Craftsman 917.27113 owner manual Tractor, Cleaning, To Remove Mower, To Install Mower

Page 20

ClamP_lamp

Fuel Filter

CLEANING

iofleanall foreignengine,matterbattery,. seat, finish, etc. Keep finished surfaces and wheels

free of all gasoline, oil, etc.

•Protect painted surfaces with automo- tive type wax.

We do not recommend using a garden hose to clean your tractor unless the electrical system, muffler, air filter and

carburetor are covered to keep water out. Water in engine can result in a short- ened engine life.

_CAUTION: Before performing any service or adjustments:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral (N) position.

• Place attachment clutch in "DISENGAGED" position.

iMakeum ignitionsurethekeyblades=OFF"andand allremovemovingkeyparts. have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

•Place attachment clutch in =DISEN-

GAGED" position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Remove small retainer spring, and lift clutch spring off pulley bolt.

•Remove large retainer spring, slide

collar off and push housing guide out of bracket.

•Disconnect anti-swaybar from chassis bracket by removing retainer spdng.

•Disconnect suspension arms from rear deck brackets by removing retainer springs.

•Disconnect front links from deck by removing retainer springs.

Small Retainer

Clutch Sp

Retainer Spdng

Anti-Sway

Collar

Housing

•Raise lift lever to raise suspension arms. Slide mower out from under

tractor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook

the clutch spring onto square hole in frame.

TO INSTALL MOWER

•Raise attachment lift lever to its highest position.

•Slide mower under tractor with discharge guard to right side of tractor.

•Lower lift lever to its lowest position.

•Install mower in reverse order of removal instructions.

'_"_"""- Square Hole

Retainer Springs

(Both Sides)

Large

Spdng

Bracket

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Rrftsmrw Service Adjustments Safety Children General OperationSlope Operation Service Repair Agreement Customer ResponsibilitiesSteering Wheel Tools Required for Assembly HOW to SET UP Your TractorTo Remove Tractor from Carton Unpack CartonInstall Seat To Drive Tractor OFF SkidPlease Review the Following Checklist To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessH L c National Standards Institute KnowyourtractorHOW to USE Your Tractor To USE Throttle ControlTo Transport To Operate on HillsTo Operate Mower Towing Carts and Other Attachments Before Starting the EngineTo Start Engine Check Engine OIL LevelMowing Tips Mulching Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations To Sharpen Blade Blade RemovalClean AIR Screen Transaxle CoolingBelts Engine LubricationTo Service PRE-CLEANER Engine OIL FilterMuffler Spark PlugsCleaning To Install MowerTractor To Remove MowerFRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment To Adjust Brake Belt InstallationTo Replace Motion Drive Belt To Replace Mower Blade Drive BeltTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs To Attach Jumper CablesTo Remove Hood and Grill Assembly Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysEngine To Adjust Throttle Control Cable To Adjust CarburetorAcceleration Test Engine Correction Troubleshooting ProblemChart Cause Troubleshooting Chart Problem Cause CorrectionOFF Troubleshooting ChartProblemcause Schematic Tractor - Model NumberElectrical Tractor -- Model Number Electrical KEY Part DescriptionTractor --MODEL Number Chassis and Enclosures Tractor - Model Number 917.271130 Chassis and Enclosures Tractor - Model Number Ground Drive Tractor Model Number 917,271130 Ground Drive KEY Part DescriptionTractor -- Model Number 917.271130 Steeringassembly TRACTOR-- Model Number 917.271130 Steering Assembly Tractor -- Model Number Engine KEY Part Tractor - Model Number Seatassembly Decals Wheels & Tires KEY Part DescriptionTractor -- Model Number Lift Assembly Tractor --MODEL Number Lift Assembly Tractor - Model Number Mower Deck KEY Part NO, no UNC157 Part Description TRACTOR-- Model NumberPeerless TRANSAXLE--MODELNUMBER20545C REF Part NO. no Cylinder HEAD, Valve and Breather Cylinder HEADNALVF.JBREATHERCRANKCASE KEY Part Description Ignition / Electrical Blower Housing and Baffles 25-154-02 Starting System Ehgihe Controls OIL PAN / Lubrication KEY Part NO. no Starting System Engine Controls KEY Part NO. NO.DESCRIPTIONOIL Panilubrication Crahkhaft Fuel System Crankshaft KEY Part Description DescriptionPage Sighting Guide Only Ride UP and Down HillNot Across Hill HomeCnt

917.27113 specifications

The Craftsman 917.27113 is a riding lawn mower that has garnered attention for its robust features, user-friendly design, and performance efficiency. This model is particularly well-suited for homeowners with large yards, delivering strong cutting power and ease of use.

One of the standout features of the Craftsman 917.27113 is its powerful engine. Equipped with a reliable 17.5 HP Briggs & Stratton engine, this riding mower provides ample power for mowing through thick grass and uneven terrain. The engine’s design ensures consistent performance, while the automatic transmission allows for smooth and effortless acceleration, making it simple to navigate various landscapes.

The cutting deck is another significant aspect of the Craftsman 917.27113. It features a 42-inch cutting deck, making it ideal for mowing large areas efficiently. The cutting height can be adjusted to multiple positions, allowing users to customize their lawn maintenance according to the season or personal preference. The blade engagement system is easy to use, enabling quick activation of the blades without the hassle of manual adjustments.

In terms of comfort, the Craftsman 917.27113 was designed with the user in mind. It boasts a comfortable high-back seat that offers support during prolonged mowing sessions. The ergonomically designed steering wheel ensures that users can navigate effortlessly, even in tight corners. The spacious foot area adds to the overall comfort, allowing for a more relaxed mowing experience.

Another notable technology in this model is the mulching capability. With the optional mulch plug, users can convert the mower to recycle grass clippings back into the lawn, promoting healthier grass while reducing the need for bagging. This eco-friendly feature not only helps in maintaining a nutrient-rich lawn but also simplifies post-mowing clean-up.

Safety is a priority in the Craftsman 917.27113, with features like the blade brake that stops the blades when the operator leaves the seat. This ensures that users remain safe while operating the mower. The design also incorporates sturdy construction materials that enhance the mower’s durability, making it a worthwhile investment for long-term lawn care.

Overall, the Craftsman 917.27113 delivers a blend of power, comfort, and technology. Its robust performance, customizable cutting options, and user-friendly features make it an excellent choice for homeowners looking to keep their lawns in pristine condition. Whether for regular mowing or tackling overgrown areas, this riding mower stands out as a reliable and effective tool in lawn maintenance.
Top Page Image Contents