Craftsman 917.276920 manual Transaxle Pump Fluid, Belts, Engine Lubrication, To Change Engine OIL

Page 22

Adding or checking levelof electrolyteis not necessary.

TO CLEAN BATTERYANDTERMINALS

Corrosionand dirt on the batteryand terminalscan causethe batteryto "leak" power.

1.DisconnectBLACKbatterycablefirst then RED batterycableand remove batteryfrom tractor.

2.Rinsethe batterywith plain water and dry.

3.Cleanterminalsand batterycableends with wire brush until bright.

4.Coat terminalswith greaseor petro- leumjelly.

5.Reinstallbattery(See "REPLACING BATTERY"in the SERVICEAND AD-

JUSTMENTSsection of this manual).

TRANSAXLE COOLING

The transmissionfan and coolingfins should be keptclean to assure proper cooling.

Do notattemptto cleanfan or transmis- sionwhile engine is runningor while the

transmissionis hot.Topreventpossible damageto seals, do notuse high pressure water or steamto clean transaxle.

Inspectcoolingfan to be sure fan blades are intactand clean.

Inspectcoolingfins for dirt, grassclip- pingsand other materials. Toprevent damageto seals, do not use com- pressedair or high pressuresprayerto cleancoolingfins.

TRANSAXLE PUMP FLUID

The transaxle was sealed at the factory and fluid maintenance is not required for the life of the transaxle. Should the trans- axle ever leak or require servicing, contact your nearest Sears or other qualified service center.

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL.

Select the oil's SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

-30

-20

-10

0

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oi_vi_cha_t4e

Change the oil after every 50 hours of op- eration or at least once a year if the tractor

is not used for 50 hours in one year. Check the crankcase oil level before start-

ing the engine and after each eight (8) hours of operation.

TO CHANGE ENGINE OIL

Determine temperature range expected

before oil change. All oil must meet API service classification SG-SL.

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

1.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

2.Remove yellow cap from end of drain valve and install the drain tube onto the

fitting.

Oil Drain Valve

LF°C_edn _

 

X

Closed and

_

_.

Yellow

('-.-- ,

-"

"Tnu ie

3.Unlock drain valve by pushing inward slightly and turning counterclockwise.

4.To open, pull out on the drain valve.

5.After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

6.Remove the drain tube and replace the cap onto the end of the drain valve.

7.Refill engine with oil through oil fill dip- stick tube. Pour slowly. Do not overfill.

For approximate capacity see "PROD-

UCT SPECIFICATIONS" section of this manual.

8.Use gauge on oil fill cap/dipstick for checking level. For accurate reading, insert dipstick into the tube and push down firmly into place before removing. Keep oil up to, but not over, the "FULl" line on dipstick. Push dipstick down firmly into the tube when finished.

