Craftsman 917.27113 owner manual Mulching Mowing Tips

Page 15

COLD WEATHER STARTING ( 50 ° F and below)

When engine starts, allow engine to run with the throttle control in the choke

position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

The attachments can also be used

during the engine warm-up period.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance. See

=TO ADJUST CARBURETOR" in the

Service and Adjustments section of this manual.

MOWING TIPS

Tire chains cannot be used when the mower housing is attached to tractor.

Mower should be properly leveled for best mowing performance. See =TO

LEVEL MOWER HOUSING" in the

Service and Adjustments section of this manual.

The left hand side of mower should be used for trimming.

Drive so that clippings are discharged onto the area that has been cut. Have

the cut area to the right of the tractor. This will result in a more even distribu-

tion of clippings and more uniform cutting.

When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished.

If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height.

Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used,

MULCHING MOWING TIPS

IMPORTANT: For best performance,

keep mower housing free of built-up grass and trash. Clean after each use.

The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the

mulched grass will biodegrade quickly to provide nutrients for the lawn.

Always mulch with your highest engine (blade) speed as this will

provide the best recutting action of the blades.

Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early afternoon. At this time the grass has dried and the newly cut area will not be exposed to the direct sun.

For best results, adjust the mower cutting height so that the mower cuts off only the top one-third of the grass blades. For extremely heavy mulching, reduce your width of cut on each pass and mow slowly.

Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpen- dicular to the first cut path.

Change your cutting pattem from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn.

15

Image 15
Contents Rrftsmrw Service Adjustments Safety General Operation Slope OperationChildren Service Customer Responsibilities Repair AgreementSteering Wheel Unpack Carton Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonTo Drive Tractor OFF Skid Install SeatCheck Deck Levelness Please Review the Following ChecklistTo Convert to Bagging or Discharging Check Tire PressureH L c Knowyourtractor National Standards InstituteTo USE Throttle Control HOW to USE Your TractorTo Operate on Hills To Operate MowerTo Transport Check Engine OIL Level Towing Carts and Other AttachmentsBefore Starting the Engine To Start EngineMulching Mowing Tips Mowing TipsLubrication Chart General RecommendationsBefore Each USE Blade Removal To Sharpen BladeEngine Lubrication Clean AIR ScreenTransaxle Cooling BeltsSpark Plugs To Service PRE-CLEANEREngine OIL Filter MufflerTo Remove Mower CleaningTo Install Mower TractorTo Level Mower Housing SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment To Replace Mower Blade Drive Belt To Adjust BrakeBelt Installation To Replace Motion Drive BeltTo Attach Jumper Cables To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsInterlocks and Relays To Remove Hood and Grill AssemblyReplacing Battery To Replace Headlight BulbTo Adjust Carburetor Engine To Adjust Throttle Control CableAcceleration Test Engine Troubleshooting Problem Chart CauseCorrection Correction Troubleshooting Chart Problem CauseTroubleshooting Chart ProblemcauseOFF Tractor - Model Number SchematicElectrical KEY Part Description Tractor -- Model Number ElectricalTractor --MODEL Number Chassis and Enclosures Tractor - Model Number 917.271130 Chassis and Enclosures Tractor - Model Number Ground Drive Ground Drive KEY Part Description Tractor Model Number 917,271130Tractor -- Model Number 917.271130 Steeringassembly TRACTOR-- Model Number 917.271130 Steering Assembly Tractor -- Model Number Engine KEY Part Tractor - Model Number Seatassembly Wheels & Tires KEY Part Description DecalsTractor -- Model Number Lift Assembly Tractor --MODEL Number Lift Assembly Tractor - Model Number Mower Deck UNC KEY Part NO, no157 TRACTOR-- Model Number Peerless TRANSAXLE--MODELNUMBER20545C REF Part NO. noPart Description Cylinder HEAD, Valve and Breather Cylinder HEADNALVF.JBREATHERCRANKCASE KEY Part Description Ignition / Electrical Blower Housing and Baffles 25-154-02 Starting System Ehgihe Controls OIL PAN / Lubrication Starting System Engine Controls KEY Part NO. NO.DESCRIPTION OIL PanilubricationKEY Part NO. no Crahkhaft Description Fuel System Crankshaft KEY Part DescriptionPage Only Ride UP and Down Hill Not Across HillSighting Guide HomeCnt

917.27113 specifications

The Craftsman 917.27113 is a riding lawn mower that has garnered attention for its robust features, user-friendly design, and performance efficiency. This model is particularly well-suited for homeowners with large yards, delivering strong cutting power and ease of use.

One of the standout features of the Craftsman 917.27113 is its powerful engine. Equipped with a reliable 17.5 HP Briggs & Stratton engine, this riding mower provides ample power for mowing through thick grass and uneven terrain. The engine’s design ensures consistent performance, while the automatic transmission allows for smooth and effortless acceleration, making it simple to navigate various landscapes.

The cutting deck is another significant aspect of the Craftsman 917.27113. It features a 42-inch cutting deck, making it ideal for mowing large areas efficiently. The cutting height can be adjusted to multiple positions, allowing users to customize their lawn maintenance according to the season or personal preference. The blade engagement system is easy to use, enabling quick activation of the blades without the hassle of manual adjustments.

In terms of comfort, the Craftsman 917.27113 was designed with the user in mind. It boasts a comfortable high-back seat that offers support during prolonged mowing sessions. The ergonomically designed steering wheel ensures that users can navigate effortlessly, even in tight corners. The spacious foot area adds to the overall comfort, allowing for a more relaxed mowing experience.

Another notable technology in this model is the mulching capability. With the optional mulch plug, users can convert the mower to recycle grass clippings back into the lawn, promoting healthier grass while reducing the need for bagging. This eco-friendly feature not only helps in maintaining a nutrient-rich lawn but also simplifies post-mowing clean-up.

Safety is a priority in the Craftsman 917.27113, with features like the blade brake that stops the blades when the operator leaves the seat. This ensures that users remain safe while operating the mower. The design also incorporates sturdy construction materials that enhance the mower’s durability, making it a worthwhile investment for long-term lawn care.

Overall, the Craftsman 917.27113 delivers a blend of power, comfort, and technology. Its robust performance, customizable cutting options, and user-friendly features make it an excellent choice for homeowners looking to keep their lawns in pristine condition. Whether for regular mowing or tackling overgrown areas, this riding mower stands out as a reliable and effective tool in lawn maintenance.