To Level Mower Housing, Mower to, Ground

Craftsman 917.272068 To Level Mower Housing, Recheck measurements after adjust- ing, Mower to

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway, Make sure

tires are properly inflated (See "PROD- UCT SPECIFICATIONS" section of this

manual). If tires are over or underinflated, you will not properly

adjust your mower.

SIDE-TO-SIDE ADJUSTMENT

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of

mower to ground. Distance "A" on both sides of mower should be the

same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjust- ing.

Bottom	edge of		Bottom edge of
mower to		_	mower to
ground	_		ground
	A_ _""_ Ground		Line _"")" -_A

Arm

Lift Link _n

Adjustment Nut

FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level side-to side. If the following front-to-back adjustment is necessary, be sure to adjust both front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

Check adjustment on right side of tractor. Measure distance "D" directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjust- ments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut "E" on both front links an equal number of turns.

•When distance "D" is 1/8" to 1/2" lower at front than rear, tighten nuts "P against trunnion on both front links.

•To raise front of mower, loosen nut "P from trunnion on both front links.

Tighten nut "E" on both front links an equal number of turns.

•When distance "D" is 1/8" to 1/2" lower at front than rear, tighten nut "P against trunnion on both front links.

•Recheck side-to-side adjustment.

Both Front Links Should be Equal in Length

"E"

Trunni

Front Links

917.272068 specifications

The Craftsman 917.272068 is a highly efficient and robust lawn tractor designed to meet the needs of both homeowners and professional landscapers. Built with durability and performance in mind, this machine is ideal for tackling a variety of mowing tasks, whether you have a small residential lawn or a more expansive grass area.

One of the standout features of the Craftsman 917.272068 is its powerful 24 HP engine, which provides ample power to handle tough mowing conditions. The engine is specifically designed for reliability and longevity, ensuring that it can provide consistent performance over many seasons. Coupled with the dual blade system, the mower provides an even and clean cut, reducing the need for double mowing and optimizing efficiency.

The 917.272068 is equipped with a 42-inch cutting deck, allowing for wide swath mowing while maintaining agility around obstacles. The cutting height is adjustable, providing users with the flexibility to choose from various settings, ensuring a tailored cut to suit the season or grass type. This versatility makes it particularly advantageous for users with varying mowing preferences and lawn conditions.

Another notable feature is the hydrostatic transmission, which allows for smooth and effortless control of speed and direction. This feature enhances ease of use, particularly for those who may not be accustomed to operating larger machinery. The responsive controls enable precise maneuverability, making it possible to navigate tightly spaced areas with ease.

The Craftsman 917.272068 also includes comfortable seating and a user-friendly dashboard that displays essential information at a glance, such as fuel level and maintenance reminders. This focus on operator comfort is a crucial aspect of its design, making long mowing sessions more enjoyable and less fatiguing.

In terms of technology, the Craftsman 917.272068 supports mulching and rear discharge capabilities, providing users with the option to either recycle grass clippings back onto the lawn for nutrient replenishment or easily discharge clippings behind the mower. This dual functionality enhances the utility of the mower, catering to different user preferences and lawn care practices.

Overall, the Craftsman 917.272068 stands out with its fusion of power, efficiency, and user-friendly features. Its reliable performance, combined with adjustable mowing options and comfortable operation, positions it as a top choice for anyone looking to achieve a well-maintained lawn. Whether for residential use or professional landscaping, this lawn tractor is built to deliver excellent results season after season.