22

Image 22
Contents Crrftsmiin Days on Battery Limited Warranty on Craftsman Tractor and BatteryYear on Tractor General Operation II1. Children Service Safe Handling of GasolineI1. Slope Operation IV. TowingGeneral Service Customer Responsibilities ProductRepair Protection Agreements Mower Front Wheel Adjust Seat Tools Required for AssemblyCheck Battery To Remove Tractor from Carton Unpack CartonAssemble Front Wheel to Mower Install Mower and Drive BeltAttach Mower Side Suspension 02937 Check Deck Levelness ChecklistCheck Tire Pressure Check for Proper Position of ALL BeltsAutomatic Models only Attachment Clutch Switch Know Your TractorMower Blades Ground Drive HOW to USE Your Tractor To SET Parking BrakeEngine To Adjust Gauge Wheels To Operate on Hills Using the Reverse Operation SystemTo Operate Mower To TransportADD Gasoline Towing Carts and Other AtfachmentsBefore Starting the Engine Check Engine OIL Level To Start EnginePurge Transmission Automatic Transmission Warm UPMowing Tips Season Storaqe MaintenanceSchedule Each USE Hours Hours Hours HoursBattery Engine Lubrication Transaxle Pump FluidBelts To Change Engine OILMuffler Clean AIR INTAKE/COOLING AreasIN-LINE Fuel Filter Cleaning To Remove MowerFRONT-TO-BACK Adjustment To Install MowerVisual SIDE-TO-SIDE Adjustment Precision SIDE-TO-SIDE AdjustmentMower Drive Belt Installation Mower Drive Belt RemovalTo Replace Motion Drive Belt To Adjust Attachment ClutchBelt Installation Belt RemovalTo Start Engine with a Weak BAT Tery Replacing Battery Engine OIL EngineFuel System CylindersCorrection CauseStart Loss of power TroubleshootingchartProblem Cause Correction Poor cut unevenNot rotate FastNot Across Hill Only Ride UP and Down HillDegrees MAX Anos Para EL Tractor DiAS Para LA BATERiAFUNClONAMIENTO General IV. Remolque Operaciones DE Servicio GeneralesPage Responsabilidades DEL Cliente Especificaciones DEL ProductoAPI-SG-SL Acuerdos DE Proteccion Para LA ReparacionSe a0ora Tubo de desagePara Hacer Rodar EL Tractor Herramientas Necesarias Para EL MontajeVerifique LA Bateria Remover EL Tractor DE LA PlataMonte Rueda Delatentera DE LA Segadora Instale Primero LA Barra ANTI-BAL- Anceo SFijelaspiezasdepropulsionpos Revision DE LA Nivelaoion DEL Conjunto Revision DE LA Presion DE LAS LlantasRevision DE LA Posicion Adecua DA DE Todas LAS Correas @@@@ SU Tractor Familiaricese CON SU TractorInterruptor DE LA LUZ Enciende y apaga las luces delanteras Motor Parada Cuchillas DE LA SegadoraImpulsion DE Recorrido Para Usar EL Control DE LA AcelerUtilizar EL Mando Crucero Para Usar EL Control DE Estrangulacion NMoverse Hacia Adelante Y Hacia Atras Para Ajustar LA Altura DE Corte DE LA SegadoraPara Parar LAS Cuchillas DE LA Sega Usar EL Sistema DE FuncionamientoPara Operar LA Segadora Para Operar EN CerrosMecanismo DE Aviso DE SERVIClO Transmision DesenganchadaAntes DE Hacer Arrancar EL Motor Arranque CON Tiempo Templado 50 Y M,,S Para Hacer Arrancar EL MotorCalentamiento Para LA Transmision Automatica Consejos Para Segar Recomendaciones Generales Programade MantenimientoAntes DE Cada USO Remocion DE LA Cuchilla TractorCuidado DE LA Cuchilla BaterjaCorreas Enfriamiento DEL TransejeNivel DEL Fluido DE LA Bomba DEL Transeje Motor LubricacionBUJiAS Limpieza DE LA Rejilla DE AireLimpieza DE LA Entrada DE AIRE/AREAS DE Enfriamento LimpiezaPara Desmontar LA Cortadora Para Instalar LA SegadoraAjuste DE Delante a ATR,.S Para Nivelar LA SegadoraRegulacion DE LA Precision DE Lado Desmontaje DE LA Correa DE TRANS- Mision DE LA Segadora Montaje DE LA Correa DE TRANSMIS- ION DE LA SegadoraDesmontaje DE LA Correa Para Ajustar EL Embrague DEL ACCE- SorioPara Cambiar LA Correa DE Impul Sion DE Movimiento Montaje DE LA CorreaPara Remover LAS Ruedas Para Hacer Reparaciones Para Verificar SI Funciona Bien EL FrenoImpresion / Inclinacion DE LAS RUE DAS Delanteras Para Hacer Arrancar EL Motor CON UNA Baterja BajaPara Cambiar LA Bombilla DE LA LUZ Delantera Reemplazar LA BateriaMotor Aceite DEL Motor Motor Sistema DE CombustibleOtros Identificacion DE Problemas ProblemaProblemacausa Vibracion Excesiva El tractor se ponProblema Causa Correccion Operacion Segura Grados MAXSerifs

917.276920 specifications

The Craftsman 917.276920 is a versatile and reliable lawn tractor designed to tackle a range of outdoor tasks while delivering exceptional performance. This machine is equipped with advanced features and technologies that make lawn care easier and more efficient for homeowners.

One of the key characteristics of the Craftsman 917.276920 is its powerful engine. It typically comes with a robust 24 horsepower Kohler engine that provides ample power for cutting even the thickest grass. The engine is designed for reliability and durability, ensuring that users can depend on it for multiple seasons of heavy use.

The cutting deck is another standout feature of the Craftsman 917.276920. With a 54-inch cutting width, it allows for fast mowing over large areas. The deck height is adjustable, providing users with the flexibility to achieve the perfect lawn height, whether they prefer a short, manicured look or a longer, more natural appearance. The mower also features a dual-blade system that further enhances cutting performance, ensuring a clean and even finish.

In terms of user comfort, the Craftsman 917.276920 is designed with ergonomics in mind. It comes with an adjustable high-back seat that provides support during long mowing sessions. The steering system is also user-friendly, featuring a smooth and responsive maneuverability that makes navigating tight spaces and obstacles easy. Additionally, the tractor's controls are intuitively placed for straightforward operation, reducing the learning curve for new users.

Another important feature of this lawn tractor is its versatility. The Craftsman 917.276920 is compatible with various attachments, including baggers, mulchers, and even snow blowers, allowing it to handle multiple tasks throughout the year. This adaptability makes it a valuable tool for homeowners looking to maintain their yards across seasons.

For those concerned about maintenance, the Craftsman 917.276920 includes features designed for easy upkeep. The engine is equipped with an easy-access oil fill and filter, simplifying routine maintenance. The cutting deck can also be easily removed for cleaning and servicing, ensuring that the mower stays in peak condition.

Overall, the Craftsman 917.276920 lawn tractor combines power, comfort, and versatility, making it an excellent choice for homeowners seeking a reliable solution for their lawn care needs. Its advanced features and technologies contribute to a practical and enjoyable mowing experience, allowing users to achieve professional-looking results in their own backyard.