Craftsman 917.276920 manual Fuel System, Engine OIL, Cylinders, Other

Page 30

Immediately prepare your tractor for stor- age at the end of the season or if the trac-

_i_ will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

When tractor is to be stored for a period

of time, clean it thoroughly, remove all dirt,

grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See "CLEANING" in the Maintenance section of this

manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected

and battery cleaned thoroughly (see "TO

CLEAN BATTERY AND TERMINALS" in

the Maintenance section of this manual).

After cleaning, leave cables discon- nected and place cables where they

cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of

acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carbure- tor. Do not empty the gas tank and carbu- retor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark plug hole(s) into cylinder(s).

3.Turn ignition key to start position for a few seconds to distribute oil.

4.Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable pro- tective cover that does not retain mois-

ture. Do not use plastic. Plastic cannot

breathe which allows condensation to

form and will cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

30

Image 30
Contents Crrftsmiin Limited Warranty on Craftsman Tractor and Battery Days on BatteryYear on Tractor General Operation II1. Children Service Safe Handling of GasolineI1. Slope Operation IV. TowingGeneral Service Product Customer ResponsibilitiesRepair Protection Agreements Mower Front Wheel Adjust Seat Tools Required for AssemblyCheck Battery To Remove Tractor from Carton Unpack CartonInstall Mower and Drive Belt Assemble Front Wheel to MowerAttach Mower Side Suspension 02937 Check Deck Levelness ChecklistCheck Tire Pressure Check for Proper Position of ALL BeltsAutomatic Models only Attachment Clutch Switch Know Your TractorHOW to USE Your Tractor To SET Parking Brake Mower Blades Ground DriveEngine To Adjust Gauge Wheels To Operate on Hills Using the Reverse Operation SystemTo Operate Mower To TransportADD Gasoline Towing Carts and Other AtfachmentsBefore Starting the Engine Check Engine OIL Level To Start EnginePurge Transmission Automatic Transmission Warm UPMowing Tips Season Storaqe MaintenanceSchedule Each USE Hours Hours Hours HoursBattery Engine Lubrication Transaxle Pump FluidBelts To Change Engine OILClean AIR INTAKE/COOLING Areas MufflerIN-LINE Fuel Filter Cleaning To Remove MowerFRONT-TO-BACK Adjustment To Install MowerVisual SIDE-TO-SIDE Adjustment Precision SIDE-TO-SIDE AdjustmentMower Drive Belt Installation Mower Drive Belt RemovalTo Replace Motion Drive Belt To Adjust Attachment ClutchBelt Installation Belt RemovalTo Start Engine with a Weak BAT Tery Replacing Battery Engine OIL EngineFuel System CylindersCause CorrectionStart Loss of power TroubleshootingchartProblem Cause Correction Poor cut unevenNot rotate FastOnly Ride UP and Down Hill Not Across HillDegrees MAX Anos Para EL Tractor DiAS Para LA BATERiAFUNClONAMIENTO General IV. Remolque Operaciones DE Servicio GeneralesPage Responsabilidades DEL Cliente Especificaciones DEL ProductoAPI-SG-SL Acuerdos DE Proteccion Para LA ReparacionSe a0ora Tubo de desagePara Hacer Rodar EL Tractor Herramientas Necesarias Para EL MontajeVerifique LA Bateria Remover EL Tractor DE LA PlataMonte Rueda Delatentera DE LA Segadora Instale Primero LA Barra ANTI-BAL- Anceo SFijelaspiezasdepropulsionpos Revision DE LA Presion DE LAS Llantas Revision DE LA Nivelaoion DEL ConjuntoRevision DE LA Posicion Adecua DA DE Todas LAS Correas @@@@ Familiaricese CON SU Tractor SU TractorInterruptor DE LA LUZ Enciende y apaga las luces delanteras Motor Parada Cuchillas DE LA SegadoraImpulsion DE Recorrido Para Usar EL Control DE LA AcelerUtilizar EL Mando Crucero Para Usar EL Control DE Estrangulacion NMoverse Hacia Adelante Y Hacia Atras Para Ajustar LA Altura DE Corte DE LA SegadoraPara Parar LAS Cuchillas DE LA Sega Usar EL Sistema DE FuncionamientoPara Operar LA Segadora Para Operar EN CerrosTransmision Desenganchada Mecanismo DE Aviso DE SERVIClOAntes DE Hacer Arrancar EL Motor Para Hacer Arrancar EL Motor Arranque CON Tiempo Templado 50 Y M,,SCalentamiento Para LA Transmision Automatica Consejos Para Segar Programade Mantenimiento Recomendaciones GeneralesAntes DE Cada USO Remocion DE LA Cuchilla TractorCuidado DE LA Cuchilla BaterjaCorreas Enfriamiento DEL TransejeNivel DEL Fluido DE LA Bomba DEL Transeje Motor LubricacionBUJiAS Limpieza DE LA Rejilla DE AireLimpieza DE LA Entrada DE AIRE/AREAS DE Enfriamento LimpiezaPara Desmontar LA Cortadora Para Instalar LA SegadoraPara Nivelar LA Segadora Ajuste DE Delante a ATR,.SRegulacion DE LA Precision DE Lado Desmontaje DE LA Correa DE TRANS- Mision DE LA Segadora Montaje DE LA Correa DE TRANSMIS- ION DE LA SegadoraDesmontaje DE LA Correa Para Ajustar EL Embrague DEL ACCE- SorioPara Cambiar LA Correa DE Impul Sion DE Movimiento Montaje DE LA CorreaPara Remover LAS Ruedas Para Hacer Reparaciones Para Verificar SI Funciona Bien EL FrenoImpresion / Inclinacion DE LAS RUE DAS Delanteras Para Hacer Arrancar EL Motor CON UNA Baterja BajaReemplazar LA Bateria Para Cambiar LA Bombilla DE LA LUZ DelanteraMotor Motor Sistema DE Combustible Aceite DEL MotorOtros Identificacion DE Problemas ProblemaProblemacausa Vibracion Excesiva El tractor se ponProblema Causa Correccion Operacion Segura Grados MAXSerifs

