Craftsman 917.27113 owner manual Install Seat, To Drive Tractor OFF Skid

Page 8

Seat

Terminal

Battery

Door

INSTALL SEAT

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.

•Assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob, securely.

Seat

Shoulder Seat Pan

Bolt

FLat Washer

Adjustment

Knob

NOTE: You may now roll or drive your

tractor off the skid. Follow the appropriate instruction below to remove the tractor from

the skid.

TO ROLLTRACTOR OFF SKID (See Operation section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal

•Place gearshift lever in neutral (N) position.

•Roll tractor forward off skid.

•Remove banding holding discharge guard up against tractor.

TO DRIVE TRACTOR OFF SKID

(See Operation section for location and function of controls)

_IbWARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clea, of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tanF with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set th_ parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle

position.

•Depress clutch/brake pedal into full =BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to =OFF" position. Continue with the instructions that follow,

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Rrftsmrw Service Adjustments Safety Children General OperationSlope Operation Service Repair Agreement Customer ResponsibilitiesSteering Wheel Tools Required for Assembly HOW to SET UP Your TractorTo Remove Tractor from Carton Unpack CartonInstall Seat To Drive Tractor OFF SkidPlease Review the Following Checklist To Convert to Bagging or DischargingCheck Tire Pressure Check Deck LevelnessH L c National Standards Institute KnowyourtractorHOW to USE Your Tractor To USE Throttle ControlTo Transport To Operate on HillsTo Operate Mower Towing Carts and Other Attachments Before Starting the EngineTo Start Engine Check Engine OIL LevelMowing Tips Mulching Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations To Sharpen Blade Blade RemovalClean AIR Screen Transaxle CoolingBelts Engine LubricationTo Service PRE-CLEANER Engine OIL FilterMuffler Spark PlugsCleaning To Install MowerTractor To Remove MowerFRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment To Adjust Brake Belt InstallationTo Replace Motion Drive Belt To Replace Mower Blade Drive BeltTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs To Attach Jumper CablesTo Remove Hood and Grill Assembly Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysEngine To Adjust Throttle Control Cable To Adjust CarburetorAcceleration Test Engine Correction Troubleshooting ProblemChart Cause Troubleshooting Chart Problem Cause CorrectionOFF Troubleshooting ChartProblemcause Schematic Tractor - Model NumberElectrical Tractor -- Model Number Electrical KEY Part DescriptionTractor --MODEL Number Chassis and Enclosures Tractor - Model Number 917.271130 Chassis and Enclosures Tractor - Model Number Ground Drive Tractor Model Number 917,271130 Ground Drive KEY Part DescriptionTractor -- Model Number 917.271130 Steeringassembly TRACTOR-- Model Number 917.271130 Steering Assembly Tractor -- Model Number Engine KEY Part Tractor - Model Number Seatassembly Decals Wheels & Tires KEY Part DescriptionTractor -- Model Number Lift Assembly Tractor --MODEL Number Lift Assembly Tractor - Model Number Mower Deck KEY Part NO, no UNC157 Part Description TRACTOR-- Model NumberPeerless TRANSAXLE--MODELNUMBER20545C REF Part NO. no Cylinder HEAD, Valve and Breather Cylinder HEADNALVF.JBREATHERCRANKCASE KEY Part Description Ignition / Electrical Blower Housing and Baffles 25-154-02 Starting System Ehgihe Controls OIL PAN / Lubrication KEY Part NO. no Starting System Engine Controls KEY Part NO. NO.DESCRIPTIONOIL Panilubrication Crahkhaft Fuel System Crankshaft KEY Part Description DescriptionPage Sighting Guide Only Ride UP and Down HillNot Across Hill HomeCnt

917.27113 specifications

The Craftsman 917.27113 is a riding lawn mower that has garnered attention for its robust features, user-friendly design, and performance efficiency. This model is particularly well-suited for homeowners with large yards, delivering strong cutting power and ease of use.

One of the standout features of the Craftsman 917.27113 is its powerful engine. Equipped with a reliable 17.5 HP Briggs & Stratton engine, this riding mower provides ample power for mowing through thick grass and uneven terrain. The engine’s design ensures consistent performance, while the automatic transmission allows for smooth and effortless acceleration, making it simple to navigate various landscapes.

The cutting deck is another significant aspect of the Craftsman 917.27113. It features a 42-inch cutting deck, making it ideal for mowing large areas efficiently. The cutting height can be adjusted to multiple positions, allowing users to customize their lawn maintenance according to the season or personal preference. The blade engagement system is easy to use, enabling quick activation of the blades without the hassle of manual adjustments.

In terms of comfort, the Craftsman 917.27113 was designed with the user in mind. It boasts a comfortable high-back seat that offers support during prolonged mowing sessions. The ergonomically designed steering wheel ensures that users can navigate effortlessly, even in tight corners. The spacious foot area adds to the overall comfort, allowing for a more relaxed mowing experience.

Another notable technology in this model is the mulching capability. With the optional mulch plug, users can convert the mower to recycle grass clippings back into the lawn, promoting healthier grass while reducing the need for bagging. This eco-friendly feature not only helps in maintaining a nutrient-rich lawn but also simplifies post-mowing clean-up.

Safety is a priority in the Craftsman 917.27113, with features like the blade brake that stops the blades when the operator leaves the seat. This ensures that users remain safe while operating the mower. The design also incorporates sturdy construction materials that enhance the mower’s durability, making it a worthwhile investment for long-term lawn care.

Overall, the Craftsman 917.27113 delivers a blend of power, comfort, and technology. Its robust performance, customizable cutting options, and user-friendly features make it an excellent choice for homeowners looking to keep their lawns in pristine condition. Whether for regular mowing or tackling overgrown areas, this riding mower stands out as a reliable and effective tool in lawn maintenance.
Top Page Image Contents