Using a support stand, Limbing, Pruning

•Your first cut should extend 1/3 of the diameter of the log.

•Finish with your second cut.

Using a log for support

f/1 stCut

Using a support stand

2 nd Cut X

LIMBING AND PRUNING

_IIWARNING:

Be alert for and

guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Al- lowing such contact can resutt in serious injury.

_iI_WARNING: Never climb into a

tree to limb or prune. Do not stand on ladders, platforms, a log, or in any posi- tion which can cause you to lose your balance or control of the saw.

IMPORTANT POINTS

•Work slowly, keeping both hands firmty gripped on the saw. Maintain secure footing and balance.

•Watch out for springpotes, SpringpoIes are smalt size limbs which can catch the saw chain and whip toward you or pull you off balance. Use extreme cau-

tion when cutting small size limbs or slender material,

•Be alert for springback. Watch out for branches that are bent or under

pressure, Avoid being struck by the branch or the saw when the tension

in the wood fibers is released.

•Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

LIMBING

•Always timb a tree after it is cut

down. OnIy then can limbing be done safely and properly.

•Leave the larger limbs underneath the

fetted tree to support the tree as you work.

•Start at the base of the foiled tree and work toward the top, cutting branches and limbs. Remove smaII limbs with one cut.

•Keep the tree between you and the chain. Cut from the side of the tree op- posite the branch you are cutting.

•Remove larger, supporting branches

with the cutting techniques described in BUCKING WITHOUT A SUPPORT.

•Always use an overcut to cut smalI and freety hanging limbs. Undercutting could cause limbs to fail and pinch the SaW.

PRUNING

_I'WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder, Get a professional to do the job.

•Make your first cut 1/3of the way through the bottom of the limb.

•Next make a 2nd cut all the way through the limb. Then cut a third overcut leaving a 1 to 2 inch (2,5 to 5 cm) collar from the truck of the tree,

I,I• sooondout"//, r•

Third ctt_/

Co,,ar _ V_,.__ First cut

/Pruning technique

358.35161 specifications

The Craftsman 358.35161 is a reliable and powerful gas-powered string trimmer designed for homeowners and landscaping enthusiasts alike. Known for its robust performance, this trimmer offers a blend of innovation, comfort, and efficiency.

One of the standout features of the Craftsman 358.35161 is its 25cc 2-cycle engine. This engine provides ample power to tackle tough weeds, grasses, and overgrowth while delivering a user-friendly experience. The lightweight design of this trimmer, weighing approximately 10 pounds, also enhances its maneuverability, allowing users to navigate around gardens, flower beds, and landscaping projects with ease.

The Craftsman 358.35161 incorporates a straight shaft design, which is particularly advantageous for reaching under shrubs and in tight spaces. This design not only promotes better balance and control but also allows for greater reach, making it easier to access hard-to-reach areas. The 17-inch cutting swath ensures that users can cover a significant area in a single pass, improving efficiency during use.

Comfort is a priority with the Craftsman 358.35161, as evidenced by its cushioned grip handle and adjustable shaft length. These features combine to reduce operator fatigue during extended use, allowing users to work for longer periods without discomfort.

The trimmer is equipped with a dual line, bump-feed cutting system, which makes it easy to advance the line without stopping the engine. This system also allows for quick line replacement, enabling users to get back to work with minimal downtime. The 0.095-inch line thickness ensures effective cutting power while also being durable enough to withstand regular use.

A notable technological feature of the Craftsman 358.35161 is its Easy Start System, designed to simplify the starting process. This system reduces the amount of effort needed to start the engine, allowing for a smoother, quicker ignition every time. The fuel-efficient engine also contributes to fewer emissions, making it a more environmentally friendly choice compared to older models.

In summary, the Craftsman 358.35161 is an excellent choice for anyone looking for a versatile and efficient string trimmer. With its lightweight design, powerful engine, user-friendly features, and innovative technologies, it stands out as a reliable tool for maintaining beautiful landscapes. Whether you’re tackling simple yard maintenance or more demanding landscaping tasks, the Craftsman 358.35161 proves itself to be a valuable ally in your gardening endeavors.