Craftsman 917.27624 FRONT-TO-BACK Adjustment, Both Front Plate Links Must be Equal in Length

Page 24

If adjustment is necessary, make adjust- ment on one side of mower only.

To raise one side of mower, tighten lift link adjustment nut on that side.

To lower one side of mower, loosen lift

link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

Recheck measurements after adjusting.

Bottom

Edge of

Bottom Edge of

Mower

to Ground

Mower to Ground

Suspension

-- ____\_

........ _ift Link

 

Adjustment

_-_-

Nut

FRONT-TO-BACK ADJUSTMENT

IMPORTANT: Deck must be level side- to-side. If the following front-to-back adjustment is necessary, be sure to adjust both front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the

front tip is approximately 1/8" to 1/2" lower than the rear tip when the mower is in its

ghest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

Check adjustment on right side of tractor. Position any blade so the tip is pointing straight forward. Measure distance "B" at front and rear tip of blade

Before making any necessary adjust- ments, check that both front plate links are equal in length.

If links are not equal in length, adjust one link to same length as other link.

To lower front of blade, loosen nut "C" on

both front links an equal number of turns. NOTE: Each full turn of nut "C" will

change distance "B" by approximately 3/16".

When distance "B" is 1/8" to 1/2" lower

at front than rear, tighten nut "D" against trunnion on both front links.

To raise front of blade, loosen nut "D" from trunnion on both front links.

Tighten nut "C" on both front links an equal number of turns. The two front links must remain equal in length.

When distance "B" is 1/8" to 1/2" lower

at front than rear, tighten nut "D" against trunnion on both front links.

Recheck side-to-side adjustment.

_°o\_ I oo/ Blade

BOTH FRONT PLATE LINKS MUST BE

EQUAL IN LENGTH

Front Plate Trunnion

Assembly

TO REPLACE MOWER DRIVE BELT

MOWER DRIVE BELT REMOVAL

1.Park tractor on a level surface. Engage parking brake.

2.Lower attachment lift lever to its lowest position.

3.Disengage belt tension rod from lock bracket.

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and re- lease slowly.

4.Remove screws from R.H. and L.H. mandrel covers and remove covers.

5.Remove any dirt or grass clippings which may have accumulated around

mandrels and entire upper deck sur- face.

6.Remove belt from electric clutch pulley, both mandrel pulleys and all idler pul- leys.

MOWER DRIVE BELT INSTALLATION

1.Install belt around both mandrel pul- leys and around idler pulleys as shown.

2.Install belt onto electric clutch pulley.

24

Image 24
Contents Crrftsmiin Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation Service III. ChildrenIV. Towing Safe Handling of GasolineGeneral Service Product Repair Protection AgreementsSteering Wheel To Remove Tractor from Carton To Drive Tractor OFF Skid See Operation section for location Connect Rear Pins Install Mower and Drive BeltAssemble Gauge Wheels to Mower Deck Attach Front PlateChecklist Check Mower LevelnessCheck Brake System Automatic Models only Know Your Tractor TractorROS on HOW to USE Your Tractor To SET Parking BrakeStopping To Move Forward and BackwardUsing the Reverse Operation System To Operate MowerTo Stop Mower Blades To Operate on Hills To TransportTowing Carts and Other ATTACH- Ments Before Starting the Engine Check Engine OIL LevelTo Start Engine Automatic Transmission Warm UPPurge Transmission TransportMowing Tips Lubrication Chart Before Each USEGeneral Recommendations Blade Removal To Sharpen BladeBattery EngineTransaxle Cooling BeltsClean AIR Screen CleaningEngine OIL Filter MufflerTo Install Mower To Level Mower HousingSIDE-TO-SIDE Adjustment To Remove MowerFRONT-TO-BACK Adjustment Mower Drive Belt InstallationBoth Front Plate Links Must be Equal in Length To Replace Mower Drive BeltTo Adjust Attachment Clutch To Check and Adjust BrakeTo Adjust Brake To Check BrakeTo Adjust Steering Wheel Align Ment To Replace Motion Drive BeltTo Start Engine with a Weak BAT To Remove Wheel for RepairsReplacing Battery To Adjust Choke Control To Adjust CarburetorPreliminary Setting Final SettingEngine OIL CylindersOther Troubleshooting Chart StartProblem Cause ROSCorrection Problem Cause Correction Not rotateSchematic Tractor --MODEL NumberTractor --MODEL Number Electrical Electrical KEY Part DescriptionTractor --MODEL Number Chassis and Enclosures 148 164655 Extrusion Bumpers 179716X428 Tractor --MODEL Number Ground Drive LH VGT Steering KEY Part NO. NO.DESCRIPTION Engine Spark Arrester KIT J Tractor --MODEL Number Seat Assembly KEY PartKEY Part NO. NO. DescriptionWheels and Tires DecalsLift Assembly Tractor --MODEL Number Mower Deck KEY Part NO. NO.DESCRIPTION Tractor --MODEL Number TRANSAXLE--MODEL Number Bushing .50X .60X Ylinder HEAD, Valve and Breatherj HEAD/VALVE/BREATHER DescriptionCrankcase KEY Part NO. no KEY Part NO. noIGNITION/ELECTRICALJ Blower Housing and Baffles Blower Housing KEY Part NO. no AIR INTAKE/FILTRATIONIGNITION/ELECTRICAL KEY Part Description Notillustrated 24-096-85-SStarting System J Engine Controls J OIL PAN / Lubrication Description Starting SystemOIL PAN/LUBRICATION KEY Part Description Fuel Systemj Crankshaft Exhaust JFuel System Crankshaft KEY Part DescriptionPage Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXIiiiiiiiiiiiiiiii

917.27624 specifications

The Craftsman 917.27624 is a robust lawn tractor designed for homeowners seeking efficiency, performance, and reliability in their lawn care routine. With a powerful engine and innovative features, this model stands out among its peers in the gardening equipment market.

At the heart of the Craftsman 917.27624 is a 19 horsepower Briggs & Stratton engine, which provides ample power for various lawn care tasks. The engine's reliable performance ensures that users can tackle tough grass conditions and maintain their lawns without interruption. Coupled with a 42-inch cutting deck, this lawn tractor is capable of delivering a precise and clean cut, making it ideal for medium to large-sized yards.

One standout feature of the Craftsman 917.27624 is its advanced transmission system. It comes equipped with a hydrostatic transmission, allowing for smooth acceleration and effortless operation. This system eliminates the hassle of shifting gears, enabling users to focus on mowing without distractions. The adjustable cutting height, offering six different settings, adds versatility to the mowing experience, allowing users to customize their cut according to their lawn's needs.

In terms of comfort, the Craftsman 917.27624 does not fall short. It features a plush, adjustable high-back seat designed to provide maximum support during longer mowing sessions. The steering wheel is ergonomically designed, allowing for responsive handling and maneuverability, making it easier to navigate around tight spaces and landscaping features.

The Craftsman 917.27624 is also equipped with innovative safety features, including an automatic shut-off mechanism that activates when the operator leaves the seat. This feature enhances safety while operating the equipment and prevents accidents caused by unintended movement.

Additionally, this model includes a debris shield and optimized airflow technology that enhances grass collection efficiency. These features ensure that clippings are neatly collected, helping keep the lawn appearance tidy and preventing the buildup of organic matter that can harm grass health.

Overall, the Craftsman 917.27624 is an excellent choice for homeowners who require a reliable lawn tractor with power, comfort, and advanced features for efficient lawn maintenance. Whether mowing, mulching, or towing attachments, this lawn tractor delivers outstanding performance suited to meet diverse lawn care needs.