917.276920 specifications

The Craftsman 917.276920 is a versatile and reliable lawn tractor designed to tackle a range of outdoor tasks while delivering exceptional performance. This machine is equipped with advanced features and technologies that make lawn care easier and more efficient for homeowners.

One of the key characteristics of the Craftsman 917.276920 is its powerful engine. It typically comes with a robust 24 horsepower Kohler engine that provides ample power for cutting even the thickest grass. The engine is designed for reliability and durability, ensuring that users can depend on it for multiple seasons of heavy use.

The cutting deck is another standout feature of the Craftsman 917.276920. With a 54-inch cutting width, it allows for fast mowing over large areas. The deck height is adjustable, providing users with the flexibility to achieve the perfect lawn height, whether they prefer a short, manicured look or a longer, more natural appearance. The mower also features a dual-blade system that further enhances cutting performance, ensuring a clean and even finish.

In terms of user comfort, the Craftsman 917.276920 is designed with ergonomics in mind. It comes with an adjustable high-back seat that provides support during long mowing sessions. The steering system is also user-friendly, featuring a smooth and responsive maneuverability that makes navigating tight spaces and obstacles easy. Additionally, the tractor's controls are intuitively placed for straightforward operation, reducing the learning curve for new users.

Another important feature of this lawn tractor is its versatility. The Craftsman 917.276920 is compatible with various attachments, including baggers, mulchers, and even snow blowers, allowing it to handle multiple tasks throughout the year. This adaptability makes it a valuable tool for homeowners looking to maintain their yards across seasons.

For those concerned about maintenance, the Craftsman 917.276920 includes features designed for easy upkeep. The engine is equipped with an easy-access oil fill and filter, simplifying routine maintenance. The cutting deck can also be easily removed for cleaning and servicing, ensuring that the mower stays in peak condition.

Overall, the Craftsman 917.276920 lawn tractor combines power, comfort, and versatility, making it an excellent choice for homeowners seeking a reliable solution for their lawn care needs. Its advanced features and technologies contribute to a practical and enjoyable mowing experience, allowing users to achieve professional-looking results in their own backyard.