Craftsman 917.272068 owner manual Problemcause

Page 32

TROUBLESHOOTING CHART:

See appropriate section in manual unless directed to Sears service center

PROBLEMCAUSE

Mower blades will 2.

Worn/damaged

mower

not rotate (con't)

drive belt.

 

3.

Frozen

idler pulley.

4.

Frozen

blade

mandrel.

Poor grass1. Engine speed too slow. discharge

2.Travel speed too fast.

3.Wet grass.

4.Mower deck not level.

5.Low/uneven tire air pressure

6.Worn, bent or loose blade.

7.Buildup of grass, leaves and trash under mower.

8.Mower drive belt worn.

9.Blades improperly installed.

10.Improper blades used.

11 .Clogged mower deck vent

holes from buildup of grass, leaves, and trash around mandrels.

CORRECTION

2.Replace mower drive belt.

3.Replace idler pulley.

,4. Contact aSears or other qualified service center.

1.Place throttle control in "FAST" position.

2.Shift to slower speed.

3.Allow grass to dry before mowing.

4.Level mower deck.

5.Check tires for proper air pressure.

6.Replace/sharpen blade. Tighten blade bolt.

7.Clean underside of mower housing.

8.Replace mower drive belt.

9.Reinstall blades sharp edge down.

10.Replace with blades listed in this manual.

1.Clean around mandrels to open vent holes.

Headlight(s) not working

(if so equipped)

Battery will not charge

Loss of drive

1.Switch is "OFF".

2.Bulb(s) or lamp(s) burned out

3.Faulty light switch.

4.Loose or damaged wiring.

5.Blown fuse.

1.Bad battery cell(s).

2.Poor cable connections.

3.Faulty regulator (if so equipped).

4.Faulty alternator.

1.Freewheel control in

"disengaged" position.

2.Motion drive belt worn, damaged, or broken.

3.Air trapped in transmission during shipment or servicing.

1.Turn switch "ON".

2.Replace bulb(s) or lamp(s).

3.Check/replace light switch.

4.Check wiring and connec- tions.

5.Replace fuse.

1.Replace battery.

2.Check/clean all connec- tions.

3.Replace regulator.

4.Replace alternator.

1.Place freewheel control in

"engaged" position.

2.Replace motion drive belt.

3.Purge transmission.

Engine "backfires" when turning

engine "OFF"

.

Engine

throttle

control not

. Move throttle control

to

 

set at "SLOW"

 

"SLOW"

position and

allow

 

position

for 30

seconds

 

to idle for 30 seconds

before

 

before

stopping

engine.

stopping

engine.

 

