Craftsman 358.35161 manual Trouble, Remedy

Page 22

TROUBLESHOOTING TABLE - Continued

TROUBLE

Chain does not move when en-

gine is acceler- ated

Chain clatters

or cuts roughty.

Chain stops within the cut.

Chain cuts at

an angle.

CAUSE

t. Chain tension too tight.

2.Carburetor requires adjustment

3.Guide bar rails

pinched. 4-.C_utchslipping

5.Chain brake engaged. t. Chain tension incorrect.

2.Cutters damaged.

3.Chain worn

4.Cutters dulI, improperly sharpened, or depth gauges too high.

5.Sprocket worn.

6.Chain insta}led backwards.

1.Chain cutter tops not filed flat.

2 Guide bar burred or bent; rails uneven.

3 Clutch slipping.

t Cutters damaged on one side.

2Chain duII on one side

3Guide bar bent or worn.

REMEDY

1.See "Check Chain Tension" in the Maintenance Section

2.Contact Sears Service (see back cover)

3.Repair or replace.

4.Contact Sears Service (see back cover)

5.Disengage chain brake

1.See "Check Chain Tension" in the Maintenance Section.

2 Contact Sears Service (see back cover).

3.Resharpen or replace chain.

4.See "Chain Sharpening" in the Service and Adjustments Section.

5.Contact Sears Service (see back cover).

6Install chain in right direction.

1.See "Chain Sharpening" in the Service and Adjustments Section.

2 Repair or replace guide bar

3.Contact Sears Service (see back cover).

1.See "Chain Sharpening" in the Service and Adjustments Section

2.See 'Chain Sharpening" in the Service and Adjustments Section

3.Replace guide bar

tf situations occur which are not covered in this manual, use care and good

judgement, tf you need assistance, contact Sears Service or the CUSTOMER ASSISTANCE HELPUNE at t-800-235-5878,

22

Image 22
Contents Operators Manual ONE Year Full Warranty on Craftsman GAS Chain SAW Plan AheadHandle Fuel with Caution Carburetor AdjustmentMaintain Your SAW in Good Working Order Guard Against KickbackAvoid Pinch-Kickback Reduce the Chance KickbackAvoid Putl-ln Chain Brake WE do not REPAssembly Carton ContentsModel Primer Bulb ON/STOP SwitchCHOKE/FAST Idle Lever Chain TensionStopping Your Engine Guide BAR and Chain OILFueling Engine Starting PositionStarting a Warm Engine Difficult Starting or 8tatting a flooded engineInertia activating function control Braking function controlOperating Tips Notch CUT and Felling the Tree Tree Felling TechniquesFelling Large Trees Hinge holds tree on stump and helps control fallImportant Points Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Types of Cutting Used for BuckingLimbing Using a support standLimbing and Pruning Iiwarning PruningResponsibilities Check Chain Sharpness Hand tighten onlytCheck Guide BAR Check Chain Brake Clean AIR FilterInspect and Clean Unit and Decals Check Fuel Mixture LevelTool8 required Chain Replacement To Replace ChainLoosen Chain AdjustmentJustment Engine Seasonal StorageFuel System OtherTrouble Cause Troubleshooting TableRemedy Trouble RemedyWhat is Covered Repair or Your Warranty RightsOff-road engine is purchased. Length of Coverage This war MAINTENANCE, Replacement and Repair Repair Parts Sears CHAtNSAW Model

358.35161 specifications

The Craftsman 358.35161 is a reliable and powerful gas-powered string trimmer designed for homeowners and landscaping enthusiasts alike. Known for its robust performance, this trimmer offers a blend of innovation, comfort, and efficiency.

One of the standout features of the Craftsman 358.35161 is its 25cc 2-cycle engine. This engine provides ample power to tackle tough weeds, grasses, and overgrowth while delivering a user-friendly experience. The lightweight design of this trimmer, weighing approximately 10 pounds, also enhances its maneuverability, allowing users to navigate around gardens, flower beds, and landscaping projects with ease.

The Craftsman 358.35161 incorporates a straight shaft design, which is particularly advantageous for reaching under shrubs and in tight spaces. This design not only promotes better balance and control but also allows for greater reach, making it easier to access hard-to-reach areas. The 17-inch cutting swath ensures that users can cover a significant area in a single pass, improving efficiency during use.

Comfort is a priority with the Craftsman 358.35161, as evidenced by its cushioned grip handle and adjustable shaft length. These features combine to reduce operator fatigue during extended use, allowing users to work for longer periods without discomfort.

The trimmer is equipped with a dual line, bump-feed cutting system, which makes it easy to advance the line without stopping the engine. This system also allows for quick line replacement, enabling users to get back to work with minimal downtime. The 0.095-inch line thickness ensures effective cutting power while also being durable enough to withstand regular use.

A notable technological feature of the Craftsman 358.35161 is its Easy Start System, designed to simplify the starting process. This system reduces the amount of effort needed to start the engine, allowing for a smoother, quicker ignition every time. The fuel-efficient engine also contributes to fewer emissions, making it a more environmentally friendly choice compared to older models.

In summary, the Craftsman 358.35161 is an excellent choice for anyone looking for a versatile and efficient string trimmer. With its lightweight design, powerful engine, user-friendly features, and innovative technologies, it stands out as a reliable tool for maintaining beautiful landscapes. Whether you’re tackling simple yard maintenance or more demanding landscaping tasks, the Craftsman 358.35161 proves itself to be a valuable ally in your gardening endeavors.