Craftsman 917.27624 owner manual Engine OIL, Cylinders, Other

Page 29

Immediately prepare your tractor for stor- age at the end of the season or if the trac- tor will not be used for 30 days or more.

_WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See "CLEANING"

in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected

and battery cleaned thoroughly (see "TO

CLEAN BATTERY AND TERMINALS" in the Maintenance section of this manual).

After cleaning, leave cables discon- nected and place cables where they

cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol

blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the car-

buretor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark plug hole(s) into cylinder(s).

3.Turn ignition key to start position for a few seconds to distribute oil.

4.Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors

and cover it to give protection from dust and dirt.

Cover your tractor with a suitable pro- tective cover that does not retain mois- ture. Do not use plastic. Plastic cannot

breathe which allows condensation to

form and will cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

29

Image 29
Contents Crrftsmiin Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentGeneral Operation III. Children ServiceIV. Towing Safe Handling of GasolineGeneral Service Repair Protection Agreements ProductSteering Wheel To Remove Tractor from Carton To Drive Tractor OFF Skid See Operation section for location Install Mower and Drive Belt Connect Rear PinsAssemble Gauge Wheels to Mower Deck Attach Front PlateCheck Brake System ChecklistCheck Mower Levelness Automatic Models only ROS on Know Your TractorTractor To SET Parking Brake HOW to USE Your TractorStopping To Move Forward and BackwardTo Stop Mower Blades Using the Reverse Operation SystemTo Operate Mower To Transport To Operate on HillsTowing Carts and Other ATTACH- Ments Before Starting the Engine Check Engine OIL LevelAutomatic Transmission Warm UP To Start EngineMowing Tips Purge TransmissionTransport General Recommendations Lubrication ChartBefore Each USE To Sharpen Blade Blade RemovalEngine BatteryTransaxle Cooling BeltsCleaning Clean AIR ScreenEngine OIL Filter MufflerTo Level Mower Housing To Install MowerSIDE-TO-SIDE Adjustment To Remove MowerMower Drive Belt Installation FRONT-TO-BACK AdjustmentBoth Front Plate Links Must be Equal in Length To Replace Mower Drive BeltTo Check and Adjust Brake To Adjust Attachment ClutchTo Adjust Brake To Check BrakeTo Replace Motion Drive Belt To Adjust Steering Wheel Align MentTo Start Engine with a Weak BAT To Remove Wheel for RepairsReplacing Battery To Adjust Carburetor To Adjust Choke ControlPreliminary Setting Final SettingOther Engine OILCylinders Start Troubleshooting ChartCorrection Problem CauseROS Not rotate Problem Cause CorrectionTractor --MODEL Number SchematicTractor --MODEL Number Electrical KEY Part Description ElectricalTractor --MODEL Number Chassis and Enclosures 148 164655 Extrusion Bumpers 179716X428 Tractor --MODEL Number Ground Drive LH VGT Steering KEY Part NO. NO.DESCRIPTION Engine Spark Arrester KIT J KEY Part Tractor --MODEL Number Seat AssemblyKEY Part NO. NO. DescriptionDecals Wheels and TiresLift Assembly Tractor --MODEL Number Mower Deck KEY Part NO. NO.DESCRIPTION Tractor --MODEL Number TRANSAXLE--MODEL Number Bushing .50X .60X Ylinder HEAD, Valve and Breatherj Description HEAD/VALVE/BREATHERCrankcase KEY Part NO. no KEY Part NO. noIGNITION/ELECTRICALJ Blower Housing and Baffles AIR INTAKE/FILTRATION Blower Housing KEY Part NO. noIGNITION/ELECTRICAL KEY Part Description Notillustrated 24-096-85-SStarting System J Engine Controls J OIL PAN / Lubrication OIL PAN/LUBRICATION KEY Part Description DescriptionStarting System Crankshaft Exhaust J Fuel SystemjCrankshaft KEY Part Description Fuel SystemPage Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationIiiiiiiiiiiiiiiii

917.27624 specifications

The Craftsman 917.27624 is a robust lawn tractor designed for homeowners seeking efficiency, performance, and reliability in their lawn care routine. With a powerful engine and innovative features, this model stands out among its peers in the gardening equipment market.

At the heart of the Craftsman 917.27624 is a 19 horsepower Briggs & Stratton engine, which provides ample power for various lawn care tasks. The engine's reliable performance ensures that users can tackle tough grass conditions and maintain their lawns without interruption. Coupled with a 42-inch cutting deck, this lawn tractor is capable of delivering a precise and clean cut, making it ideal for medium to large-sized yards.

One standout feature of the Craftsman 917.27624 is its advanced transmission system. It comes equipped with a hydrostatic transmission, allowing for smooth acceleration and effortless operation. This system eliminates the hassle of shifting gears, enabling users to focus on mowing without distractions. The adjustable cutting height, offering six different settings, adds versatility to the mowing experience, allowing users to customize their cut according to their lawn's needs.

In terms of comfort, the Craftsman 917.27624 does not fall short. It features a plush, adjustable high-back seat designed to provide maximum support during longer mowing sessions. The steering wheel is ergonomically designed, allowing for responsive handling and maneuverability, making it easier to navigate around tight spaces and landscaping features.

The Craftsman 917.27624 is also equipped with innovative safety features, including an automatic shut-off mechanism that activates when the operator leaves the seat. This feature enhances safety while operating the equipment and prevents accidents caused by unintended movement.

Additionally, this model includes a debris shield and optimized airflow technology that enhances grass collection efficiency. These features ensure that clippings are neatly collected, helping keep the lawn appearance tidy and preventing the buildup of organic matter that can harm grass health.

Overall, the Craftsman 917.27624 is an excellent choice for homeowners who require a reliable lawn tractor with power, comfort, and advanced features for efficient lawn maintenance. Whether mowing, mulching, or towing attachments, this lawn tractor delivers outstanding performance suited to meet diverse lawn care needs.