Belt Installation, To Adjust Brake | Craftsman 917.27242 manual

Craftsman 917.27242 owner manual Belt Installation, To Adjust Brake, To Replace Motion Drive Belt

BELT INSTALLATION -

4.Install new belt in reverse order of

•removal.

5.Make sure belt is in all pulley grooves

and inside all belt guides.

6.Install mower in reverse order of removal instructions.

TO ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

1.Depress clutch/brake pedal and engage parking brake.

2.Measure distance between brake operating arm and nut "A" on brake rod.

3.If distance is other than 1-9/16", loosen jam nut and turn nut "A" until distance

becomes 1-9/16". Retighten jam nut against nut "A".

4, Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, furfher maintenance is necessary. Contact a Sears or other qualified service center.

With Parking Brake "Engaged"

Nut "A"

	- Operating
	Arm
DO No	nut. if further brake adjust-

ment is necessary contactyour nearest authodzed service center/department

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

1.Remove mower (See "TO REMOVE

MOWER" in this section of this manual.)

2.Disconnect clutch wire harness.

3.Remove clutch Iocator.

4.Remove belt from stationary idler and clutching idler.

5.Pull belt slack toward rear of tractor.

Carefully remove belt upwards from transmission input pulley and over cooting fan blades.

6.Pull belt toward front of tractor and remove downwards from around electric clutch.

7.Install new belt by reversing above procedure.

ElectriLocater

Clutchin

Idler

Idler
	Wire
Input Pulley	Harness

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT

The motion control lever has been preset at the factory and adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, end lightly tighten.

2.Start engine and move motion control lever until tractor does not move forward or backward.

3.Hold motion control lever in that position and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neutral (N) (lock gate) position.

6.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position,

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral

position, follow these steps:

1, Loosen the adjustment bolt,

2.Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

917.27242 specifications

The Craftsman 917.27242 is a high-performance riding lawn mower that delivers the power and precision needed for effective lawn maintenance. Designed for efficiency and ease of use, this model is ideal for homeowners with medium to large-sized lawns.

One of the standout features of the Craftsman 917.27242 is its robust 24 HP Kohler engine. This powerful engine ensures reliable starting and strong performance, making mowing tasks quicker and more efficient. Coupled with a hydrostatic transmission, the mower offers seamless speed adjustments without the need for shifting gears, allowing users to maneuver easily across various terrains.

The mower is equipped with a 42-inch cutting deck, which strikes a balance between size and maneuverability. This deck size is suitable for efficiently tackling both small and large areas while still being able to navigate tighter spaces like flower beds or around trees. The cutting height can be easily adjusted from 1.5 to 4 inches, enabling customization based on grass type and seasonal requirements.

In terms of technology, the Craftsman 917.27242 features an innovative, ergonomic design that enhances user comfort. The seat is adjustable, ensuring a relaxed riding position for operators of different heights. Additionally, the intuitive control panel simplifies operation, incorporating easily accessible controls for starting, cutting height adjustments, and more.

Safety is a priority in the Craftsman design. The mower includes features such as a blade brake that automatically engages when the operator leaves the seat, ensuring that the blades stop immediately when needed. This prevents accidents and adds a layer of security, especially when users need to dismount.

Moreover, the Craftsman 917.27242 is compatible with various attachments, making it a versatile choice. Beyond just mowing, attachments like baggers, mulch kits, and even snow plows can transform this machine for year-round use.

Overall, the Craftsman 917.27242 combines power, efficiency, and user-friendly features to provide an exceptional mowing experience. Suitable for both residential and light commercial use, it stands out in a competitive market, delivering reliability and high-quality performance that homeowners can depend on for maintaining their lawns.