Craftsman 917.27624 owner manual To Drive Tractor OFF Skid See Operation section for location

Page 9

3.Place seaton seat pan so head of shoulderbolt is positionedover large slotted holein pan.

4.Push downon seat to engage shoulder bolt in slot and pull seattowardsrear of tractor.

5.Pivotseat and pan forwardand as- sembleadjustmentknoband flat washerloosely.Do not tighten.

6.Lowerseatinto operatingpositionand sit in seat.

7.Slideseat until a comfortableposition is reachedwhich allowsyou to press clutch/brakepedal all the way down.

8.Get off seat withoutmovingits ad- justed position.

9.Raiseseat and tighten adjustment knob securely.

Seat

Seat

Bolt

Flat Wa _e._

TO DRIVE TRACTOR OFF SKID (See

Operation section for location and

function of controls)

_WARNING: Before starting, read, un- derstand and follow all instructions in the

Operation section of this manual. Be sure

tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Place freewheel control in "trans- mission engaged" position (see "TO

TRANSPORT" in Operation section of this manual).

4.Sit on seat in operating position, de-

press brake pedal and set the parking brake.

5.Press lift lever plunger and raise

attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Release parking brake.

8.Slowly move the motion control lever forward and slowly drive tractor off skid.

9.Apply brake to stop tractor and set parking brake.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

Adj, Knob _

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See

Operation section for location and

function of controls)

1.Press lift lever plunger and raise

attachment lift lever to its highest po- sition.

2.Release parking brake by depressing brake pedal.

3.Place freewheel control in disengaged position to disengage transmission

(See "TO TRANSPORT" in the Op-

eration section of this manual).

4.Roll tractor forward off skid.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Crrftsmiin Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentGeneral Operation III. Children ServiceIV. Towing Safe Handling of GasolineGeneral Service Repair Protection Agreements ProductSteering Wheel To Remove Tractor from Carton To Drive Tractor OFF Skid See Operation section for location Install Mower and Drive Belt Connect Rear PinsAssemble Gauge Wheels to Mower Deck Attach Front PlateChecklist Check Mower LevelnessCheck Brake System Automatic Models only Know Your Tractor TractorROS on To SET Parking Brake HOW to USE Your TractorStopping To Move Forward and BackwardUsing the Reverse Operation System To Operate MowerTo Stop Mower Blades To Transport To Operate on HillsTowing Carts and Other ATTACH- Ments Before Starting the Engine Check Engine OIL LevelAutomatic Transmission Warm UP To Start EnginePurge Transmission TransportMowing Tips Lubrication Chart Before Each USEGeneral Recommendations To Sharpen Blade Blade RemovalEngine BatteryTransaxle Cooling BeltsCleaning Clean AIR ScreenEngine OIL Filter MufflerTo Level Mower Housing To Install MowerSIDE-TO-SIDE Adjustment To Remove MowerMower Drive Belt Installation FRONT-TO-BACK AdjustmentBoth Front Plate Links Must be Equal in Length To Replace Mower Drive BeltTo Check and Adjust Brake To Adjust Attachment ClutchTo Adjust Brake To Check BrakeTo Replace Motion Drive Belt To Adjust Steering Wheel Align MentTo Start Engine with a Weak BAT To Remove Wheel for RepairsReplacing Battery To Adjust Carburetor To Adjust Choke ControlPreliminary Setting Final SettingEngine OIL CylindersOther Start Troubleshooting ChartProblem Cause ROSCorrection Not rotate Problem Cause CorrectionTractor --MODEL Number SchematicTractor --MODEL Number Electrical KEY Part Description ElectricalTractor --MODEL Number Chassis and Enclosures 148 164655 Extrusion Bumpers 179716X428 Tractor --MODEL Number Ground Drive LH VGT Steering KEY Part NO. NO.DESCRIPTION Engine Spark Arrester KIT J KEY Part Tractor --MODEL Number Seat AssemblyKEY Part NO. NO. DescriptionDecals Wheels and TiresLift Assembly Tractor --MODEL Number Mower Deck KEY Part NO. NO.DESCRIPTION Tractor --MODEL Number TRANSAXLE--MODEL Number Bushing .50X .60X Ylinder HEAD, Valve and Breatherj Description HEAD/VALVE/BREATHERCrankcase KEY Part NO. no KEY Part NO. noIGNITION/ELECTRICALJ Blower Housing and Baffles AIR INTAKE/FILTRATION Blower Housing KEY Part NO. noIGNITION/ELECTRICAL KEY Part Description Notillustrated 24-096-85-SStarting System J Engine Controls J OIL PAN / Lubrication Description Starting SystemOIL PAN/LUBRICATION KEY Part Description Crankshaft Exhaust J Fuel SystemjCrankshaft KEY Part Description Fuel SystemPage Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationIiiiiiiiiiiiiiiii

917.27624 specifications

The Craftsman 917.27624 is a robust lawn tractor designed for homeowners seeking efficiency, performance, and reliability in their lawn care routine. With a powerful engine and innovative features, this model stands out among its peers in the gardening equipment market.

At the heart of the Craftsman 917.27624 is a 19 horsepower Briggs & Stratton engine, which provides ample power for various lawn care tasks. The engine's reliable performance ensures that users can tackle tough grass conditions and maintain their lawns without interruption. Coupled with a 42-inch cutting deck, this lawn tractor is capable of delivering a precise and clean cut, making it ideal for medium to large-sized yards.

One standout feature of the Craftsman 917.27624 is its advanced transmission system. It comes equipped with a hydrostatic transmission, allowing for smooth acceleration and effortless operation. This system eliminates the hassle of shifting gears, enabling users to focus on mowing without distractions. The adjustable cutting height, offering six different settings, adds versatility to the mowing experience, allowing users to customize their cut according to their lawn's needs.

In terms of comfort, the Craftsman 917.27624 does not fall short. It features a plush, adjustable high-back seat designed to provide maximum support during longer mowing sessions. The steering wheel is ergonomically designed, allowing for responsive handling and maneuverability, making it easier to navigate around tight spaces and landscaping features.

The Craftsman 917.27624 is also equipped with innovative safety features, including an automatic shut-off mechanism that activates when the operator leaves the seat. This feature enhances safety while operating the equipment and prevents accidents caused by unintended movement.

Additionally, this model includes a debris shield and optimized airflow technology that enhances grass collection efficiency. These features ensure that clippings are neatly collected, helping keep the lawn appearance tidy and preventing the buildup of organic matter that can harm grass health.

Overall, the Craftsman 917.27624 is an excellent choice for homeowners who require a reliable lawn tractor with power, comfort, and advanced features for efficient lawn maintenance. Whether mowing, mulching, or towing attachments, this lawn tractor delivers outstanding performance suited to meet diverse lawn care needs.
Top Page Image Contents