REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direc- tion with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

_WARNING: Backing up with the at- tachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with

the attachment engaged. Do not mow in

reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

1.Depress brake pedal all the way down.

2.With engine running, turn ignition key

counterclockwise to ROS "ON" posi- tion.

3.Look down and behind before and while backing.

4.Slowly depress reverse drive pedal to start movement.

5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" Position Engine "ON" Position (Normal Operating)

TO OPERATE ON HILLS

_L.WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual.

•Choose the slowest speed before start- ing up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowly depress appropriate drive pedal to slowest setting.

•Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing

freewheel control in freewheeling position. Freewheel control is located at the rear

drawbar of tractor.

1.Raise attachment lift lever to its highest position.

2.Pull freewheel control out and into the slot and release so it is held in the disengaged position.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Crrftsmiin Days on Battery Limited Warranty on Craftsman Tractor and BatteryYear on Tractor General Operation Service Safe Handling of Gasoline I1. Slope OperationII1. Children IV. TowingGeneral Service Customer Responsibilities ProductRepair Protection Agreements Mower Front Wheel Tools Required for Assembly Check BatteryAdjust Seat To Remove Tractor from Carton Unpack CartonAssemble Front Wheel to Mower Install Mower and Drive BeltAttach Mower Side Suspension 02937 Checklist Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsAutomatic Models only Attachment Clutch Switch Know Your TractorMower Blades Ground Drive HOW to USE Your Tractor To SET Parking BrakeEngine To Adjust Gauge Wheels Using the Reverse Operation System To Operate MowerTo Operate on Hills To TransportTowing Carts and Other Atfachments Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start EnginePurge Transmission Automatic Transmission Warm UPMowing Tips Maintenance Schedule EachSeason Storaqe USE Hours Hours Hours HoursBattery Transaxle Pump Fluid BeltsEngine Lubrication To Change Engine OILMuffler Clean AIR INTAKE/COOLING AreasIN-LINE Fuel Filter Cleaning To Remove MowerTo Install Mower Visual SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment Precision SIDE-TO-SIDE AdjustmentMower Drive Belt Installation Mower Drive Belt RemovalTo Adjust Attachment Clutch Belt InstallationTo Replace Motion Drive Belt Belt RemovalTo Start Engine with a Weak BAT Tery Replacing Battery Engine Fuel SystemEngine OIL CylindersCorrection CauseStart Troubleshootingchart Problem Cause CorrectionLoss of power Poor cut unevenNot rotate FastNot Across Hill Only Ride UP and Down HillDegrees MAX Anos Para EL Tractor DiAS Para LA BATERiAFUNClONAMIENTO General IV. Remolque Operaciones DE Servicio GeneralesPage Especificaciones DEL Producto API-SG-SLResponsabilidades DEL Cliente Acuerdos DE Proteccion Para LA ReparacionSe a0ora Tubo de desageHerramientas Necesarias Para EL Montaje Verifique LA BateriaPara Hacer Rodar EL Tractor Remover EL Tractor DE LA PlataMonte Rueda Delatentera DE LA Segadora Instale Primero LA Barra ANTI-BAL- Anceo SFijelaspiezasdepropulsionpos Revision DE LA Nivelaoion DEL Conjunto Revision DE LA Presion DE LAS LlantasRevision DE LA Posicion Adecua DA DE Todas LAS Correas @@@@ SU Tractor Familiaricese CON SU TractorInterruptor DE LA LUZ Enciende y apaga las luces delanteras Parada Cuchillas DE LA Segadora Impulsion DE RecorridoMotor Para Usar EL Control DE LA AcelerPara Usar EL Control DE Estrangulacion N Moverse Hacia Adelante Y Hacia AtrasUtilizar EL Mando Crucero Para Ajustar LA Altura DE Corte DE LA SegadoraUsar EL Sistema DE Funcionamiento Para Operar LA SegadoraPara Parar LAS Cuchillas DE LA Sega Para Operar EN CerrosMecanismo DE Aviso DE SERVIClO Transmision DesenganchadaAntes DE Hacer Arrancar EL Motor Arranque CON Tiempo Templado 50 Y M,,S Para Hacer Arrancar EL MotorCalentamiento Para LA Transmision Automatica Consejos Para Segar Recomendaciones Generales Programade MantenimientoAntes DE Cada USO Tractor Cuidado DE LA CuchillaRemocion DE LA Cuchilla BaterjaEnfriamiento DEL Transeje Nivel DEL Fluido DE LA Bomba DEL TransejeCorreas Motor LubricacionLimpieza DE LA Rejilla DE Aire Limpieza DE LA Entrada DE AIRE/AREAS DE EnfriamentoBUJiAS LimpiezaPara Desmontar LA Cortadora Para Instalar LA SegadoraAjuste DE Delante a ATR,.S Para Nivelar LA SegadoraRegulacion DE LA Precision DE Lado Desmontaje DE LA Correa DE TRANS- Mision DE LA Segadora Montaje DE LA Correa DE TRANSMIS- ION DE LA SegadoraPara Ajustar EL Embrague DEL ACCE- Sorio Para Cambiar LA Correa DE Impul Sion DE MovimientoDesmontaje DE LA Correa Montaje DE LA CorreaPara Verificar SI Funciona Bien EL Freno Impresion / Inclinacion DE LAS RUE DAS DelanterasPara Remover LAS Ruedas Para Hacer Reparaciones Para Hacer Arrancar EL Motor CON UNA Baterja BajaPara Cambiar LA Bombilla DE LA LUZ Delantera Reemplazar LA BateriaMotor Aceite DEL Motor Motor Sistema DE CombustibleOtros Identificacion DE Problemas ProblemaProblemacausa Vibracion Excesiva El tractor se ponProblema Causa Correccion Operacion Segura Grados MAXSerifs

