Craftsman 917.276920 manual Battery

Page 21

TRACTOR

Always observe safety rules when per- forming any maintenance.

BRAKE OPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See PSI on tires).

Keep tires free of gasoline, oil, or insect control chemicals which can harm rub-

ber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS) Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as de- scribed, repair the problem immediately.

The engine should not start unless the

brake pedal is fully depressed, and the attachment clutch control is in the disen-

gaged position.

CHECK OPERATOR PRESENCE

SYSTEM

When the engine is running, any at- tempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any at- tempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never op- erate unless the operator is in the seat.

CHECK REVERSE OPERATION (ROS) SYSTEM

When the engine is running with the ignition switch in the engine "ON" posi- tion and the attachment clutch engaged, any attempt by the operator to shift into reverse should shut off the engine.

ROS "ON" Position Engine "ON" Position (Normal Operating)

When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to shift into

reverse should NOT shut off the engine.

BLADE CARE

For best results mower blades must be sharp. Replace worn, bent or damaged blades.

_1, CAUTION: Use only a replacement blade approved by the manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL

1.Raise mower to highest position to al- low access to blades.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

2.Remove blade bolt by turning counter- clockwise.

3.Install new blade with stamped "GRASS SIDE" facing the ground.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Install and tighten blade bolt securely

(45-55 Ft. Lbs. torque).

IMPORTANT: Special blade bolt is heat treated.

 

Blade

 

Mandrel

Blade Bolt

Assembly

Center Hole

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. How-

ever, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not

21 attempt to open or remove caps or covers.

Image 21
Contents Crrftsmiin Limited Warranty on Craftsman Tractor and Battery Days on BatteryYear on Tractor General Operation I1. Slope Operation Service Safe Handling of GasolineII1. Children IV. TowingGeneral Service Product Customer ResponsibilitiesRepair Protection Agreements Mower Front Wheel Check Battery Tools Required for AssemblyAdjust Seat To Remove Tractor from Carton Unpack CartonInstall Mower and Drive Belt Assemble Front Wheel to MowerAttach Mower Side Suspension 02937 Check Tire Pressure ChecklistCheck Deck Levelness Check for Proper Position of ALL BeltsAutomatic Models only Know Your Tractor Attachment Clutch SwitchHOW to USE Your Tractor To SET Parking Brake Mower Blades Ground DriveEngine To Adjust Gauge Wheels To Operate Mower Using the Reverse Operation SystemTo Operate on Hills To TransportBefore Starting the Engine Check Engine OIL Level Towing Carts and Other AtfachmentsADD Gasoline To Start EngineAutomatic Transmission Warm UP Purge TransmissionMowing Tips Schedule Each MaintenanceSeason Storaqe USE Hours Hours Hours HoursBattery Belts Transaxle Pump FluidEngine Lubrication To Change Engine OILClean AIR INTAKE/COOLING Areas MufflerIN-LINE Fuel Filter To Remove Mower CleaningVisual SIDE-TO-SIDE Adjustment To Install MowerFRONT-TO-BACK Adjustment Precision SIDE-TO-SIDE AdjustmentMower Drive Belt Removal Mower Drive Belt InstallationBelt Installation To Adjust Attachment ClutchTo Replace Motion Drive Belt Belt RemovalTo Start Engine with a Weak BAT Tery Replacing Battery Fuel System EngineEngine OIL CylindersCause CorrectionStart Problem Cause Correction TroubleshootingchartLoss of power Poor cut unevenFast Not rotateOnly Ride UP and Down Hill Not Across HillDegrees MAX DiAS Para LA BATERiA Anos Para EL TractorFUNClONAMIENTO General Operaciones DE Servicio Generales IV. RemolquePage API-SG-SL Especificaciones DEL ProductoResponsabilidades DEL Cliente Acuerdos DE Proteccion Para LA ReparacionTubo de desage Se a0oraVerifique LA Bateria Herramientas Necesarias Para EL MontajePara Hacer Rodar EL Tractor Remover EL Tractor DE LA PlataInstale Primero LA Barra ANTI-BAL- Anceo S Monte Rueda Delatentera DE LA SegadoraFijelaspiezasdepropulsionpos Revision DE LA Presion DE LAS Llantas Revision DE LA Nivelaoion DEL ConjuntoRevision DE LA Posicion Adecua DA DE Todas LAS Correas @@@@ Familiaricese CON SU Tractor SU TractorInterruptor DE LA LUZ Enciende y apaga las luces delanteras Impulsion DE Recorrido Parada Cuchillas DE LA SegadoraMotor Para Usar EL Control DE LA AcelerMoverse Hacia Adelante Y Hacia Atras Para Usar EL Control DE Estrangulacion NUtilizar EL Mando Crucero Para Ajustar LA Altura DE Corte DE LA SegadoraPara Operar LA Segadora Usar EL Sistema DE FuncionamientoPara Parar LAS Cuchillas DE LA Sega Para Operar EN CerrosTransmision Desenganchada Mecanismo DE Aviso DE SERVIClOAntes DE Hacer Arrancar EL Motor Para Hacer Arrancar EL Motor Arranque CON Tiempo Templado 50 Y M,,SCalentamiento Para LA Transmision Automatica Consejos Para Segar Programade Mantenimiento Recomendaciones GeneralesAntes DE Cada USO Cuidado DE LA Cuchilla TractorRemocion DE LA Cuchilla BaterjaNivel DEL Fluido DE LA Bomba DEL Transeje Enfriamiento DEL TransejeCorreas Motor LubricacionLimpieza DE LA Entrada DE AIRE/AREAS DE Enfriamento Limpieza DE LA Rejilla DE AireBUJiAS LimpiezaPara Instalar LA Segadora Para Desmontar LA CortadoraPara Nivelar LA Segadora Ajuste DE Delante a ATR,.SRegulacion DE LA Precision DE Lado Montaje DE LA Correa DE TRANSMIS- ION DE LA Segadora Desmontaje DE LA Correa DE TRANS- Mision DE LA SegadoraPara Cambiar LA Correa DE Impul Sion DE Movimiento Para Ajustar EL Embrague DEL ACCE- SorioDesmontaje DE LA Correa Montaje DE LA CorreaImpresion / Inclinacion DE LAS RUE DAS Delanteras Para Verificar SI Funciona Bien EL FrenoPara Remover LAS Ruedas Para Hacer Reparaciones Para Hacer Arrancar EL Motor CON UNA Baterja BajaReemplazar LA Bateria Para Cambiar LA Bombilla DE LA LUZ DelanteraMotor Motor Sistema DE Combustible Aceite DEL MotorOtros Problema Identificacion DE ProblemasVibracion Excesiva El tractor se pon ProblemacausaProblema Causa Correccion Grados MAX Operacion SeguraSerifs

