To Adjust Gauge Wheels, To Operate Mower

Craftsman 917.27242 To Adjust Gauge Wheels, To Operate Mower, To Operate on Hills, To Transport

•The average lawn should be cut to

approximately 2.1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better tooking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper

position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

1.Adjust mower to desired cutting height (See TO ADJUST MOWER CUTTING HEIGHT" in the Operation section of this manual).

2.With mower in desired height of cut position, gauge wheels should be

assembled so they are slightly off the ground, Install gauge wheel in appropriate hote with shoulder bolt, 3/8 washer, and 3/8-16 Iocknut and tighten securely.

3.Repeat for opposite side installing gauge wheel in same adjustment hole.

Gauge Wheel

Bracket

3/8-16

3/8Shoulder

Gaug_

TO OPERATE MOWER

Your tractor is equipped with an operator

presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

1.Select desired height of cut.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

,_ CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place,

Attachment Clutch	Attachemnt
Position	LiftLever High
Position
	Low

"Disengaged"

Position

Shield

TO OPERATE ON HILLS

_CAUT/ON:

Do not drive up or down

hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills,

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to

brake position and engage parking brake.

•Move motion control lever to neutral (N)

position. ,

IMPORTANT= The motion control lever does not return to neutral (N) position

when the clutch/brake pedal is de- pressed.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Slowly move motion control lever to slowest setting.

•Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

1.Raise attachment lift to highest position with attachment lift control.

2.Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

917.27242 specifications

The Craftsman 917.27242 is a high-performance riding lawn mower that delivers the power and precision needed for effective lawn maintenance. Designed for efficiency and ease of use, this model is ideal for homeowners with medium to large-sized lawns.

One of the standout features of the Craftsman 917.27242 is its robust 24 HP Kohler engine. This powerful engine ensures reliable starting and strong performance, making mowing tasks quicker and more efficient. Coupled with a hydrostatic transmission, the mower offers seamless speed adjustments without the need for shifting gears, allowing users to maneuver easily across various terrains.

The mower is equipped with a 42-inch cutting deck, which strikes a balance between size and maneuverability. This deck size is suitable for efficiently tackling both small and large areas while still being able to navigate tighter spaces like flower beds or around trees. The cutting height can be easily adjusted from 1.5 to 4 inches, enabling customization based on grass type and seasonal requirements.

In terms of technology, the Craftsman 917.27242 features an innovative, ergonomic design that enhances user comfort. The seat is adjustable, ensuring a relaxed riding position for operators of different heights. Additionally, the intuitive control panel simplifies operation, incorporating easily accessible controls for starting, cutting height adjustments, and more.

Safety is a priority in the Craftsman design. The mower includes features such as a blade brake that automatically engages when the operator leaves the seat, ensuring that the blades stop immediately when needed. This prevents accidents and adds a layer of security, especially when users need to dismount.

Moreover, the Craftsman 917.27242 is compatible with various attachments, making it a versatile choice. Beyond just mowing, attachments like baggers, mulch kits, and even snow plows can transform this machine for year-round use.

Overall, the Craftsman 917.27242 combines power, efficiency, and user-friendly features to provide an exceptional mowing experience. Suitable for both residential and light commercial use, it stands out in a competitive market, delivering reliability and high-quality performance that homeowners can depend on for maintaining their lawns.