Craftsman 917.27113 owner manual To Service PRE-CLEANER, Engine OIL Filter, Muffler, Spark Plugs

Page 19

CLEAN AIR INTAKE/COOLING

AREAS

To insure proper cooling, make sure the grass screen, cooling fins, and other extemal surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary.

Make sure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

AIR FILTER

Your engine will not run properly using a dirty air filter. Clean the foam pre- cleaner after every 25 hours of operation or every season. Service paper car- tridge every 100 hours of operation or

every season, whichever occurs first. Service air cleaner more often under

dusty conditions.

•Remove knob and cover.

•Remove wing nut and air cleaner from base.

TO SERVICE PRE-CLEANER

•Slide foam pre-cleaner off cartridge.

•Wash it in liquid detergent and water.

•Squeeze it dry in a clean cloth. Allow it to dry.

•Saturate it in engine oil. Wrap it in clean, absorbent cloth and squeeze to remove excess oil.

TO SERVICE CARTRIDGE

•Replace a dirty, bent, or damaged

cartridge.

NOTE: Do not wash the paper cartridge or use pressurized air, as this will damage the cartridge.

•Reinstall the pre-cleaner (cleaned and oiled) over the paper cartridge.

•Reassemble air cleaner, wing nut, cover and tighten knob securely.

ENGINE OIL FILTER

Replace the e'lgine oil filter every season or every other oil change if the tractor is used more than 100 hours in

one yean

•Drain oil from engine crankcase (See "TO CHANGE ENGINE OIL" in this

section of this manual, through step remove drain plug).

•Remove oil filter and wipe off filter adapter.

•Apply a thin coating of new engine oil to the rubber gasket on replacement oil filter.

•Install replacement oil filter on filter adapter. Turn oil filter clockwise until rubber gasket contacts the filter adapter, then tighten filter an addi- tional 1/2 turn.

•Fill crankcase with new oil (See "TO

CHANGE ENGINE OIL" in this section of this manual). For approximate capacity see "PRODUCT SPECIFiCA-

TIONS" section of this manual,

•Start the engine and check for oil leaks. Correct any teaks before placin engine into full operation.

Oil Filter

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or

damage.

SPARK PLUGS

Replace spark plugs at the beginning c each mowing season or after every 100

hours of operation, whichever occurs

first. Spark plug type and gap setting ar shown in =PRODUCT SPEClFICATION_

section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes

clogged, obstructing fuel flow to carbur_ tor, replacement is required.

•With engine cool, remove filter and plug fuel line sections.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned,

•Immediately wipe up any spilled gasoline.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Rrftsmrw Service Adjustments Safety Slope Operation General OperationChildren Service Customer Responsibilities Repair AgreementSteering Wheel Unpack Carton Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonTo Drive Tractor OFF Skid Install SeatCheck Deck Levelness Please Review the Following ChecklistTo Convert to Bagging or Discharging Check Tire PressureH L c Knowyourtractor National Standards InstituteTo USE Throttle Control HOW to USE Your TractorTo Operate Mower To Operate on HillsTo Transport Check Engine OIL Level Towing Carts and Other AttachmentsBefore Starting the Engine To Start EngineMulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartBefore Each USE Blade Removal To Sharpen BladeEngine Lubrication Clean AIR ScreenTransaxle Cooling BeltsSpark Plugs To Service PRE-CLEANEREngine OIL Filter MufflerTo Remove Mower CleaningTo Install Mower TractorSIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment To Replace Mower Blade Drive Belt To Adjust BrakeBelt Installation To Replace Motion Drive BeltTo Attach Jumper Cables To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsInterlocks and Relays To Remove Hood and Grill AssemblyReplacing Battery To Replace Headlight BulbTo Adjust Carburetor Engine To Adjust Throttle Control CableAcceleration Test Engine Chart Cause Troubleshooting ProblemCorrection Correction Troubleshooting Chart Problem CauseProblemcause Troubleshooting ChartOFF Tractor - Model Number SchematicElectrical KEY Part Description Tractor -- Model Number ElectricalTractor --MODEL Number Chassis and Enclosures Tractor - Model Number 917.271130 Chassis and Enclosures Tractor - Model Number Ground Drive Ground Drive KEY Part Description Tractor Model Number 917,271130Tractor -- Model Number 917.271130 Steeringassembly TRACTOR-- Model Number 917.271130 Steering Assembly Tractor -- Model Number Engine KEY Part Tractor - Model Number Seatassembly Wheels & Tires KEY Part Description DecalsTractor -- Model Number Lift Assembly Tractor --MODEL Number Lift Assembly Tractor - Model Number Mower Deck UNC KEY Part NO, no157 Peerless TRANSAXLE--MODELNUMBER20545C REF Part NO. no TRACTOR-- Model NumberPart Description Cylinder HEAD, Valve and Breather Cylinder HEADNALVF.JBREATHERCRANKCASE KEY Part Description Ignition / Electrical Blower Housing and Baffles 25-154-02 Starting System Ehgihe Controls OIL PAN / Lubrication OIL Panilubrication Starting System Engine Controls KEY Part NO. NO.DESCRIPTIONKEY Part NO. no Crahkhaft Description Fuel System Crankshaft KEY Part DescriptionPage Not Across Hill Only Ride UP and Down HillSighting Guide HomeCnt

917.27113 specifications

The Craftsman 917.27113 is a riding lawn mower that has garnered attention for its robust features, user-friendly design, and performance efficiency. This model is particularly well-suited for homeowners with large yards, delivering strong cutting power and ease of use.

One of the standout features of the Craftsman 917.27113 is its powerful engine. Equipped with a reliable 17.5 HP Briggs & Stratton engine, this riding mower provides ample power for mowing through thick grass and uneven terrain. The engine’s design ensures consistent performance, while the automatic transmission allows for smooth and effortless acceleration, making it simple to navigate various landscapes.

The cutting deck is another significant aspect of the Craftsman 917.27113. It features a 42-inch cutting deck, making it ideal for mowing large areas efficiently. The cutting height can be adjusted to multiple positions, allowing users to customize their lawn maintenance according to the season or personal preference. The blade engagement system is easy to use, enabling quick activation of the blades without the hassle of manual adjustments.

In terms of comfort, the Craftsman 917.27113 was designed with the user in mind. It boasts a comfortable high-back seat that offers support during prolonged mowing sessions. The ergonomically designed steering wheel ensures that users can navigate effortlessly, even in tight corners. The spacious foot area adds to the overall comfort, allowing for a more relaxed mowing experience.

Another notable technology in this model is the mulching capability. With the optional mulch plug, users can convert the mower to recycle grass clippings back into the lawn, promoting healthier grass while reducing the need for bagging. This eco-friendly feature not only helps in maintaining a nutrient-rich lawn but also simplifies post-mowing clean-up.

Safety is a priority in the Craftsman 917.27113, with features like the blade brake that stops the blades when the operator leaves the seat. This ensures that users remain safe while operating the mower. The design also incorporates sturdy construction materials that enhance the mower’s durability, making it a worthwhile investment for long-term lawn care.

Overall, the Craftsman 917.27113 delivers a blend of power, comfort, and technology. Its robust performance, customizable cutting options, and user-friendly features make it an excellent choice for homeowners looking to keep their lawns in pristine condition. Whether for regular mowing or tackling overgrown areas, this riding mower stands out as a reliable and effective tool in lawn maintenance.
Top Page Image Contents