917.276920 specifications

The Craftsman 917.276920 is a versatile and reliable lawn tractor designed to tackle a range of outdoor tasks while delivering exceptional performance. This machine is equipped with advanced features and technologies that make lawn care easier and more efficient for homeowners.

One of the key characteristics of the Craftsman 917.276920 is its powerful engine. It typically comes with a robust 24 horsepower Kohler engine that provides ample power for cutting even the thickest grass. The engine is designed for reliability and durability, ensuring that users can depend on it for multiple seasons of heavy use.

The cutting deck is another standout feature of the Craftsman 917.276920. With a 54-inch cutting width, it allows for fast mowing over large areas. The deck height is adjustable, providing users with the flexibility to achieve the perfect lawn height, whether they prefer a short, manicured look or a longer, more natural appearance. The mower also features a dual-blade system that further enhances cutting performance, ensuring a clean and even finish.

In terms of user comfort, the Craftsman 917.276920 is designed with ergonomics in mind. It comes with an adjustable high-back seat that provides support during long mowing sessions. The steering system is also user-friendly, featuring a smooth and responsive maneuverability that makes navigating tight spaces and obstacles easy. Additionally, the tractor's controls are intuitively placed for straightforward operation, reducing the learning curve for new users.

Another important feature of this lawn tractor is its versatility. The Craftsman 917.276920 is compatible with various attachments, including baggers, mulchers, and even snow blowers, allowing it to handle multiple tasks throughout the year. This adaptability makes it a valuable tool for homeowners looking to maintain their yards across seasons.

For those concerned about maintenance, the Craftsman 917.276920 includes features designed for easy upkeep. The engine is equipped with an easy-access oil fill and filter, simplifying routine maintenance. The cutting deck can also be easily removed for cleaning and servicing, ensuring that the mower stays in peak condition.

Overall, the Craftsman 917.276920 lawn tractor combines power, comfort, and versatility, making it an excellent choice for homeowners seeking a reliable solution for their lawn care needs. Its advanced features and technologies contribute to a practical and enjoyable mowing experience, allowing users to achieve professional-looking results in their own backyard.