Craftsman 917.2759 manual To Transport, To Operate on Hills, Transmission Disengaged, ADD Gasoline

Page 13

TO OPERATE ON HILLS

,j_WARNJNG: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual.

*Choose the slowest speed before start- ing up or down hills.

*Avoid stopping or changing speed on hills.

*If slowing is necessary, move throttle control lever to slower position.

*If stopping is absolutely necessary,

push clutch/brake pedal quickly to brake position and engage parking brake.

*Move motion control lever to neutral (N)

position.

IMPORTANT." The motion control lever

does not return to neutraJ (N) position

when the clutch/brake pedal is depressed.

,To restart movement, slowly release

parking brake and clutch/brake pedal.

,Slowly move motion control lever to slowest setting.

,Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Freewheel control is located at the rear drawbar of tractor.

1.Raise attachment lift to highest posi- tion with attachment lift control.

2.Pull freewheel control out and down into the slot and release so it is held in

the disengaged position.

,Do not push or tow tractor at more than two (2) MPH.

,To re-engage transmission, reverse above procedure.

Transmission Engaged

Transmission Disengaged

NOTE: To protect hood from damage

when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recom- mended by and comply with specifications

of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous.

Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Unthread and remove oil fill cap/ dipstick; wipe oil off. Reinsert the dip- stick into the tube and rest oil fill cap on the tube. Do not thread the cap onto the tube. Remove and read oil level. If

necessary, add oil until "FULl" mark on dipstick is reached. Do not overfill.

*For cold weather operation you should

change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual).

,To change engine oil, see the Mainte- nance section in this manual.

ADD GASOLINE

,Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quanti-

ties that can be used within 30 days to

assure

fuel

freshness.

_CAUTION:

Wipe

off any spilled oil or

fuel. Do not store, spill or use gasoline

near an

open

flame.

 

IMPORTANT:

When

operating in tempera-

tures below 32°F(0°C), use fresh, clean

winter grade gasoline to help insure good cold weather starting.

CAUTION: Alcohol blended fuels (called gasohoJ or using ethanol or methanol) can attract moisture which leads to separa- tion and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for

13 additi°nal information.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Crrftsmrh Limited Warranty on Battery Limited Warrantyon Craftsmanriding EquipmentGeneral Operation II. Slope Operation Service Safe Handling of GasolineIV. Towing General Service Repair Protection Sears Installation ServiceFor prices and additional information call 1=800=827=6655 Adjust Seat Check BatteryTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness ChecklistALL Belts Check Brake SystemWill result in death or serious injury @@@@Know Your Tractor Stopping HOW to USE Your TractorParking MoveUsing the Reverse Operation System To Adjust Gauge WheelsTo Operate Mower To Operate on Hills To TransportTransmission Disengaged Towing Carts and Other ATTACH- MentsAutomatic Transmission Warm UP To Start EngineMowing Tips General Recommendations AsyoucompleteCheck Operator Presence System Engine Lubrication To Change Engine OILTo Service Cartridge To Service PRE-CLEANERClean AIR Screen Clean AIR INTAKE/COOLING AreasMuffler CleaningSpark Plugs IN-LINE Fuel FilterTractor Vice or AdjustmentsRemove Mower SIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment Both Front Plate Links Must be Equal in Length To Replace Mower Drive BeltMower Drive Belt Removal Reinstall Mower Drive Belt Install NEW Mower Blade Secondary Drive BeltTo Replace Mower Blade Secondary Drive Belt Remove Mower Drive BeltWith parking To Start Engine with a Weak BAT- Tery Replacing BatteryTo Attach Jumper Cables To Replace Headlight Bulb To Adjust Throttle Control CableTo Replace Fuse To Remove Hood and Grill AS- SemblyTo Adjust Choke Control Preliminary SettingTo Adjust Carburetor Final SettingEngine OIL Fuel SystemCylinders OtherLoss Power ProblemWill not Clicks butVibration Problem CauseEngine dies whet tractor is shifted Operator leaves seat with Attach merit Clutch engagedDischarge ProblemcauseWorking Loss of driveTractor = = Model Number SchematicTractor = = Model Number Electrical DESCRiPTiON Electrical KEY PartTractor = = Model Number 917.275900 Chassis and Enclosures KEY Part Tractor = = Model Number 917.275900 Chassis and EnclosuresGround Drive Tractor . . Model Number Part Tractor - Model Number Ground DriveDescription Tractor = = Model Number Description Tractor - Model Number Tractor = = Model Number Seat Assembly KEY Part DecalsTractor - Model Number LiFT AssemblyMower Deck Number 111111 Tractor = = Model Cylinder Head Valve and Breather HEAD/VALVE/BR Eath ER ENGINE=MODELCrankcase KEY ITO AiR INTAKE/FILTRATION Kohler ENGINE=MODEL Number CV730, Type Number OiL PAN/LUBRICATION Tractor -- Model NumberKohler ENGINE=MODEL Number CV730, Type Number Fuel System Exhaust KEY PartPage Not Across Hill Only Ride UP and Down HillDegrees MAX 800LE.FOYERMC Iiiiiii!iii ,YourHome....iHiiiilHiiiHiHi

917.2759 specifications

The Craftsman 917.2759 is a powerful lawn tractor designed for homeowners seeking efficiency and reliability in maintaining their lawns. This robust riding mower features a 42-inch cutting deck, which allows for a wide cutting path, ensuring that mowing tasks are completed swiftly. With a 19.5 horsepower Briggs & Stratton engine, the Craftsman 917.2759 delivers adequate power for various mowing conditions, from flat terrains to slightly hilly landscapes.

One of the key features of this tractor is its automatic transmission, which allows for smooth and effortless speed adjustments. Users can easily transition between forward and reverse without the hassle of shifting gears manually. This makes maneuvering around trees, flower beds, and other obstacles much simpler. The tractor also boasts a comfortable high-back seat, providing ample support during long mowing sessions.

Technologically advanced, the Craftsman 917.2759 includes a debris management system that prevents grass clippings from clogging the cutting deck. With its side discharge feature, the mower efficiently expels clippings to the side, promoting a cleaner mowing experience. For those who prefer to collect clippings, optional bagging systems are available, further enhancing the mower's versatility.

In terms of durability, the Craftsman 917.2759 is built with a heavy-duty steel frame and a reinforced cutting deck, ensuring it can withstand the wear and tear of regular use. The tire design offers excellent traction on various terrains, contributing to seamless movement across the lawn.

Another noteworthy characteristic of this tractor is its ease of maintenance. The placement of the engine and battery allows for straightforward access, making it convenient for users to perform routine checks. Additionally, the mower supports various attachments, making it adaptable for different gardening tasks, such as leaf collection, snow removal, and aeration.

Overall, the Craftsman 917.2759 is an excellent choice for homeowners looking for a reliable, feature-rich lawn tractor that can tackle various mowing tasks effectively. Its combination of power, comfort, and innovative technologies positions it as a valuable tool for maintaining a beautiful and healthy lawn.
Top Page Image Contents