Craftsman 358.35161 manual Seasonal Storage, Fuel System, Engine, Other

Page 20

IdleSpeed-T AllowenginetoidleIfthechainmoves,. idleistoofastIftheenginestalls,idleis. tooslowAdjustspeeduntilengineruns. withoutchainmovement(idletoofast)or stalling(idletooslow)Theidlespeed.

screwis tocated in the area above the

primer bulb and is labeled T.

dlllWARNING:

Perform the follow-

ing steps after each use:

•Allow the engine to coot, and secure the unit before storing or transporting.

•Store chain saw and fuel in a well

ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

•Store chain saw with all guards in place and position chain saw so that any sharp object cannot accidentally cause injury.

•Store chain saw well out of the reach of children.

SEASONAL STORAGE

Prepare your unit for storage at the end of the season or ff it wilt not be

used for 30 days or more.

If your chain saw is to be stored for a period of time:

•Clean saw thoroughly before storage.

•Store in a clean dry area.

•Lightly oil external metal surfaces and guide bar.

•Oil the chain and wrap it in heavy pa-

per or cloth.

FUEL SYSTEM

Empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until

the fuel lines and carburetor are empty. Use fresh fuel next season.

•Turn idle screw (T) clockwise to in- crease engine speed.

•Turn idle screw (T) counterclockwise to decrease engine speed.

tf you require farther assistance or are unsure about performing this procedure, contact your Sears Service Center or call our customer assistance help line at 1-800-235-5878.

Under FUELING ENGINE in the OPERA- TION section of this manual, see mes- sage labeled IMPORTANT regarding the use of gasohot in your chain saw. Fuel stabilizer is an acceptabIe alter- native in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fueI tank or fuel storage container.

Follow the mix instructions found on stabilizer containers. Run engine at least 3 minutes after adding stabilizer. Craftsman 40:1,2-cycle engine oil (air cooled) is blended with fuel stabilizer, tf you do not use this oil, you can add a fuel stabilizer to your fuel tank.

ENGINE

•Remove spark pIug and pour 1 taa- spoon of 40:1,2-cycte engine oil (air cooled) through the spark plug open- ing. Slowly pull the starter rope 8 to 10 times to distribute oil.

•Replace spark plug with new one of recommended type and heat range.

•Clean air filter.

•Check entire unit for loose screws, nuts, and bolts. Replace any dam- aged, broken, or worn parts.

•At the beginning of the next season,

use only fresh fuel having the proper gasoline to oil ratio.

OTHER

•Do not store gasoline from one sea- son to another.

•Replace your gasoline can if it starts to rust.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operators Manual ONE Year Full Warranty on Craftsman GAS Chain SAW Plan AheadCarburetor Adjustment Maintain Your SAW in Good Working OrderHandle Fuel with Caution Guard Against KickbackAvoid Putl-ln Reduce the Chance KickbackAvoid Pinch-Kickback Chain Brake WE do not REPModel Carton ContentsAssembly ON/STOP Switch CHOKE/FAST Idle LeverPrimer Bulb Chain TensionGuide BAR and Chain OIL Fueling EngineStopping Your Engine Starting PositionStarting a Warm Engine Difficult Starting or 8tatting a flooded engineOperating Tips Braking function controlInertia activating function control Tree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Hinge holds tree on stump and helps control fallBucking Using a LOG or Support Stand Cutting a Fallen Tree BuckingImportant Points Types of Cutting Used for BuckingUsing a support stand Limbing and Pruning IiwarningLimbing PruningResponsibilities Check Guide BAR Hand tighten onlytCheck Chain Sharpness Clean AIR Filter Inspect and Clean Unit and DecalsCheck Chain Brake Check Fuel Mixture LevelTool8 required Chain Replacement To Replace ChainJustment Chain AdjustmentLoosen Seasonal Storage Fuel SystemEngine OtherRemedy Troubleshooting TableTrouble Cause Trouble RemedyOff-road engine is purchased. Length of Coverage This war Your Warranty RightsWhat is Covered Repair or MAINTENANCE, Replacement and Repair Repair Parts Sears CHAtNSAW Model

358.35161 specifications

The Craftsman 358.35161 is a reliable and powerful gas-powered string trimmer designed for homeowners and landscaping enthusiasts alike. Known for its robust performance, this trimmer offers a blend of innovation, comfort, and efficiency.

One of the standout features of the Craftsman 358.35161 is its 25cc 2-cycle engine. This engine provides ample power to tackle tough weeds, grasses, and overgrowth while delivering a user-friendly experience. The lightweight design of this trimmer, weighing approximately 10 pounds, also enhances its maneuverability, allowing users to navigate around gardens, flower beds, and landscaping projects with ease.

The Craftsman 358.35161 incorporates a straight shaft design, which is particularly advantageous for reaching under shrubs and in tight spaces. This design not only promotes better balance and control but also allows for greater reach, making it easier to access hard-to-reach areas. The 17-inch cutting swath ensures that users can cover a significant area in a single pass, improving efficiency during use.

Comfort is a priority with the Craftsman 358.35161, as evidenced by its cushioned grip handle and adjustable shaft length. These features combine to reduce operator fatigue during extended use, allowing users to work for longer periods without discomfort.

The trimmer is equipped with a dual line, bump-feed cutting system, which makes it easy to advance the line without stopping the engine. This system also allows for quick line replacement, enabling users to get back to work with minimal downtime. The 0.095-inch line thickness ensures effective cutting power while also being durable enough to withstand regular use.

A notable technological feature of the Craftsman 358.35161 is its Easy Start System, designed to simplify the starting process. This system reduces the amount of effort needed to start the engine, allowing for a smoother, quicker ignition every time. The fuel-efficient engine also contributes to fewer emissions, making it a more environmentally friendly choice compared to older models.

In summary, the Craftsman 358.35161 is an excellent choice for anyone looking for a versatile and efficient string trimmer. With its lightweight design, powerful engine, user-friendly features, and innovative technologies, it stands out as a reliable tool for maintaining beautiful landscapes. Whether you’re tackling simple yard maintenance or more demanding landscaping tasks, the Craftsman 358.35161 proves itself to be a valuable ally in your gardening endeavors.
Top Page Image Contents