Craftsman 917.272057 Howto Useyourtractor, To SET Parking Brake, To USE Throttle Control

Page 13

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage, Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs, We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOWTO USEYOURTRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

1.Depress clutch/brake pedal into full "BRAKE" position and hold.

2.Place parking brake lever in "EN- GAGED" position and release

pressure from clutch/brake pedal, Pedal should remain in "BRAKE"

position. Make sure parking brake will hold tractor secure.

Attachment Clutch Lever "Engaged" Position

Throttle/

Key

Choke

 

•Never use choke to stop engine.

IMPORTANT: Leaving the ignition switch in any position other than "OFF" will cause the battery to be discharged,

(dead).

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when _cpping tractor on grass areas.

AUTION: Always stop tractor completely, as described above, before leaving the operator's position.

TO USE THROTTLE CONTROL

Always operate engine at full throttle.

• Operating engine at less than full

throttle reduces the battery charging

rate.

• Full throttle offers the best bagging and

Brake

Brake led"

rshift

mower performance.

TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the gearshift lever.

1. Start tractor with clutch/brake pedal

Position

Lever

Position

depressed and gearshift lever in

neutral (N) position.

2. Move gearshift lever to desired

position.

STOPPING

MOWER BLADES -

•To stop mower blades,move attach- ment clutch lever to "DISENGAGED"

position.

GROUND DRIVE -

•To stop ground drive, depress clutch/ brake pedal into full "BRAKE" position.

•Move gearshift lever to neutral (N) position.

ENGINE-

•Move throttle control tO slow position.

NOTE: Failure to move throttle control to

slow position to allow engine to idle

before stopping may cause engine to "backfire".

•Turn ignition key to "OFF" position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

3. Slowly release clutch/brake pedal to

start movement.

IMPORTANT: Bring tractor to a complete stop before shifting or changing gears. Failure to do so will shorten the useful life

of your transaxle.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Sears Craftsman Help Line 5 am 5 pro, Mon- Sat Lawn TractorLimited 90 DAY Warranty on Battery MaintenanceSchedule Parts OrderingGeneral Operation II. SlopeDo not Ill. Children IV. ServiceWash hands after handling Repair Agreement Product SpecificationsFilter Pints Filter 3.5 Pints GAPWheel Insert Check Battery Tools Required for AssemblyBefore Removingtractor Attach Steering WheelPlace gearshift lever in neutral N position Install SeatTo Drivetractor OFF Skid See Operation section for location Install Mulcher Plate ChecklistCheck Tire Pressure Check Deck LevelnessH L Lift KnowyourtractorAttachment Clutch Lever Used Parking Brake Lever Locks clutchHowto Useyourtractor To Adjust Mower Cutting HeightTo SET Parking Brake To USE Throttle ControlTo Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportTo Start Engine Before Starting the EngineTowing Carts and Other Attachm Ents Check Engine OIL LevelMulching Mowingtips MOWlNGTIPSBefore Each USE General Recommendations Lubrication ChartTractor PurposeTractor Clean AIR INTAKE/COOLING Areas Clean AIR ScreenBelts Transaxle CoolingSpark Plugs AIR FilterEngine OIL Filter MufflerTo Install Mower CleaningTractor To Remove Mower Mower will be easier to remove fromSIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment Both Front Links Must be Equal LengthTo Replace Mower Blade Drive Belt To Adjust BrakeWith Parking Brake Engaged To Replace Motion Drive BeltTo Start Engine with a Weak Battery Transaxle Gear Shift Lever Neutral AdjustmentTo Adjust Steering Wheel Align Ment Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb Replacing BatteryInterlocks and Relays To Replace FuseTo Adjust Carburetor To Adjust Throttle Control CableEngine Acceleration TestFuel System BatteryEngine OIL CylindersProblemcause Troubleshooting ChartCorrection Excessive Throttle in Choke positionVibration Engine ContinuesProblem Cause TroubleshootingIgnition Switch Tractor -- Model Number SchematicTractor - Model Number Electrical Bolt Hex Hd 1/4-20unc x 3/4 Tractor -- Model Number ElectricalTractor - Model Number 917.272057 Chassis and Enclosures 176554 Tractor --MODEL Number Chassis and Enclosures206 Tractor - Model Number Ground Drive Tractor - Model Number Grounddrive Tractor - Model Number 917.272057 Steering Assembly 139768 SteeringWheel 175131 TRACTOR-- Model Number 917.272057 Steering Assembly32 130465 Sod, Tie Optional Equipment TRACTOR-- Model Number EngineSpark Arrester 137040 Line, FuelKEY Part Tractor - Model Number Seat AssemblyDescription Tractor -- Model Number Decals Decal, Replacement 146046Wheels & Tires KEY Part NO. NO. Description 65139159460 Tractor - Model Number Lift AssemblyMower Deck Tractor - Model NumberKEY Part Description NO. no Tractor -- Model Number Mowerdeck+--0 790079 772147 Transaxle CoverID x.031W 780199Ylinder HEAD, Valve and Breather Valve KEY Part DescriptionExhaust 12-018-01-SAIR Intake J Pinion KEY Part NO. noOIL PAN / Lubrication Includes Kohler ENGINE-MODEL Number CV460, Type NumberCrankshaftexhaust Fuel System 12-041-03-S Page Page Page Suggested Guide for Sighting Slopes for Safe Operation 6aJ.-11 p.m., 7daysaweek Get it fixed, at your home or ours

917.272057 specifications

The Craftsman 917.272057 is a riding lawn mower designed for homeowners who seek an efficient and reliable solution for maintaining their lawns. With its powerful engine and advanced features, it stands out as a versatile tool for lawn care.

One of the main highlights of the Craftsman 917.272057 is its robust 19.5 HP Briggs & Stratton engine. This powerful engine not only provides ample power for cutting grass efficiently but also ensures smooth operation across various terrains. The automatic transmission further enhances the user experience by allowing for seamless speed adjustments without the need for manual shifting.

The mower showcases a cutting deck width of 42 inches, making it suitable for medium to large yards. This size strikes a balance between maneuverability and efficiency, enabling users to cover larger areas while navigating around obstacles such as trees and flower beds. The cutting height can be easily adjusted with a simple lever, allowing users to customize grass length according to their preferences and seasonal needs.

One of the standout features of the Craftsman 917.272057 is its mulching capability. The mower comes equipped with a mulching kit, which allows users to finely chop grass clippings, returning nutrients to the soil. This not only promotes a healthier lawn but also reduces the need for bagging or disposal of clippings.

The construction of the 917.272057 is designed with durability in mind. Its heavy-duty frame and reinforced cutting deck ensure longevity, even when used on varied landscapes. Furthermore, the comfortable high-back seat and easy-to-reach controls enhance operator comfort during longer mowing sessions.

In terms of maintenance, the Craftsman 917.272057 is user-friendly. Accessing the engine and other vital components for routine checks and servicing is straightforward, making it easier for owners to ensure optimal performance throughout the mowing season.

In summary, the Craftsman 917.272057 is a powerful and efficient riding lawn mower equipped with essential features that cater to the diverse needs of lawn care. With a robust engine, adjustable cutting deck, mulching capabilities, and user-friendly design, it offers a comprehensive solution for homeowners seeking an effective way to keep their lawns looking pristine. Whether tackling a small yard or a larger property, this mower combines performance, comfort, and durability, making it a valuable addition to any homeowner's gardening arsenal.
Top Page Image Contents