Craftsman 917.272057 owner manual Tractor

Page 18

TRACTOR

Always observe safety rules when

performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be ad- justed. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble hex bolt, lock washer and flat washer in exact order as

shown.

5.Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: Blade bolt is grade 8 heat treated.

manual).

Trailing E

Star

TIRES

•Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm

rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts

dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the

brake pedal is fully depressed and attachment clutch control is in the

disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

2.Remove hex bolt, lock washer and flat washer securing blade.

3.Install new or resharpened blade with

trailing edge up towards deck as shown.

Edge Up"_ Center

IHole

Flat Washer.

Lock WasherMandrel Assembly

'G_---Hex Bolt (Grade)

*A Grade 8 heat treated bolt can be identified by six lines on the bolt head.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen-

ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual

damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone bal- ancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded

portion of the steel bolt or pin and hold the bolt or pin parallel with the ground.

If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is

balanced. Center Hole J /

5/8" Bo_

 

 

 

or Pin _

 

._.S_-."_.

 

BATTERY

_

"_

Blade

Your tractor has a battery charging

system which is sufficient for normal use. However, periodic charging of the battery

with an automotive charger will extend its 18life.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Lawn Tractor Sears Craftsman Help Line 5 am 5 pro, Mon- SatMaintenanceSchedule Parts Ordering Limited 90 DAY Warranty on BatteryII. Slope General OperationDo not IV. Service Ill. ChildrenWash hands after handling Filter Pints Filter 3.5 Pints Product SpecificationsRepair Agreement GAPWheel Insert Before Removingtractor Tools Required for AssemblyCheck Battery Attach Steering WheelInstall Seat Place gearshift lever in neutral N positionTo Drivetractor OFF Skid See Operation section for location Check Tire Pressure ChecklistInstall Mulcher Plate Check Deck LevelnessH L Attachment Clutch Lever Used KnowyourtractorLift Parking Brake Lever Locks clutchTo SET Parking Brake To Adjust Mower Cutting HeightHowto Useyourtractor To USE Throttle ControlTo Operate on Hills To Adjust Gauge WheelsTo Operate Mower To TransportTowing Carts and Other Attachm Ents Before Starting the EngineTo Start Engine Check Engine OIL LevelMOWlNGTIPS Mulching MowingtipsTractor General Recommendations Lubrication ChartBefore Each USE PurposeTractor Belts Clean AIR ScreenClean AIR INTAKE/COOLING Areas Transaxle CoolingEngine OIL Filter AIR FilterSpark Plugs MufflerTractor To Remove Mower CleaningTo Install Mower Mower will be easier to remove fromFRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment Both Front Links Must be Equal LengthWith Parking Brake Engaged To Adjust BrakeTo Replace Mower Blade Drive Belt To Replace Motion Drive BeltTo Adjust Steering Wheel Align Ment Transaxle Gear Shift Lever Neutral AdjustmentTo Start Engine with a Weak Battery Front Wheel TOE-IN/CAMBERInterlocks and Relays Replacing BatteryTo Replace Headlight Bulb To Replace FuseEngine To Adjust Throttle Control CableTo Adjust Carburetor Acceleration TestEngine OIL BatteryFuel System CylindersTroubleshooting Chart ProblemcauseCorrection Vibration Throttle in Choke positionExcessive Engine ContinuesTroubleshooting Problem CauseTractor -- Model Number Schematic Ignition SwitchTractor - Model Number Electrical Tractor -- Model Number Electrical Bolt Hex Hd 1/4-20unc x 3/4Tractor - Model Number 917.272057 Chassis and Enclosures Tractor --MODEL Number Chassis and Enclosures 176554206 Tractor - Model Number Ground Drive Tractor - Model Number Grounddrive Tractor - Model Number 917.272057 Steering Assembly TRACTOR-- Model Number 917.272057 Steering Assembly 139768 SteeringWheel 17513132 130465 Sod, Tie Spark Arrester TRACTOR-- Model Number EngineOptional Equipment 137040 Line, FuelTractor - Model Number Seat Assembly KEY PartDescription Wheels & Tires KEY Part NO. NO. Description Decal, Replacement 146046Tractor -- Model Number Decals 65139Tractor - Model Number Lift Assembly 159460Tractor - Model Number Mower DeckTractor -- Model Number Mowerdeck KEY Part Description NO. no+--0 ID x.031W 772147 Transaxle Cover790079 780199Ylinder HEAD, Valve and Breather Exhaust KEY Part DescriptionValve 12-018-01-SAIR Intake J KEY Part NO. no PinionOIL PAN / Lubrication Kohler ENGINE-MODEL Number CV460, Type Number IncludesCrankshaftexhaust Fuel System 12-041-03-S Page Page Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ours 6aJ.-11 p.m., 7daysaweek

917.272057 specifications

The Craftsman 917.272057 is a riding lawn mower designed for homeowners who seek an efficient and reliable solution for maintaining their lawns. With its powerful engine and advanced features, it stands out as a versatile tool for lawn care.

One of the main highlights of the Craftsman 917.272057 is its robust 19.5 HP Briggs & Stratton engine. This powerful engine not only provides ample power for cutting grass efficiently but also ensures smooth operation across various terrains. The automatic transmission further enhances the user experience by allowing for seamless speed adjustments without the need for manual shifting.

The mower showcases a cutting deck width of 42 inches, making it suitable for medium to large yards. This size strikes a balance between maneuverability and efficiency, enabling users to cover larger areas while navigating around obstacles such as trees and flower beds. The cutting height can be easily adjusted with a simple lever, allowing users to customize grass length according to their preferences and seasonal needs.

One of the standout features of the Craftsman 917.272057 is its mulching capability. The mower comes equipped with a mulching kit, which allows users to finely chop grass clippings, returning nutrients to the soil. This not only promotes a healthier lawn but also reduces the need for bagging or disposal of clippings.

The construction of the 917.272057 is designed with durability in mind. Its heavy-duty frame and reinforced cutting deck ensure longevity, even when used on varied landscapes. Furthermore, the comfortable high-back seat and easy-to-reach controls enhance operator comfort during longer mowing sessions.

In terms of maintenance, the Craftsman 917.272057 is user-friendly. Accessing the engine and other vital components for routine checks and servicing is straightforward, making it easier for owners to ensure optimal performance throughout the mowing season.

In summary, the Craftsman 917.272057 is a powerful and efficient riding lawn mower equipped with essential features that cater to the diverse needs of lawn care. With a robust engine, adjustable cutting deck, mulching capabilities, and user-friendly design, it offers a comprehensive solution for homeowners seeking an effective way to keep their lawns looking pristine. Whether tackling a small yard or a larger property, this mower combines performance, comfort, and durability, making it a valuable addition to any homeowner's gardening arsenal.
Top Page Image Contents