Craftsman 917.272068 owner manual Problem Cause

Page 31

TROUBLESHOOTING CHART:

See appropriate section in manual unless directed to Sears service center

PROBLEM

CAUSE

 

 

Loss of power

3. Build-up

of grass,

leaves

(continued)

and trash

under

mower.

4.Dirty air filter.

5.Low oil level/dirty oil.

6.Faulty spark plug.

7.Dirty fuel filter.

8.Stale or dirty fuel.

9.Water in fuel.

10.Spark plug wire loose.

11.Dirty engine air screen/fins.

12.Dirty/clogged muffler.

13.Loose or damaged wiring.

14.Carburetor out of adjustment.

15.Engine valves out of adjustment.

Excessive

1.

Worn,

bent

or loose blade.

vibration

 

 

 

 

 

 

 

 

2.

Bent

blade

mandrel.

 

 

3.

Loose/damaged

part(s).

Engine

continues

1.

Faulty

operator-safety

to run when

 

presence control

system.

operator

leaves

 

 

 

 

 

 

seat with

 

 

 

 

 

attachment

 

 

 

 

 

clutch engaged

 

 

 

 

 

CORRECTION

3.Clean underside of mower housing.

4.Clean/replace air filter.

5.Check oil level/change oil.

6.Clean and regap or change spark plug.

7.Replace fuel filter.

8.Drain fuel tank and refill with fresh gasoline.

9.Drain fuel tank and carburetor, refill tank with

fresh gasoline and replace fuel filter.

10.Connect and tighten spark plug wire.

11.Clean engine air screen/ fins.

12. Clean/replace muffler. 13.Check all wiring.

14.See "To Adjust Carburetor"

in Service and Adjustments section.

15.Contact a Sears or other qualified service center.

1.Replace blade.

Tighten blade bolt.

2.Contact a Sears or other

qualified service center.

3.Tighten loose part(s). Replace damaged parts.

1.Check wiring, switches and

connections. If not corrected, contact a Sears or other

qualified service center.

Poor cut - uneven

1.

Worn,

bent

or loose

blade.

 

2. Mower deck not level.

 

3. Buildup of grass, leaves,

 

 

and

trash under

mower.

 

4.

Bent

blade

mandrel.

 

 

.

Clogged

mower

deck

vent

 

 

from build-up of grass,

 

 

leaves,

and

trash

around

 

 

mandrels.

 

 

 

Mower blades wil

1.

Obstruction

in clutch

 

not rotate

 

mechanism.

 

 

 

1.Replace blade. Tighten blade bolt.

2.Level mower deck.

3.Clean underside of mower housing.

4.Contact a Sears or other qualified service center.

5.Clean around mandrels to open vent holes.

