Craftsman 358.35161 manual Maintain Your SAW in Good Working Order, Carburetor Adjustment

Page 3

OPERATEYOURSAWSAFELY

•Donotoperatechainsawwithone handSeriousinjurytotheoperator,. heipers,bystandersoranycombina- tionofthesepersonsmayresultfrom one-handedoperationAchainsaw. isintendedfortwo-handeduse.

•Operatethechainsawonlyinawelt- ventilatedoutdoorarea.

•Donotoperatesawfromaladderor inatree.

•Makesurethechainwillnotmake contactwithanyobjectwhilestarting theengineNevertrytostartthesaw. whentheguidebarisinacut.

•Donotputpressureonthesawat theendofthecutApplyingpressure.

•FoItow instructions for lubricating and changing accessories.

•Check for damaged parts. Before fur- ther use of the chain saw, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged shouM be properly repaired

or replaced by a Sears Service Center unless otherwise indicated elsewhere

in the operator's manual.

•When not in use, chain saws should

can cause you to _ose control when

the cut is completed.

•Stop engine before setting saw down.

•Hand carry saw only when engine is stopped. Carry with muffler away from body; guide bar & chain project-

ing behind you; guide bar preferably covered with a scabbard.

•Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely as- sembled. Atways reptace bar, chain, hand guard, or chain brake immedi-

ately if it becomes damaged, broken or is otherwise removed.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

,I_ WARNING: Disconnect the

spark plug before performing mainte- nance except carburetor adjustments.

•Have nil chain saw service performed by a qualified service dealer with the

exception of the items listed in the MAINTENANCE section of this manual.

•Make certain the saw chain stops moving when the throttle trigger is released. For correction, refer to

CARBURETOR ADJUSTMENT

•Keep the handies dry, clean, and free from oil or fuet mixture.

•Keep caps and fasteners securely tightened.

•Nonconforming replacement compo-

be stored in a dry, high or locked-up place out of the reach of children.

•When storing saw, use a scabbard or carrying case.

HANDLE FUEL WITH CAUTION

•Do not smoke while handling fuel or while operating the saw.

•Eliminate att sources of sparks or flame in the areas where fuel is

mixed or poured.

•Mix and pour fuel in an outdoor area and use an approved, marked con- tainer for all fuet purposes. Wipe up atl fuel splits before starting saw.

•Move at least 10 feet (3 meters) from fueling site before starting engine.

•Turn the engine off and let saw cooI in a non-combustible area, not on

dry leaves, straw, paper, etc. Slowly remove fuet cap and refuel unit.

•Empty the fuel tank before storing or transporting the unit. Use up fueI left in the carburetor by starting the engine and letting it run until it stops.

•Store the unit and fuel in an area where fuel vapors cannot reach

sparks or open flames from water heaters, electric motors or switches,

furnaces, etc.

GUARD AGAINST KICKBACK

Follow alI safety ruIes to help avoid kickback and other forces which can

result in serious injury.

nents or the removal of safety devices may cause damage to the unit and possible injury to the operator or by- standers. Use only Craftsman acces- sories and replacement parts as rec- ommended. Never modify your saw.

•Maintain chain saw with care.

•Keep unit sharp and clean for better and safer performance.

_,_\ _,_ Kickback Path

Avoid Obstructions

Clear The

Working Area

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operators Manual Plan Ahead ONE Year Full Warranty on Craftsman GAS Chain SAWGuard Against Kickback Carburetor AdjustmentMaintain Your SAW in Good Working Order Handle Fuel with CautionReduce the Chance Kickback Avoid Pinch-KickbackAvoid Putl-ln WE do not REP Chain BrakeCarton Contents AssemblyModel Chain Tension ON/STOP SwitchCHOKE/FAST Idle Lever Primer BulbStarting Position Guide BAR and Chain OILFueling Engine Stopping Your EngineDifficult Starting or 8tatting a flooded engine Starting a Warm EngineBraking function control Inertia activating function controlOperating Tips Hinge holds tree on stump and helps control fall Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Important PointsPruning Using a support standLimbing and Pruning Iiwarning LimbingResponsibilities Hand tighten onlyt Check Chain SharpnessCheck Guide BAR Check Fuel Mixture Level Clean AIR FilterInspect and Clean Unit and Decals Check Chain BrakeTool8 required To Replace Chain Chain ReplacementChain Adjustment LoosenJustment Other Seasonal StorageFuel System EngineTroubleshooting Table Trouble CauseRemedy Remedy TroubleYour Warranty Rights What is Covered Repair orOff-road engine is purchased. Length of Coverage This war MAINTENANCE, Replacement and Repair Repair Parts Sears CHAtNSAW Model

358.35161 specifications

The Craftsman 358.35161 is a reliable and powerful gas-powered string trimmer designed for homeowners and landscaping enthusiasts alike. Known for its robust performance, this trimmer offers a blend of innovation, comfort, and efficiency.

One of the standout features of the Craftsman 358.35161 is its 25cc 2-cycle engine. This engine provides ample power to tackle tough weeds, grasses, and overgrowth while delivering a user-friendly experience. The lightweight design of this trimmer, weighing approximately 10 pounds, also enhances its maneuverability, allowing users to navigate around gardens, flower beds, and landscaping projects with ease.

The Craftsman 358.35161 incorporates a straight shaft design, which is particularly advantageous for reaching under shrubs and in tight spaces. This design not only promotes better balance and control but also allows for greater reach, making it easier to access hard-to-reach areas. The 17-inch cutting swath ensures that users can cover a significant area in a single pass, improving efficiency during use.

Comfort is a priority with the Craftsman 358.35161, as evidenced by its cushioned grip handle and adjustable shaft length. These features combine to reduce operator fatigue during extended use, allowing users to work for longer periods without discomfort.

The trimmer is equipped with a dual line, bump-feed cutting system, which makes it easy to advance the line without stopping the engine. This system also allows for quick line replacement, enabling users to get back to work with minimal downtime. The 0.095-inch line thickness ensures effective cutting power while also being durable enough to withstand regular use.

A notable technological feature of the Craftsman 358.35161 is its Easy Start System, designed to simplify the starting process. This system reduces the amount of effort needed to start the engine, allowing for a smoother, quicker ignition every time. The fuel-efficient engine also contributes to fewer emissions, making it a more environmentally friendly choice compared to older models.

In summary, the Craftsman 358.35161 is an excellent choice for anyone looking for a versatile and efficient string trimmer. With its lightweight design, powerful engine, user-friendly features, and innovative technologies, it stands out as a reliable tool for maintaining beautiful landscapes. Whether you’re tackling simple yard maintenance or more demanding landscaping tasks, the Craftsman 358.35161 proves itself to be a valuable ally in your gardening endeavors.
Top Page Image Contents