HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE
1.Remove the elbow tube and vacu-
um bag by turning the knob coun- terclockwise to loosen the elbow tube.
2.Remove the vacuum tubes by turn- ing the tubes clockwise.
3.Close the vacuum inlet cover and make sure it is latched closed.
4.Reinstall the blower tubes (see
BLOWER TUBE ASSEMBLY).
VACUUM BAG SHOULDER STRAP ADJUSTMENT
1.Hold the unit as shown with the muf-
fler side facing away from your body and clothes.
2.Pass the shoulder strap over your head and onto your right shoulder.
3.Extend your left arm toward the rear of the vacuum bag.
4.Adjust shoulder strap until the vacuum bag/shoulder strap seam lies between your thumb and index finger.
5.Make sure air flows freely from the elbow tube into bag. If bag is kinked, the unit will not operate properly.
SHOULDER STRAP ATTACHMENT (optional accessory #71-85783)
1.Pass the shoulder strap over your head and onto your left shoulder.
2.Snap the hook onto the retainer (see following illustration).
VACUUM USE
RetainerRetainer
BLOWER USE I
\
\
",_5