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Jcrrftsmrni Sears Craftsman Help Line 5 am 5 pm, Mon- SatLimited 90 DAY Warranty on Battery SearsII. Slope Operation General OperationDo not IV. ServiceIII. Children Page Product Specifications API-SF-SJRC12YC Repair Agreement16-18 Tools Required for Assembly Check BatteryCarton Before Removing Tractor from Skid Attach Steering WheelInstall Seat Check Brake System Ixl Knowyour Tractor Your Tractor Freewheel ControlHOW to USE Your Tractor To SET Parking Brake ThrottleContr Parking StoppingGauge Wheel Mountinc Locknut To Operate MowerDeflector To Operate on HillsTowing Carts and Other ATTACH- Ments Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start EngineAutomatic Transmission Warm UP Purge TransmissionMowing Tips Mulching Mowing TipsLubrication Chart General RecommendationsBefore Each USE BearingBattery Brake OperationTires Operator Presence SystemEngine Transaxle CoolingTransaxle Pump Fluid LubricationTo Service PRE-CLEANER Clean AIR ScreenCleaning Engine OIL FilterService or Adjustments To Install MowerTo Remove Mower ArmsTo Level Mower Housing Recheck measurements after adjust- ingMower to GroundBelt Installation To Adjust BrakeTo Replace Mower Blade Drive Belt IdlerTo Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control Lever Neutral AdjustmentTransmission REMOVAL/REPLACE- Ment Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysToremovehood and Grill AS Sembly To Adjust THROnLE Control CableTo Adjust Carburetor Clamp AdjustingAcceleration Test Other Fuel SystemEngineoil CylindersProblem Cause CorrectionProblem Cause Problemcause Tractor - Model Number Schematic Tractor - Model Number ElectricalTractor - Model Number Electrical KEY Part DescriptionTractor --MODEL Number Chassis and Enclosures Tractor - Model Number 917.272068 Chassisand Enclosures Tractor --MODEL Number Ground Drive Keeper, Center Span Tractor - Model Number Steering Assembly KEY Part NO. NO,DESCRIPTION Spark Arrester Tractor - Model Number EngineOptional Equipment Tractor -- Model Number Engine KEY Part NO. NO. DescriptionTractor --MODELNUMBER Seat Assembly KEY Part DescriptionDecals Wheels & TiresTractor - Model Number Liftassembly Tractor - Model Number Lift Assembly Tractor - Model Number Mower Deck Shaft Assembly, Mandrel, Vented ¢ C 71idx1.15odx.030thk Cylinder HEAD, Valve and Breather Assembly Crankcase KEY Part DescriptionIGNITION/ELECTRICAL Blower Housing and Bafflesi AIR Intake Gasket, air cleaner AIR INTAKE/FILTRATION12-743-12-S 12-094-14-SStarting System Engine Controls OIL PAN / Lubrication KEY Part NO. no KEY Part NO. NO,DESCRIPTIONKEY PAR NO. NO.DESCRIPTION Exhaust DESCRIPrlON Inches 1 inch= 25.4 mmPage Page Page Suggested Guide for Sighting Slopes for Safe Operation Your Home A. and Canada

917.272068 specifications

The Craftsman 917.272068 is a highly efficient and robust lawn tractor designed to meet the needs of both homeowners and professional landscapers. Built with durability and performance in mind, this machine is ideal for tackling a variety of mowing tasks, whether you have a small residential lawn or a more expansive grass area.

One of the standout features of the Craftsman 917.272068 is its powerful 24 HP engine, which provides ample power to handle tough mowing conditions. The engine is specifically designed for reliability and longevity, ensuring that it can provide consistent performance over many seasons. Coupled with the dual blade system, the mower provides an even and clean cut, reducing the need for double mowing and optimizing efficiency.

The 917.272068 is equipped with a 42-inch cutting deck, allowing for wide swath mowing while maintaining agility around obstacles. The cutting height is adjustable, providing users with the flexibility to choose from various settings, ensuring a tailored cut to suit the season or grass type. This versatility makes it particularly advantageous for users with varying mowing preferences and lawn conditions.

Another notable feature is the hydrostatic transmission, which allows for smooth and effortless control of speed and direction. This feature enhances ease of use, particularly for those who may not be accustomed to operating larger machinery. The responsive controls enable precise maneuverability, making it possible to navigate tightly spaced areas with ease.

The Craftsman 917.272068 also includes comfortable seating and a user-friendly dashboard that displays essential information at a glance, such as fuel level and maintenance reminders. This focus on operator comfort is a crucial aspect of its design, making long mowing sessions more enjoyable and less fatiguing.

In terms of technology, the Craftsman 917.272068 supports mulching and rear discharge capabilities, providing users with the option to either recycle grass clippings back onto the lawn for nutrient replenishment or easily discharge clippings behind the mower. This dual functionality enhances the utility of the mower, catering to different user preferences and lawn care practices.

Overall, the Craftsman 917.272068 stands out with its fusion of power, efficiency, and user-friendly features. Its reliable performance, combined with adjustable mowing options and comfortable operation, positions it as a top choice for anyone looking to achieve a well-maintained lawn. Whether for residential use or professional landscaping, this lawn tractor is built to deliver excellent results season after season.
Top Page Image Contents