Craftsman 917.27182 manual Cleaning, Aution Before Performing ANY Service or Adjustments

Page 23

CLEANING

We do not recommend using a garden

 

hose to clean your tractor unless the

iofCleanall foreignengine,matterbatten/,. seat, finish, etc. Keep finished surfaces and wheels

free of all gasoline, oil, etc.

•Protect painted surfaces with automo- tive type wax.

electrical system, muffler, air filter and carburetor are covered to keep water out.

Water in engine can result in a shortened

engine life.

_ AUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place motion control lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key "OFF" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot

come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

1.Place attachment clutch in "DISEN-

GAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off engine pulley.

4.Remove small retainer spring, and lift clutch spring off pulley bolt.

5.Remove large retainer spring, slide collar off and push housing guide out of bracket.

6.Disconnect anti-swaybar from chassis bracket by removing retainer spring.

7.Disconnect suspension arms from rear deck brackets by removing retainer springs.

8.Disconnect front links from deck by removing retainer springs.

SmallRetainer Spring

\

9.Raise lift lever to raise suspension arms. Slide mower out from under

tractor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the

tractor, remove the front links and hook

the clutch spring Into square hole in frame•

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with discharge guard to right side of tractor.

3.Lower lift lever to its lowest position.

4.Install mower in reverse order of removal instructions.

Clutch

Retainer S

Anti-Sway

Retainer Springs

(Both Sides)

Housing

Large Retainer Bracket

Spdng

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents For answers to your questions About this product, Call IcrrftsmrniLimited 90 DAY Warranty on Battery Do not General OperationII. Slope Operation Mower blades are sharp and can cut IV. ServiceIiichildren That may obscure visionNeutral, you may lose control of the tractor Safety is InvolvedRepair Agreement Product SpecificationsFor FutureUse SeatKeys Video Cassette Oil DrainTubeBefore Removing Tractor from Skid Attach Steering Wheel Install Seat If previously removed All assembly instructions have been #CHECKLISTENG,NEONENG,NEOFFOLFRESSUREL,G.TSONO%MF Motion IndicatorKnowyourtractor Clutch BrakePedal HeightGround Drive To Adjust Mower Cutting HeightHowto Useyourtractor To SET Parking Brake Stopping Mower BladesTo Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsADD Gasoune Viscosity Chart in the Mainte- nance section of this manualTowing Carts and Other Attachments Before Stafitingthe Engine Check Engine OIL LevelPurgetransmission Warm Weather Starting 50 F and aboveSlowly Automatic Transmission Warm UPMulching Mowingtips MowingtipsZerk Spindle Lubrication ChartAll adjustmentsin the Service General RecommendationsBlade Care Brake OperationTires Operator Presence SystemTranbaxle Pump Fluid To Clean Battery and TerminalsBelts Transaxle CoolingCartridge Tractor To Remove Mower CleaningAution Before Performing ANY Service or Adjustments To Install MowerBelt Removal To Level Mower HousingSIDE-TO-SIDE Adjustment To Replace Mower Blade Drive BeltTo Replace Motion Drive Belt To Adjust BrakeTransaxle Motion Control Lever Neutral Adjustment Transmission To Adjust Steering WheelReplacing Battery To Start Engine with WeakInterlocks and Relays To Remove Hood and Grill AssemblyTo Adjust Throttle Control Cable To Adjust Choke ControlRPM To Adjust CarburetorPreliminary Setting Final SettingTractor Dirtyfuel filter Stale or dirtyfuel Loose or damaged wiring Carburetor out of adjustmentProblem Dirty air filterReplace blade Tighten blade bolt Troubleshooting ChartCause OrrectionReplace motiondrive belt BlownfusePlace freewheel controlin Engaged positionTractor -- Model Number SchematicTractor - Model Number ElectricalKEY Part Descripon ElectricalTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.271820 Chassis and EnclosuresGROUNDDRIVETRACTOR- MODELNUMBER917.271820 KEY Part Tractor -- Model Number 917,271820 Ground DriveTractor - Model Number 917.271820 Steering Assembly KEY Part Description Spark Arrester Tractor - Model Number 917,271820Optional Equipment KEY Paitt NO. NO.DESCRIPTION Tractor MODELNUMBER917.271820 SEAT AssEMBLYWheels & Tires DecalsTractor - Model Number Lift Assembly Lift Assembly Tractor . Model Number Tractor - Model Number Mower Deck 2629J Spacer\ \ 20w-50 11019LABELKIT LO. Ownersmanual2911 971I 934 TRACTOR-- MODELNUMBER917.271820634 1770 51A 16390569 5101 513 802 783 1051803 797 544 801 Gasket SET271411 272490 Page Page Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationRev 12.8.00 TR Get it fixed, at your home or ours

917.27182 specifications

The Craftsman 917.27182 is a versatile and reliable lawn tractor designed for homeowners who seek efficiency and ease in maintaining their yards. Known for its robust construction and innovative features, this lawn tractor is designed to handle a variety of tasks with ease.

One of the standout features of the Craftsman 917.27182 is its powerful engine. Equipped with a 17.5 HP Briggs & Stratton engine, this tractor provides plenty of power to tackle even the toughest mowing conditions. The engine is designed for smooth operation and is built for longevity, making it a dependable choice for lawn care.

The cutting deck of the Craftsman 917.27182 measures 42 inches, offering a wide cutting path that allows users to cover more ground in less time. The deck is made of durable materials, ensuring that it can withstand the rigors of regular use. Additionally, it features a multi-blade design that delivers a clean and precise cut, promoting healthy grass growth.

Another significant characteristic of this lawn tractor is its 6-speed transmission. The automatic transmission allows for smooth shifting between gears, providing users with the flexibility to adjust their speed based on the terrain and grass height. This feature enhances maneuverability and improves overall mowing efficiency.

The Craftsman 917.27182 is equipped with a comfortable and ergonomic seat, designed to reduce fatigue during extended use. The seat can be easily adjusted to accommodate different user heights, ensuring optimal comfort for everyone. Furthermore, the tractor has a tight turning radius, making it easy to navigate around obstacles and flower beds.

In terms of technological advancements, this model incorporates a robust front axle and durable rear wheels, designed for stability and traction. The inclusion of easy-access controls allows users to operate the tractor without difficulty, enhancing the overall user experience.

Maintenance is made simple with the Craftsman 917.27182, as it features an easily accessible oil filter and fuel tank, allowing for hassle-free servicing. This focus on convenience extends to the design of the mower deck, which can be tilted for easier cleaning after use.

Overall, the Craftsman 917.27182 lawn tractor combines power, durability, and user-friendly features to create an impressive tool for lawn care. Its blend of technology and thoughtful design makes it a reliable choice for any homeowner looking to maintain a beautiful lawn with minimal effort.
Top Page Image Contents