Craftsman 917.272068 owner manual Check Brake System

Page 10

INSTALL MULCHER PLATE

CHECK BRAKE SYSTEM

 

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

Mulcher

DeflectorPlate

Shield

Latch

Hooks

A

CAUTION: Do not remove deflector shield from mower. Raise and hold shield

when attaching mulcher plate and allow it to rest on plate while in operation.

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulching blades are

designed for discharging and bagging also.

CHECK TIRE PRESSURE

The tires on your tractor were ovednflated

at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in

"PRODUCT SPECIFICATIONS" section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing

should be properly leveled. See "TO LEVEL MOWER HOUSING" in the

Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

After you learn how to operate your tractor, check to see that the brake is

properly adjusted. See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual.

el CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this quality product.

Please review the following checklist:

,/ All assembly instructions have been completed.

•/ No remaining loose parts in carton. ,I Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and

tightened securely.

,/All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

,/Be sure mower deck is properly leveled

side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated

for leveling).

,/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

v" Check wiring. See that all connections are still secure and wires are properly clamped.

4 Before driving tractor, be sure freewheel control is in "transmission engaged" position (see "TO TRANSPORT" in the Operation section of this manual).

While learning how to use your tractor, pay

extra attention to the following important items:

•/ Engine oil is at proper level.

,/Fuel tank is filled with fresh, clean,

regular unleaded gasoline.

,/Become familiar with all controls - their

location and function. Operate them before you start the engine.

,/Be sure brake system is in safe operat- ing condition.

,/It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and trans- mission purging instructions (See "TO START ENGINE" and "PURGE TRANS-

MISSION" in the Operation section of this manual).

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Jcrrftsmrni Sears Craftsman Help Line 5 am 5 pm, Mon- SatLimited 90 DAY Warranty on Battery SearsII. Slope Operation General OperationIII. Children IV. ServiceDo not Page RC12YC Product SpecificationsAPI-SF-SJ Repair Agreement16-18 Carton Tools Required for AssemblyCheck Battery Before Removing Tractor from Skid Attach Steering WheelInstall Seat Check Brake System Ixl Knowyour Tractor Your Tractor Freewheel ControlContr Parking HOW to USE Your Tractor To SET Parking BrakeThrottle StoppingDeflector Gauge Wheel Mountinc LocknutTo Operate Mower To Operate on HillsADD Gasoline Towing Carts and Other ATTACH- MentsBefore Starting the Engine Check Engine OIL Level To Start EngineAutomatic Transmission Warm UP Purge TransmissionMowing Tips Mulching Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations BearingTires BatteryBrake Operation Operator Presence SystemTransaxle Pump Fluid EngineTransaxle Cooling LubricationCleaning To Service PRE-CLEANERClean AIR Screen Engine OIL FilterTo Remove Mower Service or AdjustmentsTo Install Mower ArmsMower to To Level Mower HousingRecheck measurements after adjust- ing GroundTo Replace Mower Blade Drive Belt Belt InstallationTo Adjust Brake IdlerTransmission REMOVAL/REPLACE- Ment To Adjust Steering Wheel ALIGN- MentTransaxle Motion Control Lever Neutral Adjustment Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Start Engine with a Weak BatteryReplacing Battery Interlocks and RelaysTo Adjust Carburetor To Adjust THROnLE Control CableToremovehood and Grill AS Sembly Acceleration Test AdjustingClamp Engineoil OtherFuel System CylindersProblem Cause CorrectionProblem Cause Problemcause Tractor - Model Number Schematic Tractor - Model Number ElectricalTractor - Model Number Electrical KEY Part DescriptionTractor --MODEL Number Chassis and Enclosures Tractor - Model Number 917.272068 Chassisand Enclosures Tractor --MODEL Number Ground Drive Keeper, Center Span Tractor - Model Number Steering Assembly KEY Part NO. NO,DESCRIPTION Optional Equipment Tractor - Model Number EngineSpark Arrester Tractor -- Model Number Engine KEY Part NO. NO. DescriptionTractor --MODELNUMBER Seat Assembly KEY Part DescriptionDecals Wheels & TiresTractor - Model Number Liftassembly Tractor - Model Number Lift Assembly Tractor - Model Number Mower Deck Shaft Assembly, Mandrel, Vented ¢ C 71idx1.15odx.030thk Cylinder HEAD, Valve and Breather Assembly Crankcase KEY Part DescriptionIGNITION/ELECTRICAL Blower Housing and Bafflesi AIR Intake 12-743-12-S Gasket, air cleanerAIR INTAKE/FILTRATION 12-094-14-SStarting System Engine Controls OIL PAN / Lubrication KEY PAR NO. NO.DESCRIPTION KEY Part NO. NO,DESCRIPTIONKEY Part NO. no Exhaust DESCRIPrlON Inches 1 inch= 25.4 mmPage Page Page Suggested Guide for Sighting Slopes for Safe Operation Your Home A. and Canada

917.272068 specifications

The Craftsman 917.272068 is a highly efficient and robust lawn tractor designed to meet the needs of both homeowners and professional landscapers. Built with durability and performance in mind, this machine is ideal for tackling a variety of mowing tasks, whether you have a small residential lawn or a more expansive grass area.

One of the standout features of the Craftsman 917.272068 is its powerful 24 HP engine, which provides ample power to handle tough mowing conditions. The engine is specifically designed for reliability and longevity, ensuring that it can provide consistent performance over many seasons. Coupled with the dual blade system, the mower provides an even and clean cut, reducing the need for double mowing and optimizing efficiency.

The 917.272068 is equipped with a 42-inch cutting deck, allowing for wide swath mowing while maintaining agility around obstacles. The cutting height is adjustable, providing users with the flexibility to choose from various settings, ensuring a tailored cut to suit the season or grass type. This versatility makes it particularly advantageous for users with varying mowing preferences and lawn conditions.

Another notable feature is the hydrostatic transmission, which allows for smooth and effortless control of speed and direction. This feature enhances ease of use, particularly for those who may not be accustomed to operating larger machinery. The responsive controls enable precise maneuverability, making it possible to navigate tightly spaced areas with ease.

The Craftsman 917.272068 also includes comfortable seating and a user-friendly dashboard that displays essential information at a glance, such as fuel level and maintenance reminders. This focus on operator comfort is a crucial aspect of its design, making long mowing sessions more enjoyable and less fatiguing.

In terms of technology, the Craftsman 917.272068 supports mulching and rear discharge capabilities, providing users with the option to either recycle grass clippings back onto the lawn for nutrient replenishment or easily discharge clippings behind the mower. This dual functionality enhances the utility of the mower, catering to different user preferences and lawn care practices.

Overall, the Craftsman 917.272068 stands out with its fusion of power, efficiency, and user-friendly features. Its reliable performance, combined with adjustable mowing options and comfortable operation, positions it as a top choice for anyone looking to achieve a well-maintained lawn. Whether for residential use or professional landscaping, this lawn tractor is built to deliver excellent results season after season.
Top Page Image Contents