917.276920 specifications

The Craftsman 917.276920 is a versatile and reliable lawn tractor designed to tackle a range of outdoor tasks while delivering exceptional performance. This machine is equipped with advanced features and technologies that make lawn care easier and more efficient for homeowners.

One of the key characteristics of the Craftsman 917.276920 is its powerful engine. It typically comes with a robust 24 horsepower Kohler engine that provides ample power for cutting even the thickest grass. The engine is designed for reliability and durability, ensuring that users can depend on it for multiple seasons of heavy use.

The cutting deck is another standout feature of the Craftsman 917.276920. With a 54-inch cutting width, it allows for fast mowing over large areas. The deck height is adjustable, providing users with the flexibility to achieve the perfect lawn height, whether they prefer a short, manicured look or a longer, more natural appearance. The mower also features a dual-blade system that further enhances cutting performance, ensuring a clean and even finish.

In terms of user comfort, the Craftsman 917.276920 is designed with ergonomics in mind. It comes with an adjustable high-back seat that provides support during long mowing sessions. The steering system is also user-friendly, featuring a smooth and responsive maneuverability that makes navigating tight spaces and obstacles easy. Additionally, the tractor's controls are intuitively placed for straightforward operation, reducing the learning curve for new users.

Another important feature of this lawn tractor is its versatility. The Craftsman 917.276920 is compatible with various attachments, including baggers, mulchers, and even snow blowers, allowing it to handle multiple tasks throughout the year. This adaptability makes it a valuable tool for homeowners looking to maintain their yards across seasons.

For those concerned about maintenance, the Craftsman 917.276920 includes features designed for easy upkeep. The engine is equipped with an easy-access oil fill and filter, simplifying routine maintenance. The cutting deck can also be easily removed for cleaning and servicing, ensuring that the mower stays in peak condition.

Overall, the Craftsman 917.276920 lawn tractor combines power, comfort, and versatility, making it an excellent choice for homeowners seeking a reliable solution for their lawn care needs. Its advanced features and technologies contribute to a practical and enjoyable mowing experience, allowing users to achieve professional-looking results in their own backyard.
Top Page Image Contents