1.Remove obstruction.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Sears Craftsman Help Line 5 am 5 pm, Mon- Sat JcrrftsmrniSears Limited 90 DAY Warranty on BatteryGeneral Operation II. Slope OperationIII. Children IV. ServiceDo not Page Repair Agreement Product SpecificationsAPI-SF-SJ RC12YC16-18 Before Removing Tractor from Skid Attach Steering Wheel Tools Required for AssemblyCheck Battery CartonInstall Seat Check Brake System Ixl Freewheel Control Knowyour Tractor Your TractorStopping HOW to USE Your Tractor To SET Parking BrakeThrottle Contr ParkingTo Operate on Hills Gauge Wheel Mountinc LocknutTo Operate Mower DeflectorTo Start Engine Towing Carts and Other ATTACH- MentsBefore Starting the Engine Check Engine OIL Level ADD GasolinePurge Transmission Automatic Transmission Warm UPMulching Mowing Tips Mowing TipsBearing Lubrication ChartGeneral Recommendations Before Each USEOperator Presence System BatteryBrake Operation TiresLubrication EngineTransaxle Cooling Transaxle Pump FluidEngine OIL Filter To Service PRE-CLEANERClean AIR Screen CleaningArms Service or AdjustmentsTo Install Mower To Remove MowerGround To Level Mower HousingRecheck measurements after adjust- ing Mower toIdler Belt InstallationTo Adjust Brake To Replace Mower Blade Drive BeltFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel ALIGN- MentTransaxle Motion Control Lever Neutral Adjustment Transmission REMOVAL/REPLACE- MentInterlocks and Relays To Start Engine with a Weak BatteryReplacing Battery To Replace Headlight BulbTo Adjust Carburetor To Adjust THROnLE Control CableToremovehood and Grill AS Sembly Acceleration Test AdjustingClamp Cylinders OtherFuel System EngineoilCause Correction ProblemProblem Cause Problemcause Tractor - Model Number Schematic Electrical Tractor - Model NumberKEY Part Description Tractor - Model Number ElectricalTractor --MODEL Number Chassis and Enclosures Tractor - Model Number 917.272068 Chassisand Enclosures Tractor --MODEL Number Ground Drive Keeper, Center Span Tractor - Model Number Steering Assembly KEY Part NO. NO,DESCRIPTION Optional Equipment Tractor - Model Number EngineSpark Arrester KEY Part NO. NO. Description Tractor -- Model Number EngineKEY Part Description Tractor --MODELNUMBER Seat AssemblyWheels & Tires DecalsTractor - Model Number Liftassembly Tractor - Model Number Lift Assembly Tractor - Model Number Mower Deck Shaft Assembly, Mandrel, Vented ¢ C 71idx1.15odx.030thk Cylinder HEAD, Valve and Breather Crankcase KEY Part Description AssemblyIGNITION/ELECTRICAL Blower Housing and Bafflesi AIR Intake 12-094-14-S Gasket, air cleanerAIR INTAKE/FILTRATION 12-743-12-SStarting System Engine Controls OIL PAN / Lubrication KEY PAR NO. NO.DESCRIPTION KEY Part NO. NO,DESCRIPTIONKEY Part NO. no Exhaust Inches 1 inch= 25.4 mm DESCRIPrlONPage Page Page Suggested Guide for Sighting Slopes for Safe Operation A. and Canada Your Home

917.272068 specifications

The Craftsman 917.272068 is a highly efficient and robust lawn tractor designed to meet the needs of both homeowners and professional landscapers. Built with durability and performance in mind, this machine is ideal for tackling a variety of mowing tasks, whether you have a small residential lawn or a more expansive grass area.

One of the standout features of the Craftsman 917.272068 is its powerful 24 HP engine, which provides ample power to handle tough mowing conditions. The engine is specifically designed for reliability and longevity, ensuring that it can provide consistent performance over many seasons. Coupled with the dual blade system, the mower provides an even and clean cut, reducing the need for double mowing and optimizing efficiency.

The 917.272068 is equipped with a 42-inch cutting deck, allowing for wide swath mowing while maintaining agility around obstacles. The cutting height is adjustable, providing users with the flexibility to choose from various settings, ensuring a tailored cut to suit the season or grass type. This versatility makes it particularly advantageous for users with varying mowing preferences and lawn conditions.

Another notable feature is the hydrostatic transmission, which allows for smooth and effortless control of speed and direction. This feature enhances ease of use, particularly for those who may not be accustomed to operating larger machinery. The responsive controls enable precise maneuverability, making it possible to navigate tightly spaced areas with ease.

The Craftsman 917.272068 also includes comfortable seating and a user-friendly dashboard that displays essential information at a glance, such as fuel level and maintenance reminders. This focus on operator comfort is a crucial aspect of its design, making long mowing sessions more enjoyable and less fatiguing.

In terms of technology, the Craftsman 917.272068 supports mulching and rear discharge capabilities, providing users with the option to either recycle grass clippings back onto the lawn for nutrient replenishment or easily discharge clippings behind the mower. This dual functionality enhances the utility of the mower, catering to different user preferences and lawn care practices.

Overall, the Craftsman 917.272068 stands out with its fusion of power, efficiency, and user-friendly features. Its reliable performance, combined with adjustable mowing options and comfortable operation, positions it as a top choice for anyone looking to achieve a well-maintained lawn. Whether for residential use or professional landscaping, this lawn tractor is built to deliver excellent results season after season.
Top Page Image Contents